Harbor Breeze 35086 Manual de usuario

ITEM #0552025

MODEL #35086

CEILING FAN

Questions, problems, missing parts? Before returning to your retailer, call our

customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Français p. 14

PACKAGE CONTENTS

PART DESCRIPTION QUANTITY

BHanging Bracket 1

Washer 2

Mounting Screw 2

Down Rod 1

Hair Pin 1

Clevis Pin 1

Canopy 1

Canopy Hole Cover 1

Blade Bracket 5

Motor Assembly 1

Fan Blade 5

Blade Washer 15

Blade Screw 15

Blade Balancing Kit 1

Motor Coupling Cover 1

Lowes.com/harborbreeze

PZAA BB

PACKAGE CONTENTS

SAFETY INFORMATION

PART DESCRIPTION QUANTITY

Glass Mounting Ring 1

Receiver 1

Remote 1

Reverse Switch 1

Set Screw 2

Shoulder Screw 2

Glass Shade 1

50 Watt E11 Bulb 2

Light Assembly Screw 3

Light Assembly 1

Glass Mounting Ring Screw 3

Wire Connector 6

Spring Washer 1

Lag Screw 1

Lag Washer 1

Blade Bracket Screw 10

Lowes.com/harborbreeze

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

WARNING:

• Important: When using an existing outlet box, be sure the box is securely attached to the building

structure and can support the full weight of the fan. Failure to do so can result in serious injury or

death.

• Turn off circuit breakers and wall switch to the fan supply wire leads. Warning: Failure to

disconnect power supply prior to installation may result in serious injury or death.

• Do not install fan on a ceiling with a pitch greater than 20°.

• Installation work and electrical wiring must be done by qualified person(s) in accordance with all

applicable codes and standards (ANSI/NFPA 70-1999). If you are unfamiliar with the wiring

codes, contact a qualified electrician.

• Important: Be sure wiring box is properly grounded or that a ground (green) wire is present.

• Make sure the installation site you choose allows a minimum of 7 feet from the floor to the end of

the blades

PREPARATION

1. Secure the hanger bracket (A) to the ceiling outlet

box using mounting screws (C) and washers (B)

provided with the outlet box. Important: If attaching

the fan to a sloped ceiling, make sure open end of

mounting bracket is installed facing the roof. Do not

install fan on a ceiling with a pitch greater than 20°.

Lowes.com/harborbreeze

A B C

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list and diagram. If any part is missing or damaged, do not attempt to assemble the product.

Contact customer service for replacement parts.

Estimated assembly time: 30 minutes to 1 hour.

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, ladder, safety glasses, silicone caulk, caulking gun.

ASSEMBLY INSTRUCTIONS

• WARNING-To reduce risk of fire, electric shock, or personal injury, mount to outlet box marked

“Acceptable for Fan Support of 15.9kg (35lbs) or less” and use mounting screws provided with the

outlet box and/or support directly from building structure. Most outlet boxes commonly used for

the support of luminaries are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

• Warning-Risk of fire, electric shock, or personal injury. Ceiling fans may be either directly

supported from a structural framing member of a building and (see examples in figures A & B) or

may be mounted to an outlet box marked acceptable for fan support of 31.8 kg (70 lbs) to 15.9kg

(35 lbs) (see example in figure C).

ASSEMBLY INSTRUCTIONS

2. Remove the hairpin (E) clip and clevis pin (F) from the downrod support of the motor assembly (J)

and loosen the two set screws (T). Slide the downrod (D) through the canopy (G), canopy hole

cover (H) and motor coupling cover (O). Feed the black, white and blue wires with safety cable

from fan through the downrod (D). Insert the downrod into motor assembly (J) Secure clevis pin

(F) with hairpin (E) clip and tighten setscrews (T).

3. Loosen the two shoulder screws (U) without fully

removing in the hanger bracket (A). Carefully lift the

fan and seat the downrod (D)/hanger ball assembly

on the hanger bracket (A) that was just attached to

the outlet box. Be sure the groove in the ball is lined

up with the tab on the hanger bracket (A).

Lowes.com/harborbreeze

ASSEMBLY INSTRUCTIONS

5. The frequency switches on your receiver and

transmitter have been preset at the factory. Remove

the transmitter battery cover and make sure the

switches are set to the same position. This must be

done so that your fan will communicate properly. If

you are using more than one fan in the same area

and want to control them separately, change one

fan’s dip switch settings in the transmitter and

remote to a new pattern.

NOTE: If not using for long periods of time, remove

battery to prevent damage to transmitter. Store the

remote away from excessive heat or humidly.

