Haws 3202 Guía

12/17 Model 3202/3202G Page 1 of 4

No. 2077328 (25)

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: Info@hawsco.com  website: www.hawsco.com

Model 3202/3202G

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material

or poor workmanship for a period of one year from date of shipment. HAWS

liability under this warranty shall be discharged by furnishing without charge F.O.B.

HAWS Factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided that

claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made, the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS,

Sparks, Nevada. HAWS will not be liable for any damages caused by defective

materials

or poor workmanship, except for replacements, as provided above. Buyer

agrees that HAWS shall not be liable for general, special, or consequential

damages claimed to arise under the contract of sale. The drinking fountain

manufactured by HAWS is warranted

to function if installation and maintenance

instructions provided are adhered to. The units also must be used for the purpose

for which they were intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

12/17 Model 3202/3202G Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12"

adjustable wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket

wrench or open end wrench.

LOCATION OF UNIT: The Model 3202/3202G Drinking Fountain is a wheelchair

accessible drinking water facility. The height dimensions shown, meet current ADA

requirements. When installing this unit, local, state or federal codes should be adhered

to. If height other than shown is required, then dimensions must be adjusted

accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6

ATM) pressure. Where sediment or mineral content is a problem, an inlet filter is

recommended.

PLUMBING CONNECTIONS: Inlet is 1/4" IPS male fitting.

MAINTENANCE: Periodically clean the strainer. Refer to 5874 Series Valve Manual

for more information.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

Insufficient bubbler flow.

1a.

Check that inlet screwdriver stop valve is in

wide-open position.

Verify minimum 30 psi flowing supply

pressure.

Clean strainer. See 5874 Series Valve

Manual.

Adjust valve to increase flow. Use front

adjust screw or see 5874 Series Valve

Manual.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to

ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS® and other trademarks usedin these materials are the exclusive property of Haws Corporation.

OPTIONAL

APPROVED

DRAWN

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

D.OLLOM

11-25-95

0002077328

3202/3202G

1:4

02/23/18

3 OF 4

PARTS BREAKDOWN

5265

2017

PARTS BREAKDOWN

4REF

ROTATED 90° INTO VIEW

DETAIL A

REMOVE INSERT

WITH 5/16 HEX SOCKET

(NOT SUPPLIED)

NOTES:

1 5874PB (ITEM 1) INCLUDES VRK5874 CARTRIDGE ASSEMBLY

(ITEM 2) AND PBA7 RECESSED PUSH BUTTON (ITEM 3).

2 ENSURE TUBE IS DISCONNECTED FROM PUSH BUTTON VALVE

BODY PRIOR TO REMOVAL. APPLY ONE DROP OF LOCTITE

222MS TO NOZZLE THREADS PRIOR TO FASTENING BACK ONTO

BUBBLER HEAD. RE-ATTACH TUBE TO VALVE.

BUBBLER HEAD ASSEMBLY, PCP

DESCRIPTION

ITEM 3202/3202G

5703M

VRK5874VALVE REPAIR KIT

PBA7

6250LF

0006983506

BUTTON ASSEMBLY, PUSH, 5874

BIB FAUCET (OPTIONAL)

SPANNER WRENCH

BUTTON, PUSH, RECESSED, PCP W/ VALVE 5874PB

(NOT SHOWN

SEE DETAIL A)

1/2-13UNC X 6"

LONG ANCHORS 4X

SCREWDRIVER STOP

(NOT SUPPLIED)

TROUGH FLOW

CORROSION PROTECTION.

178mm

7" MINIMUM

686mm

27"

33-1/2"

851mm

AIR GAP PROVIDED FOR

HEAVY DUTY ACCESS PANELS

WITH VANDAL RESISTANT

SCREWS.

LOCAL GROUND CONDITIONS).

FILL, MAY VARY DEPENDING UPON

30 CUBIC FEET MINIMUM POROUS

DRAIN PIT IF DESIRED. RECOMMEND

SEWER DRAIN (OR POROUS FILL

SLOPE CONCRETE TO FLOOR TYPE

TROUGH DRAIN

(NOT SUPPLIED)

FLOOR DRAIN

772mm

30-3/8"

IMPORTANT: ATTENTION INSTALLER

USE CARE TO AVOID KINKS WHEN ROUTING SUPPLY

LINE TO VALVE AND FROM VALVE TO BUBBLER

254mm

10"

MOUNTING DETAIL

178mm PEDESTAL

TEMPLATE

MTG BOLTS 4X

1/2"-13 UNC

1/2" ANCHOR BOLTS

MOUNTING HOLES FOR

(SUPPLIED)

IN CONCRETE SLAB 4X

1/2" IPS SUPPLY

191mm

7-1/2" BUBBLER

BIB FAUCET

STEEL FOUNTAIN

6250LF

OPTIONAL HOSE BIB DETAIL

1/2" NPT INLET

25mm

(SUPPLIED).

(BY OTHERS.)

CONCRETE SLAB

30" SQUARE

38mm

1-1/2"

(TO SPOUT

OUTLET)

1 REFER TO 5874 SERIES OPERATION AND MAINTENANCE MANUAL FOR

PUSH BUTTON AND VALVE INSTALLATION/MAINTENANCE INSTRUCTIONS.

NOTES:

6250LF

BIB FAUCET

OPTIONAL

1/2" NPT

STOP, COMPRESSION

TUBING (NOT SUPPLIED)

FITTINGS, & 3/8" O.D.

SCREWDRIVER

(SUPPLIED)

1/2" TEE

1/2" NPT

(OPTIONAL)

1/2" TUBING AND

COMPRESSION FITTINGS

(NOT SUPPLIED)

APPROVED:

DRAWN:

PART NUMBER

SCALE: SHEET OF

REVISION

DRAWING TYPE: SIZE: A

BY:ECN NO.

PAGE

DATE:

ECN:

REVISED PER

CHK'D.:

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

C. HAYES

11/91

0002077328.D

3202/3202G

1:14

02/23/18

4 OF 4

INSTALLATION

5265

2018

Este manual sirve para los siguientes modelos

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario