HealTech Electronics MM-T02 Manual de usuario

MM-T02 User Manual [rev. 001] | www.healtech-electronics.com/MM 1/2

1. Foreword

2. Features

3. Warranty

4. Specifications

Before using this product please ensure the bike

is compatible with this tool. See the part number

on the packaging and use the Product Advisor

on our website to check compatibility. For more

information on this product, please visit:

www.healtech-electronics.com/MM

Congratulations on your purchase of a

Maintenance Mate service light reset tool.

Products from HealTech Electronics Ltd. are the

most advanced aftermarket accessories and

maintenance tools for motorcycles.

The Maintenance Mate is compatible with

a wide range of Triumph motorcycles (2010

onwards, depending on model) that have a service

interval indicator light (small wrench symbol) on the

dashboard.

When the ignition key is switched on and the

distance to service is 800 km (500 miles) or less, the

service symbol will be displayed for 3 seconds and

the dash will show the distance remaining.

When the remaining distance is 0 km (0 miles),

the service symbol will stay permanently on until

the service has been carried out and the service

interval & date has been set. If the service is

overdue, the distance will be displayed as a negative

number or you will see an OVERDUE warning with

the wrench symbol (depending on the bike model).

The Maintenance Mate will set the service

interval & date on the bike without the need for a

complex and expensive OBD tool. Faster, easier and

more efficient for busy workshops.

 Touch control

Set the next interval with ease using the touch

pads. The touch-sensitive area is marked with

arrow signs pointing up and down on the face of

the unit.

 Built to last

- Rugged design, encased in epoxy resin.

- Only high-quality SMD components used.

- Each unit is extensively tested prior to shipping.

- Oil and water resistant (IP68).

 Cost effective option

Save on service bills! The MM is an economical

solution for bike owners who can do their own

maintenance.

Save on servicing time! No need for laptops or

dedicated OBD tools. Faster turnaround and

lower costs for workshops.

 Light and small

The unit itself is hardly larger than the OEM

diagnostic connector it connects to.

HealTech Electronics Ltd. guarantees this product

against defects in material and workmanship for a

period of two (2) years.

The warranty period starts from the date of the

original purchase as shown on the invoice.

- Supply voltage: +8V to +24V

- Max. supply current at 12V: 60 mA

- Operating temp: -40°C to +80°C (-40°F to +176°F)

- Waterproof (IP68)

- Size: 59 x 35 x 17 mm (2.3 x 1.4 x 0.7 inches)

- Reverse polarity and transient protection

Service light reset tool for Triumph motorcycles | Model: MM-T02

Maintenance Mate

User Manual

5. Cleaning and storing the unit

Clean the unit with a wet sponge. Use water only, without any detergents. Do not clean with a dry cloth

as it may scratch the front face.

MM-T02 User Manual [rev. 001] | www.healtech-electronics.com/MM 2/2

6. Operation

- If the speedometer is set to MPH reading, change

the indication in the dash menu from MPH to Km/h.

- Locate the BLACK, 16-pole diagnostic connector

(usually it’s under the rider’s seat in a black

rubber boot).

- Connect the MM unit.

- Make sure the engine stop switch is in the RUN

position, the ignition key is switched ON and the

gearbox is in Neutral. Do NOT start the engine.

- Now a number (0-20) should appear on the

display of the unit, depending on the last

successful upload. Otherwise, check that the

connectors are fully mated and there are no bent

terminals.

- The service interval can be set between

0-20,000 km.

- Now set the desired service date as well,

otherwise the OVERDUE message won’t

disappear from the Service menu.

- After setting the service date, check in the service

menu, whether both service Interval and date is

successfully set or not. If yes, you’re all set.

 Changing the value

With the UP and DOWN arrow symbols select the desired value between 0 and 20,000 km.

Tap and release one of the touch pads. The number changes when you release the pad.

Holding the pad continuously will not alter the value.

 Setting the service interval

Touch and hold both the UP and DOWN arrow keys. After about 3 seconds the ‘UP’ sign will flash a few

times on the display, indicating the upload was successful. Release the touch pads.

If the upload fails, an ‘Er’ (Error) sign will appear. Check that this motorcycle actually has a service interval

indicator. If so, repeat the steps described in chapter 5 and try setting a lower service interval.

Note:

- If you perform the upload more than once, only the last uploaded interval will be set.

- If you attempt to set a value higher than valid for a particular motorcycle, the highest valid value will be

set. Please refer to the bike’s Service Manual.

 Setting the service date

As soon as you uploaded the service interval value, a ‘d1’ sign will appear and a number right after. ‘d1’

stands for the year in the service date. Select the desired value and hold both the UP and DOWN arrow

keys for about 3 seconds. A ‘d2’ sign will appear, which stands for the month of the service date. Set it the

same way as the year. Now a ‘d3’ will appear, which is the day of the service date. Set the desired value

and hold both the UP and DOWN arrows for 3 seconds. The ‘UP’ sign will flash a few times on the display,

indicating the upload was successful.

 Verifying the stored service interval and service date

- Turn the ignition key off, wait at least 5 seconds then turn on again. Make sure the engine stop switch is

in the RUN position and the gearbox is in Neutral.

- Scroll through the menu of the bike’s instrument panel to the SERVICE menu. There you find both the

service distance and the service date.

- If the desired value is shown, disconnect the MM tool. Otherwise, repeat the process.

- If the speedometer was in MPH reading prior to the procedure, change the indication in the dash menu

back from Km/h to MPH.

 Displayed values and their meanings

The service interval is set to 0 and

the small wrench symbol lights up.

Sets 100, 200, 300, … 900

Sets 1,000, 2,000, 3,000, … 9,000

Sets 10,000, 11,000, 12,000, …

20,000

Error - setting the service interval

failed.

Upload - the selected service

interval was uploaded successfully.

Adjusts the year of

the service date

Adjusts the month

of the service date

Adjusts the day of

the service date

Otros manuales de Accesorios para motocicletas de HealTech Electronics

HealTech Electronics

HealTech Electronics iQSE-1 + QSH-P2T Instrucciones y recetas

HealTech Electronics

HealTech Electronics Advanced Rider Assistant Manual de usuario

HealTech Electronics

HealTech Electronics iQSE-1 Instrucciones y recetas

HealTech Electronics

HealTech Electronics QUICKSHIFTER EASY Instrucciones y recetas

HealTech Electronics

HealTech Electronics iLogger easy Instrucciones y recetas

HealTech Electronics

HealTech Electronics GIpro DS Series Manual de usuario

HealTech Electronics

HealTech Electronics GIpro DS Series Manual de usuario

HealTech Electronics

HealTech Electronics iLogger easy Instrucciones y recetas

HealTech Electronics

HealTech Electronics iLogger easy Instrucciones y recetas

HealTech Electronics

HealTech Electronics iLE-1-KIT Manual de usuario

HealTech Electronics

HealTech Electronics QuickShifter Manual de usuario

HealTech Electronics

HealTech Electronics Advanced Rider Assistant Instrucciones y recetas

HealTech Electronics

HealTech Electronics QuickShifter easy Instrucciones y recetas

HealTech Electronics

HealTech Electronics Maintenance Mate Instrucciones y recetas

HealTech Electronics

HealTech Electronics SpeedoHealer SH-V4-C Instrucciones y recetas

HealTech Electronics

HealTech Electronics SH-HY1 Manual de usuario

HealTech Electronics

HealTech Electronics GIPRO GPXT Instrucciones y recetas

HealTech Electronics

HealTech Electronics MM-BM1 Manual de usuario

HealTech Electronics

HealTech Electronics BLP-U04 Instrucciones y recetas

HealTech Electronics

HealTech Electronics GIpro DS Series Manual de usuario

HealTech Electronics

HealTech Electronics GIPRO X-TYPE Instrucciones y recetas

HealTech Electronics

HealTech Electronics iLogger easy iLE-1-KIT Instrucciones y recetas

HealTech Electronics

HealTech Electronics GIpro w/ATRE Manual de usuario

HealTech Electronics

HealTech Electronics QuickShifter easy Instrucciones y recetas

Manuales populares de Accesorios para motocicletas de otras marcas

SRC

SRC B-TRK502-01-01-SL Manual de usuario

3M Speedglas 9100 MP Manual de usuario

hepco & becker

hepco & becker 6307520 00 01 Manual de usuario

HOMCOM

HOMCOM AA0-077 Manual de usuario

hepco & becker

hepco & becker 6307558 00 01 Manual de usuario

Wunderkind Custom

Wunderkind Custom 106503-F15 Guía del usuario

Dräger

Dräger HPS 3500 Manual de usuario

M-WAVE

M-WAVE SKI Manual de usuario

Kuryakyn

Kuryakyn 6212 Manual de usuario

hepco & becker

hepco & becker 6507504 00 01 Manual de usuario

Tool it

Tool it PROMAX LCD 9.13G Manual de usuario

Custom Dynamics

Custom Dynamics TruWrapz Manual de usuario

Roof

Roof RO200 CARBON Manual de usuario

Kabuto

Kabuto Japan IBUKI Manual de usuario

PUIG

PUIG 5051 Manual de usuario

rizoma

rizoma ZTH050 Manual de usuario

Joubert

Joubert 10001711 Manual de usuario

Sperian

Sperian Optrel p420 Manual de usuario