4. For Canadian installation and for USA fans over 35

lbs, the safety cable must be installed into the house

structure beams using a 3” lag screw (CC). Make

sure that when the safety cable is fully extended the

lead wires are longer than the cable and no stress is

placed on the lead.

Lowes.com/harborbreeze

Safety

Cable

Safety

Cable

Safety

Cable

ASSEMBLY INSTRUCTIONS

6. Wiring the fan per wiring diagram and Securely connect wires with wire connectors (AA):

• Connect WHITE fan motor wire to WHITE receiver unit wire marked TO MOTOR N.

• Connect BLUE fan motor wire to BLUE receiver unit wire marked FOR LIGHT.

• Connect BLACK fan motor wire to BLACK receiver unit wire marked TO MOTOR L.

• Connect BLACK supply wire to BLACK receiver unit wire marked AC IN L.

• Connect WHITE supply wire to WHITE receiver unit wire marked AC IN N.

• Connect GROUND (GREEN) wires from hanger bracket and downrod ball, to GROUND (GREEN

or BARE COPPER) from house.

Lowes.com/harborbreeze

ASSEMBLY INSTRUCTIONS

7. Once wiring step has been completed, slide the

wired remote receiver in between the bracket (A)

and the top of the downrod ball (D) with the flat side

of the receiver facing the ceiling. Turn lead wires

upward and carefully push them into the outlet box,

with the white and green wires to one side of the box

and the black wire toward the other side.

8. Loosen the two shoulder screws (U) without fully removing the hanger bracket (A). Assemble

canopy (G) by rotating keyhole slot in canopy over shoulder screws (U) in hanger bracket (A).

Tighten shoulder screws (U). Securely attach and tighten the canopy hole cover (H) over the

shoulder screws (U) in the hanger bracket (A) utilizing the keyhole slot twist-lock feature.

Lowes.com/harborbreeze

ASSEMBLY INSTRUCTIONS

9. Attach blade brackets (I) to blades (K) with screws

(M) and metal or fiber washers (L). Do not tighten

screws (M) until each screw (M) has been started.

Then, tighten each screw (M) starting with the center

screw.

10.Screw the glass mounting ring (P) onto the motor

assembly (J) with the glass mounting screws (Z).

Lowes.com/harborbreeze

EE I

ASSEMBLY INSTRUCTIONS

12.Insert 50 watt. E11 bulbs (W) into the sockets found on the light assembly (Y). Screw glass shade

(V) onto the glass mounting ring (P).

Lowes.com/harborbreeze

11.Attach electric wires from motor assembly (J) to the

electrical wires on the light assembly (Y). Attach the

light assembly (Y) to the motor assembly (J) using

the light assembly screws (X).

Tabla de contenidos

Idiomas:

Otros manuales de Admirador de Harbor Breeze

Harbor Breeze

Harbor Breeze BELLHAVEN II E-BLHII52VPW5C4S Manual de usuario

Harbor Breeze

Harbor Breeze BTH44ABZC5C Manual de usuario

Harbor Breeze

Harbor Breeze POINT BREAK Hoja de instrucciones

Harbor Breeze

Harbor Breeze AR09-52WHT Manual de usuario

Harbor Breeze

Harbor Breeze TOWNSEND LP8018LAZ Manual de usuario

Harbor Breeze

Harbor Breeze PORTES LP8293LAZ Manual de usuario

Harbor Breeze

Harbor Breeze ANIVA BAY Manual de usuario

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Manual de usuario

Harbor Breeze

Harbor Breeze CANTLEY 41557 Manual de usuario

Harbor Breeze

Harbor Breeze TILGHMAN Manual de usuario

Harbor Breeze

Harbor Breeze BARNSTAPLE BAY E-RLG52NWZ5C Manual de usuario

Harbor Breeze

Harbor Breeze 42612 Manual de usuario

Harbor Breeze

Harbor Breeze BEACH CREEK TG44LW3D1RC Manual de usuario

Harbor Breeze

Harbor Breeze 872 Manual de usuario

Harbor Breeze

Harbor Breeze 40662 Manual de usuario

Harbor Breeze

Harbor Breeze PRESTWICK 42868 Manual de usuario

Harbor Breeze

Harbor Breeze E-BDB52LABZ5BC4N Manual de usuario

Harbor Breeze

Harbor Breeze E-TM52BNK5LED Manual de usuario

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Manual de usuario

Harbor Breeze

Harbor Breeze 40945 Manual de usuario

Harbor Breeze

Harbor Breeze BOD52MW3 Manual de usuario

Harbor Breeze

Harbor Breeze AERO CEILING FAN E-AER52BRZ5LKRCI Manual de usuario

Harbor Breeze

Harbor Breeze RLG52NWZ5C3L Manual

Harbor Breeze

Harbor Breeze 42079 Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje