Harbor Breeze Cape Coast E-YLM52WW5C1 Manual de usuario

CAPE COAST CEILING FAN

Harbor Breeze® is a registered trademark

ITEM #0593743

MODEL #E-YLM52WW5C1

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. -

5 p.m., EST, Friday.

ATTACH YOUR RECEIPT HERE

Serial Number Purchase Date

Español p. 20

Lowes.com/harborbreeze

E206035

LISTED

For

Wet Location

EB15417

READ AND SAVE THESE INSTRUCTIONS

Please read and understand this entire manual before attempting to assemble, install or operate the

product.

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage that

might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to the

floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan including the light kit is: 18.74 lbs.

Safety Information ................................................................................................................2

Package Contents ................................................................................................................4

Hardware Contents

...........................................................................................................................

Preparation

...........................................................................................................................

Initial Installation ...................................................................................................................6

Wiring ..................................................................................................................................10

Final Installation .................................................................................................................

Operating Instructions ......................................................................................................15

Care and Maintenance .......................................................................................................17

Troubleshooting..................................................................................................................17

Warranty .............................................................................................................................18

Replacement Parts List ......................................................................................................19

TABLE OF CONTENTS

Lowes.com/harborbreeze

SAFETY INFORMATION

DANGER

If using this fan in a WET or DAMP location, this fan must be connected to a supply circuit that is

protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury,

electrical shock or death.

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. (15.9 KG) OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed

control device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before installation, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

3Lowes.com/harborbreeze

DANGER

CAUTION

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure they are secure.

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

Downrod 1

Canopy

Mounting Bracket

D Motor Housing 1

Yoke Cover 1

F Light Kit Fitter 1

Blade

Blade Arm

I Glass Shade 1

J Motor Screw 10

(preassembled)

K Canopy Mounting Screw 2

(preassembled)

L Pin (preassembled) 1

M Clip (preassembled) 1

DESCRIPTIONPART QUANTITY

PACKAGE CONTENTS

4Lowes.com/harborbreeze

DESCRIPTIONPART QUANTITY

N Hanging Ball Cover 1

O Hex Nut (preassembled) 1

P Lock Washer (preassembled) 1

Q Bulb 2

R Motor Washer 10

(preassembled)

S Switch Housing Screw 3

(preassembled)

T Blade Arm Screw Post 15

(preassembled)

U Switch Housing Cap 1

(preassembled)

V Switch Housing Cap Screw 1

(preassembled)

W Canopy Cover 1

X Balancing Kit 1

PREPARATION

Lowes.com/harborbreeze

HARDWARE CONTENTS (shown actual size)

*US Pat. Pending

E3 Wire

Connector

Qty. 4

AA BB

Three-C

Clip*

Qty. 15

+ 1 extra

Pull Chain

Extension

Qty. 2

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on

foam to avoid damage to ﬁnish. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to install, operate or assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters

Turn off circuit breakers or fuse and wall switch to

the fan supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

Check to make sure blades (G) will be at least

30 inches from any obstruction. Check downrod

(A) length to ensure blades (G) will be at least 7 ft.

above the floor.

INITIAL INSTALLATION

OFF

Lowes.com/harborbreeze

2. Determine mounting method to use.

A. Standard mount

B. Angle mount

Note: Flushmount and closemount options are not

available for this fan.

IMPORTANT: If using the angle mount, ensure the

ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. high or higher. For taller

ceilings you may want to use a longer downrod

(not included). Angle-style mounting is best suited

for angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance.

7 ft.

min.

30 in.

min.

19° max.

INITIAL INSTALLATION

Lowes.com/harborbreeze

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE: It is very important you use the proper

hardware when installing the mounting bracket

IMPORTANT: If using the angle mount, make

sure open end of mounting bracket (C) is installed

facing the higher point of the ceiling, and ensure

the ceiling angle is not steeper than 19°.

5. Remove preassembled motor screws (J) and

motor washers (R) from underside of motor

housing (D).

Note: Make sure to keep loose hardware

separate to avoid confusion during installation.

Open End

ANGLE MOUNTSTANDARD MOUNT

Remove pin (L) and clip (M) from downrod (A).

Partially loosen preassembled set screws and nuts

in yoke at top of motor housing (D).

6. 6A

Set Screw

Sideview

Yoke

Lowes.com/harborbreeze

Depending on the length of downrod you use,

you may need to cut the lead wires back to

simplify the wiring. If you decide to cut back the

lead wires, it is suggested you do so in the

following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod. Start at the TOP of the hanging ball on

the downrod and measure 8 in. of lead wire, and

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 9 and 10 are not necessary and you

may proceed to Step 11 instead.

INITIAL INSTALLATION

Slip downrod (A) into motor housing yoke, align

holes and re-install pin (L) and clip (M). Tighten

set screws in motor housing yoke and then

tighten preassembled nuts on the set screws.

Then, slide yoke cover (E) down until it rests on

top of motor housing (D).

Hanging

Ball

8 in.

