HBK 2255 Manual de usuario

HBK 2255 Sound Level Meter with an App

Getting Started

www.bksv.com/2255 BR 1904 – 11 ËBR-1904---:Î

What you will need

From the box: Scan QR code®for downloads:

Not included in the box: HBK apps:

1) HBK 2255 Sound Level Meter

2) USB Cable AO-0821

3) Windscreen UA-1650

4) Power Supply

5) Sound Calibrator Type 4231 (if

ordered with SLM)

iPhone®installed with one

or more mobile apps*

(* Install from App Store)

• Noise Partner

• Building Acoustics

• Environmental Noise

• Product Noise

•WorkNoise

•ExhaustNoise

PC with Internet and

installed with one or more

desktop app*

(* Install from bksv.com)

www.bksv.com/support

About the SLM

1) Microphone + preamplifier

pair

2) Controls:

• Push , , and to

scroll menus and displays

• Push to select/

confirm

• Push to start/pause

measurement

•Push tostop/reset

measurement

3) Display

4) Status LED

To replace microphone + pre-

amplfier pair, grip the ridged

part on the bottom half of the

preamplifier:

• Pull away from the SLM to

disconnect

• Push into the SLM to connect

Avoid gripping other parts of the

preamplifier when replacing.

Note during connection:

• The ridges on the preamplifier

• The red dot should align with

red mark on SLM

Control the measurement

On the SLM:

On the mobile device with HBK app:

Scroll Up/Down

Push to cycle through displays

Status LED

• Green (steady):

Measuring;

Calibrating

• Yellow (slow pulse):

Idle

• Yellow (fast pulse):

Paused

• Red (fast pulse):

Instantaneous

overload

• Purple (steady):

Latched overload

Scroll Left/Right

Push to cycle through parameters

Stop/Reset

Push to stop. Push again to reset

Start/Pause

Push to start. Push again to pause

Stop/Reset

Swipe to stop. Tap to reset measure-

ment

Add Annotation

Tap to open menu. Select between

note, video, photo or voice

Start/Pause

Tap to start. Swipe to pause measure-

ment

After measuring

Transfer data to the

PC.

1) Connect via USB

cable, Wi-Fi®.

Transfer data to the

PC.

2) Click in the

PC app to import

and select the

instrument.

Transfer data to the

PC.

3) Select the meas-

urements and pro-

jects you want to

transfer and click

Import.

Charge the SLM.

Use the supplied

power supply.

HBK2255-xxxxxx

Measurement 1

Import

Measurement 2

Perform a trial measurement

1) Hold 2 seconds to

power on the SLM.

2) To measure outdoors, insert

the windscreen over the

microphone.

3) Push to start measur-

ing. The LED ring will light

green.

Push to pause and

resume the measurement.

4) Push to stop measuring.

Perform a calibration check

Ensure that the SLM is not measuring and the windscreen is removed.

1) Carefully place the calibrator

onto the microphone.

2) Push the On/Off button on

the calibrator.

When the SLM detects the

signal, it will show Calibra-

tion Check.

3) Confirm you want to run the

check.

Push to confirm.

4) Switch off the calibrator and

remove it from the SLM.

Push to confirm.

Calibraon

Check

YES

Connect the app to the SLM

1)Enable Bluetooth®on your device. 2)Open your app. 3)Allow the app access to the mobile

device’s location and microphone.

4)Select the SLM to connect. 5)Confirm the selection on SLM. 6)Select the Wi-Fi mode.

Bluetooth

Settings Instruments

BK2245-xxxxxx

Instruments Wi-Fi Mode

Set up the SLM

1) Tap the green SLM icon to open the

menu.

2) Select from the menu:

•System Settings: to set regional,

power and network settings

•Display Settings: to adjust screen

and display settings

•Measurement Settings: to set up

control settings and input and

measurement parameters

3) Tap the app icon or ?* to open help

and learn more about your SLM and

how to use it.

* Tap ?in Work Noise Partner.

Perform a trial measurement

1) Hold 2 seconds to

power on the SLM.

2) To measure outdoors, insert

the windscreen over the

microphone.

3) Push to start measur-

ing. The LED ring will light

green.

Push to pause and

resume the measurement.

4) Push to stop measuring.

Perform a calibration check

Ensure that the SLM is not measuring and the windscreen is removed.

1) Carefully place the calibrator

onto the microphone.

2) Push the On/Off button on

the calibrator.

When the SLM detects the

signal, it will show Calibra-

tion Check.

3) Confirm you want to run the

check.

Push to confirm.

4) Switch off the calibrator and

remove it from the SLM.

Push to confirm.

Calibraon

Check

YES

Connect the app to the SLM

1)Enable Bluetooth®on your device. 2)Open your app. 3)Allow the app access to the mobile

device’s location and microphone.

4)Select the SLM to connect. 5)Confirm the selection on SLM. 6)Select the Wi-Fi mode.

Bluetooth

Settings Instruments

BK2245-xxxxxx

Instruments Wi-Fi Mode

Set up the SLM

1) Tap the green SLM icon to open the

menu.

2) Select from the menu:

•System Settings: to set regional,

power and network settings

•Display Settings: to adjust screen

and display settings

•Measurement Settings: to set up

control settings and input and

measurement parameters

3) Tap the app icon or ?* to open help

and learn more about your SLM and

how to use it.

* Tap ?in Work Noise Partner.

HBK 2255 Sound Level Meter with an App

Getting Started

www.bksv.com/2255 BR 1904 – 11 ËBR-1904---:Î

What you will need

From the box: Scan QR code®for downloads:

Not included in the box: HBK apps:

1) HBK 2255 Sound Level Meter

2) USB Cable AO-0821

3) Windscreen UA-1650

4) Power Supply

5) Sound Calibrator Type 4231 (if

ordered with SLM)

iPhone®installed with one

or more mobile apps*

(* Install from App Store)

• Noise Partner

• Building Acoustics

• Environmental Noise

• Product Noise

•WorkNoise

•ExhaustNoise

PC with Internet and

installed with one or more

desktop app*

(* Install from bksv.com)

www.bksv.com/support

About the SLM

1) Microphone + preamplifier

pair

2) Controls:

• Push , , and to

scroll menus and displays

• Push to select/

confirm

• Push to start/pause

measurement

•Push tostop/reset

measurement

3) Display

4) Status LED

To replace microphone + pre-

amplfier pair, grip the ridged

part on the bottom half of the

preamplifier:

• Pull away from the SLM to

disconnect

• Push into the SLM to connect

Avoid gripping other parts of the

preamplifier when replacing.

Note during connection:

• The ridges on the preamplifier

• The red dot should align with

red mark on SLM

Control the measurement

On the SLM:

On the mobile device with HBK app:

Scroll Up/Down

Push to cycle through displays

Status LED

• Green (steady):

Measuring;

Calibrating

• Yellow (slow pulse):

Idle

• Yellow (fast pulse):

Paused

• Red (fast pulse):

Instantaneous

overload

• Purple (steady):

Latched overload

Scroll Left/Right

Push to cycle through parameters

Stop/Reset

Push to stop. Push again to reset

Start/Pause

Push to start. Push again to pause

Stop/Reset

Swipe to stop. Tap to reset measure-

ment

Add Annotation

Tap to open menu. Select between

note, video, photo or voice

Start/Pause

Tap to start. Swipe to pause measure-

ment

After measuring

Transfer data to the

PC.

1) Connect via USB

cable, Wi-Fi®.

Transfer data to the

PC.

2) Click in the

PC app to import

and select the

instrument.

Transfer data to the

PC.

3) Select the meas-

urements and pro-

jects you want to

transfer and click

Import.

Charge the SLM.

Use the supplied

power supply.

HBK2255-xxxxxx

Measurement 1

Import

Measurement 2

Otros manuales para 2255

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario