Hawking Net-Vision HNC700PT Manual de usuario
Management & Control Software User’s Manual
- –
1
Contents
Chapter 1 Installation................................................................................................ 1-3
1.1 System Hardware Requirements.............................................................. 1-3
1.1.1 Recommended minimum system hardware requirements .............. 1-3
1.2 Software Installation ................................................................................ 1-4
1.3 First Start up............................................................................................. 1-9
Chapter 2 Launcher ................................................................................................ 2-10
2.1 Security for Launcher ............................................................................ 2-10
2.2 User Interface..........................................................................................2-11
Chapter 3 Monitor .................................................................................................. 3-13
3.1 Features of Monitor Tool ....................................................................... 3-13
3.1.1 Traditional Surveillance Features ................................................. 3-13
3.1.2 Special Features ............................................................................ 3-13
3.2 Application Layout and Functionalities............................................ 3-14
3.3 Logging In.............................................................................................. 3-16
3.3.1 The Root Privilege ........................................................................ 3-16
3.3.2 The General User Privilege........................................................... 3-16
3.4 Camera Configurations .......................................................................... 3-17
3.4.1 The Layout of the Configuration .................................................. 3-17
3.4.2 Local Settings................................................................................ 3-18
3.4.3 Alert Settings and Recording Settings .......................................... 3-20
3.4.4 Changing the Camera Order in the List ........................................ 3-22
3.4.5 Saving the Changes....................................................................... 3-22
3.5 Global Settings....................................................................................... 3-23
3.6 Using Monitor Tool................................................................................ 3-29
3.6.1 Connection of the Video Server / Network Camera Series........... 3-29
3.6.2 The Layout .................................................................................... 3-34
3.6.3 Input/Output Control Tools........................................................... 3-38
3.6.4 Backup .......................................................................................... 3-41
3.6.5 About............................................................................................. 3-41
3.6.6 Miscellaneous Functions............................................................... 3-42
3.6.7 Common Control Functions.......................................................... 3-43
3.6.8 Multiple Focus .............................................................................. 3-45
3.6.9 Status Bar ...................................................................................... 3-45
- –
2
Chapter 4 Scheduling.............................................................................................. 4-47
4.1 Invoke Scheduling Tool ......................................................................... 4-48
4.1.1 Starting the Scheduling tool.......................................................... 4-48
4.2 The Layout and Functionalities ............................................................. 4-49
4.2.1 Introduction................................................................................... 4-49
4.2.2 The Functionalities of Configuration Components....................... 4-50
4.2.3 The Schedule Scheme operations ................................................. 4-50
4.3 Primary Schedule ................................................................................... 4-51
4.3.1 Schedule with Time Lines............................................................. 4-51
4.3.2 Schedule with Time Picker ........................................................... 4-53
4.3.3 Schedule in event mode ................................................................ 4-54
4.3.4 Schedule in Continuous mode ...................................................... 4-55
4.4 Secondary Schedule ............................................................................... 4-55
4.4.1 Schedule modes ............................................................................ 4-55
Chapter 5 Playback................................................................................................. 5-56
5.1 Features of Playback .............................................................................. 5-56
5.2 Logging In.............................................................................................. 5-57
5.3 Layout .................................................................................................... 5-58
5.3.1 Main Areas .................................................................................... 5-58
5.3.2 Indicators....................................................................................... 5-60
5.3.3 Pull Bar ......................................................................................... 5-61
5.4 Settings................................................................................................... 5-61
5.5 Normal (Single Frame) Mode................................................................ 5-63
5.5.1 Histogram Area ............................................................................. 5-64
5.6 Preview (Multiple Frame) Mode ........................................................... 5-65
5.6.1 Histogram Area ............................................................................. 5-66
5.6.2 Histogram Legend......................................................................... 5-67
5.7 Using Tools ............................................................................................ 5-68
5.7.1 Selector Tools................................................................................ 5-68
5.7.2 Play Control .................................................................................. 5-70
5.7.3 Display Adjustment Toolbox ........................................................ 5-71
5.7.4 Searching Range Adjustment Toolbox.......................................... 5-72
5.7.5 Toolbox ......................................................................................... 5-73
5.7.6 System Control Toolbox ............................................................... 5-75
Chapter 1 Installation
Chapter 1 Installation
1.1 System Hardware Requirements
Before installing the application software, make sure your system has the following
recommended minimum hardware requirements.
1.1.1 Recommended minimum system hardware
requirements
The system requirement recommended for this application is as follows.
OS: MS Windows 2000/XP
CPU: Intel 2.0 GHz Pentium IV or above and AMD Athlon or above
SDRAM: 256 MB SDRAM
Hard disk: 40 GB
Display Chip: nVidia, GeForce series with 32 MB Display memory
ATI Radeon series with 32 MB Display memory
Table 1-1 Recommended System Hardware Requirements
The following notes should help you with the proper installation of the software on to the
recommended hardware system.
This application software only supports Intel Pentium IV series or above and AMD Athlon
or above CPUs.
It is also recommended to run this application software on Win2000 OS to avoid any
functional limitation.
Make sure all Power Management and Screen Saver functions are turned off to avoid
system hang-ups.
Chapter 1 Installation
1.2 Software Installation
The following are steps for the software installation.
STEP 1: Put the Installation disk into the CD-ROM drive, and installation should start
automatically. If installation does not start, click on “Start” on the lower left corner of your
screen and open “My Computer” and double click on the CD-ROM icon. The IP surveillance
Recorder Installation Window will appear as Figure 1-1 in below.
Figure 1-1 Management & Control Software Installation Window
Management & Control Software User’s Manual
- – 1-5
STEP 2: There are links on this page, including Quick Installation Guide, View User’s Manual,
Release Note, and Install Software. Click on “Install Software” to launch the intallation shield.
The InstallShield Wizard will come on and Figure 1-2 will appear.
Figure 1-2 Welcome page for the Management & Control Software
STEP 3: If you click on “Next” and Figure 1-3 appears, it means you have installed a previous
version of the recording software (the previous version is the video-only version, which means it
would not get the audio stream from servers). If you want to keep the previous version, choose
the second option. If you are new to the Smart VS-IP recorder software, this window will not
appear; skip on over to Step 4.
Figure 1-3 Video only version detected
Chapter 1 Installation
- – 1-6
STEP 4: Click on “Next”and the “User information” window will appear as in Figure 1-4. This
window prompts you to enter a username, company name. Click on “Next” to continue.
Figure 1-4 User information for Management & Control Software
STEP 5: Set up the administrator’s password by entering a password and confirm the password
as shown in Figure 1-5. Click on “Next” to continue.
Figure 1-5 Confirm Password
Management & Control Software User’s Manual
- – 1-7
STEP 6: Select the installation directory for this application software and click on “Next”, as
shown in Figure 1-6. You can also change the installation directory from the Default directory by
clicking on “Browse…”
Figure 1-6 Destination Location for Installation
STEP 7: Select a program folder to install the application software into and then click on “Next”,
as shown in Figure 1-7.
Figure 1-7 Select Program Folder
Chapter 1 Installation
- – 1-8
STEP 8: After checking all the set up information shown in Figure 1-8, click on “Next” to start
file movement and registries update.
Figure 1-8 Check Setup Information
STEP 9: Click on “Finish”, as shown in Figure 1-9, to finish installation. This completes the
program installation.
Figure 1-9 Finish the Installation
Management & Control Software User’s Manual
- – 1-9
1.3 First Start up
After installation, one of the IE settings needs to be changed before you can start running the
Monitor program. Enable the mechanism for submitting non-encrypted data in the path
“Start->Settings->control Panel->Internet Options->Security->Custom Level…\Setting:”. You
can also find the path from the IE browser, as it is depicted in the following. You can follow the
instructions to complete this setting, as shown in Figure 1-10.
Figure 1-10 Enable Submitting Non-encrypted Form Data
Upon completion of the settings, you can start to invoke the Monitor program.
1
2
3
4
5
6
Otros manuales para Net-Vision HNC700PT
3
Tabla de contenidos
Manuales populares de Software de otras marcas
PS Audio
PS Audio PowerPlay Manual del propietario
Brady
Brady LOCKOUT PRO 3.0 Manual de servicio
Avaya
Avaya Interaction Center Manual de usuario
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manual
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario
Oracle
Oracle Application 9i Manual de usuario
Acer
Acer RDM Manual de usuario
Canon
Canon Vixia HF21 Manual de usuario
Canon
Canon ZR950 Manual de usuario
Samsung
Samsung Auto Backup Manual de usuario
Polycom
Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manual de usuario