Health Master YD-2089 Manual de usuario
HealthMaster™ Blender
OWNER’S MANUAL
3
important safeguards/specications 4
parts & accessories 5
assembling the HealthMaster™ Blender 6 - 9
using your HealthMaster™ Blender 10
controls 11
using the tamper 12
HealthMaster™ Blender helpful hints 13
cleaning and maintenance 13 - 14
frequently asked questions 15
warranty information 16
troubleshooting 17
replacement parts order form 18
table of contents
4
IMPORTANT Read this manual carefully and completely before
attempting to operate the HealthMaster™ Blender. Failure to do so could
result in serious personal injury.
• Blades are sharp. Handle carefully.
• Children should not be permitted to operate this, or any other kitchen appliance, without the
constant supervision of a qualied adult.
• Do not attempt any home repairs to this unit. Should the unit require repair, such repair should
only be performed by a qualied professional.
• Unit For Indoor Use Only. To reduce the risk of electric shock, never expose any part of this
appliance including the power cord, plug or motorized Base to rain, moisture or immersion in
liquids of any kind.
• The unit has a polarized plug. One prong is narrower than the other and it will t only one way into
an electrical outlet. Never force the plug into the outlet. If it doesn’t t after trying it one way and
then reversing it … contact an electrician. Do not modify the plug in any way.
• Never use an adaptor or an extension cord.
• Never assemble, disassemble or handle the unit while it is plugged into an electrical outlet. Keep
unplugged when not in use.
• The HealthMaster™ Blender comes equipped with a Tamper. This is the only utensil you should
ever use while operating this unit. Using other utensils may damage the unit and cause possible
personal injury.
• To prevent overheating, do not block any ventilation intake openings (see page 5).
• Use on a dry, stable surface.
WARNING: Failure to follow these instructions
can result in death, re, or electric shock.
IMPORTANT SAFEGUARDS
• When preparing fresh baby food always consult with your physician (pediatrician) before making any dietary
changes. Certain fruits and vegetables are not recommended for infants or young children due to immature
digestive systems, allergies, or other developmental reasons.
• When preparing fresh baby food, to prevent choking, always make sure all fruits and vegetables are
completely liqueed before feeding them to a baby.
• To avoid personal injury: Never remove the Lid while the motor is running. If something is stuck press the
OFF button, wait for motor to stop running, unplug the unit then remove the Cap only, insert the Tamper to
dislodge stuck food. If food remains stuck, disassemble and remove the blocked food.
• Make sure the Pitcher is attached properly and securely locked before pressing the ON button. HealthMaster™
Blender will not operate unless the Pitcher is in locked position.
• Never use hands, ngers, or other utensils to insert food into the Pitcher. Use the Tamper only.
• Never leave the HealthMaster™ Blender unattended while motor is running.
• Never add ingredients to the HealthMaster™ Blender while unit is running at a speed of higher than #1.
• We do not recommend pressing the RUN button when the Pitcher is empty.
• Always use one hand to hold the Pitcher handle as this unit operates at high speeds.
• Never put fruits with pits in the HealthMaster™ Blender. Remove pits prior to placing items into the Pitcher.
• The maximum capacity is 50 oz. or 1500 ml. Use signicantly less with thicker ingredients.
• Always make sure the Lid and E-Z Lock Cap are securely in the locked position before use.
• Do not let cord come in contact with stove, other hot surfaces or hang over edge of table or counter.
SPECIFICATIONS: Model YD-2089 120 VAC 60Hz 700W.
SAVE THESE INSTRUCTIONS
5
parts and accessories
IMPORTANT: Your HealthMaster has been shipped with the following
components. Check everything carefully before use. If any part is missing or has
been damaged in shipping do not use this product and contact shipper using
the customer service number located in the back of this owner’s manual.
Pitcher Safety Interlock
LCD Display
Speed Buttons
ON/OFF Button
PULSE - RUN/STOP - ICE Buttons
Motor Housing Base
Side Ventilation Intake Openings
Non-Skid Feet
Safety Valve Release
E-Z Lock Cap
Lid
Handy Tab
for easy open & close
50-oz. Pitcher
E-Z Grip Handle
Base
Tamper
6
assembling the HealthMaster™ Blender
BEFORE ASSEMBLING: Unwind
power cord to desired length.
WARNING: Do not plug power
cord into electrical outlet until
unit is fully assembled.
1. Place the motor Base on
a stable, dry surface.
This appliance was designed
with built-in power cord storage
beneath the Base. (See Figure A)
Store the excess length of cord
neatly underneath to avoid
accidental tipping of machine
while in use. Power to unit will not
take place unless steps 1 – 6 in this
section are followed carefully.
Fig. A
7
2. Firmly seat the Pitcher onto
the motor Base while aligning
the white dot on the Pitcher
with the REMOVE symbol on
the Base. (See Figure B)
Fig. B
Fig. C3. Rotate the Pitcher clockwise until
the dot symbol on the Pitcher
aligns with the Arrow symbol on
the Base. (See Figure C) The Pitcher
will lock into place and engage the
Pitcher Safety Interlock Switch.
Note: There are 4 white dots on
your Pitcher. Align the Arrow symbol
with any of the 4 dots to activate the
Pitcher Safety Interlock Switch.
assembly (cont.)
8
assembly (cont.)
4. Insert the E-Z Lock Cap into the Lid
(aligning the Cap’s tabs with the Lid’s
slots) and turn clockwise to lock.
NOTE: While the power is ON and as air
pressure inside the Pitcher increases, the
Safety Valve will automatically be pushed
upward to release pressure. Prior to use,
make certain that the Safety Valve is free
of any obstruction and moves up and
down freely.
TabsSafety
Valve
NOTE: At this point you may want to place the ingredients for processing into the unit. Insert ingredients
into the Pitcher, soft foods rst, harder items last. The E-Z Lock Cap can be removed during operation to
add additional ingredients or to insert the Tamper. The E-Z Lock Cap should only be removed at speed #1.
Always replace Cap when you are nished inserting Tamper or additional ingredients.
9
5. Place Lid on the Pitcher and push rmly
down into place.
6. Make sure the unit is assembled
properly before connecting the power
cord to the electrical outlet. Once
plugged in and ON/OFF button is
pushed, ON/OFF lamp turns red and
LCD display turns on to show you have
assembled the blender properly.
assembly (cont.)
10
using the HealthMaster™ Blender
1. After assembling and plugging in the blender, you have to push
ON/OFF button, then ON/OFF lamp turns red and LCD display
turns on to show you have assembled the blender properly.
2. BEFORE pushing the RUN, PULSE, or ICE button — hold the top
of the assembled unit to prevent tipping when starting.
3. After pushing the ON/OFF button wait until the Blades
completely stop spinning and unit is unplugged before
removing the Cap, Lid or the Pitcher.
NOTE: Unit will not turn on until Pitcher Safety Interlock is fully
rotated to the locked position.
Tabla de contenidos
Otros manuales de Licuadora de Health Master