Yoke

Set Screw

and Nut

Sideview

7. Insert downrod (A) through canopy (B), canopy

cover (W) and yoke cover (E). NOTE: Canopy

cover (W) must be turned with the shiny side

toward the motor housing (D).

Then, thread wires from motor housing (D)

through downrod (A).

11.

Install hanging ball of downrod (A) into opening of

mounting bracket (C). Align one of the slots in

hanging ball with tab in mounting bracket (C).

DANGER: Failure to align one of the slots in

the ball with the tab may result in serious injury or

death.

12.

Lowes.com/harborbreeze

If you decided to cut back the lead wires in Step 9,

strip 1/2 in. of insulation from end of each

wire -- white, black, green and blue (if applicable).

Twist stripped ends of each strand of wire within

the insulation with pliers (not included).

10. 10

INITIAL INSTALLATION

Thread each of the wires through a different hole

in the hanging ball cover (N). Pull hanging ball

cover (N) down securely over hanging ball on

downrod (A).

Hanging

Ball Slot

Tab

DANGER: If using this fan in a WET or DAMP location, this fan must be connected to a supply

circuit that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal

injury, electrical shock or death.

10 Lowes.com/harborbreeze

WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors

provided with this fan are designed to accept only one 12-gauge house wire and two lead wires

from the fan. If your house wire is larger than 12-gauge or there is more than one house wire to

connect to the corresponding fan lead wires, consult an electrician for the proper size wire

connectors to use.

CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is

present.

WARNING: If house wires are different colors than referred to in the following steps, stop

immediately. A professional electrician is recommended to determine wiring.

Choose wiring diagram (Fig. 1A, Fig. 1B or Fig. 1C)

that fits your situation and make appropriate wiring

connections as follows: [IMPORTANT: Use one of the

wire connectors (AA) provided to make each wire

connection, making sure to screw wire connector (AA)

on in a clockwise direction.]

1a. FAN AND LIGHT CONTROLLED BY PULL

CHAINS: Connect BLACK and BLUE wire from fan

to BLACK wire from ceiling. Connect WHITE wire

from fan to WHITE wire from ceiling. Connect

GROUND (GREEN) wires from (downrod (A) and

mounting bracket (C) to BARE/GREEN wire from

ceiling.

WARNING: Using a full range dimmer switch (not included) to control fan speed will cause a

loud humming noise from fan. To reduce the risk of fire or electrical shock, do NOT use a full

range dimmer switch to control fan speed.

WIRING

NOTE: This fan is remote control adaptable (remote control not included). Any remote control used

with this fan MUST be UL-approved for WET LOCATIONS. Please refer to instructions provided

with the remote control before proceeding with these wiring instructions.

FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES

FAN AND LIGHT CONTROLLED BY PULL CHAINS

BLACK(POWER)

WHITE(NEUTRAL)

BLACK

GROUND/GREEN (BARE)

WHITE BLUE &

BLACK

120V POWER

FROM CEILING

GREEN

Tabla de contenidos

Idiomas:

Otros manuales de Admirador de Harbor Breeze

Harbor Breeze

Harbor Breeze 856 Manual de usuario

Harbor Breeze

Harbor Breeze LP8071LBN Manual de usuario

Harbor Breeze

Harbor Breeze FREEPORT LP8079LAZ Manual de usuario

Harbor Breeze

Harbor Breeze 35062 Manual de usuario

Harbor Breeze

Harbor Breeze BTH44ABZC5C Manual de usuario

Harbor Breeze

Harbor Breeze FWH60BNK3LRS Manual de usuario

Harbor Breeze

Harbor Breeze BDB52BNK5L Manual de usuario

Harbor Breeze

Harbor Breeze 872 Manual de usuario

Harbor Breeze

Harbor Breeze MERRIMACK II 41125 Manual de usuario

Harbor Breeze

Harbor Breeze 40107 Manual de usuario

Harbor Breeze

Harbor Breeze LANDON LAN52SS5L Manual de usuario

Harbor Breeze

Harbor Breeze E-CAF56OSB5CRC Manual de usuario

Harbor Breeze

Harbor Breeze CLASSIC STYLE BDB52LW5N Manual de usuario

Harbor Breeze

Harbor Breeze TILGHMAN Manual de usuario

Harbor Breeze

Harbor Breeze L1901 Manual de usuario

Harbor Breeze

Harbor Breeze FAIRWIND Manual de usuario

Harbor Breeze

Harbor Breeze GAT24MBK6LOD Manual de usuario

Harbor Breeze

Harbor Breeze BRISTLE AR13-44BLK AR13-44BN Manual de usuario

Harbor Breeze

Harbor Breeze OCEANSIDE Manual de usuario

Harbor Breeze

Harbor Breeze ECHOLAKE 42080 Manual de usuario

Harbor Breeze

Harbor Breeze LP8115LAZ Manual de usuario

Harbor Breeze

Harbor Breeze CGR60WW3LR Manual de usuario

Harbor Breeze

Harbor Breeze 41169 Manual de usuario

Harbor Breeze

Harbor Breeze ARMORY 40087 Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje