Harbor Breeze WCK52NWZ5D Manual de usuario

CANE BAY CEILING FAN

For

Damp Location

Harbor Breeze® is a registered trademark

ITEM #0883805

Questions, problems, missing parts? Before returning to your retailer, call our customer

service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday,

8 a.m. - 5 p.m., EST, Friday.

ATTACH YOUR RECEIPT HERE

Purchase Date

PH18453 1

Español p. 19

MODEL #WCK52NWZ5D

READ AND SAVE THESE INSTRUCTIONS

Safety Information .........................................................................................................

... 2

Package Contents ...........................................................................................................

... 4

Hardware Contents

...............................................................................................................

..........

Preparation .....................................................................................................................

....

Initial Installation .................................................................................................................

Downrod-Style Fan Mounting ......................................................................................

.....

. 7

Closemount-Style Fan Mounting ..................................................................................

..... 9

Wiring ...........................................................................................................................

. 11

Final Installation ..............................................................................................................

Operating Instructions ...................................................................................................

... 15

Care and Maintenance ..............................................................................................

........ 16

Troubleshooting................................................................................................................... 17

Warranty ......................................................................................................................

...... 18

Replacement Parts List ......................................................................................................

TABLE OF CONTENTS

SAFETY INFORMATION

• Do not discard fan carton or foam inserts. Should this fan need to be returned to the factory for

repairs, it must be shipped in its original packaging to ensure proper protection against damage

that might exceed the initial cause for return.

• Make sure all electrical connections comply with local codes, ordinances, the National Electrical

Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself wiring

handbook if you are unfamiliar with installing electrical wiring.

• Make sure the installation site you choose allows a minimum clearance of 7 ft. from the blades to

the floor and at least 30 in. from the end of the blades to any obstruction.

• After you install the fan, make sure all connections are secure to prevent the fan from falling.

• The net weight of this fan is: 18.51 lbs.

SAFETY INFORMATION

To reduce the risk of fire, electrical shock or personal injury, mount fan to outlet box

marked "ACCEPTABLE FOR FAN SUPPORT OF 35 LBS. OR LESS" and use

mounting screws provided with the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may need to be replaced.

Consult a qualified electrician if in doubt.

When mounting fan to a ceiling outlet box, use a METAL octagonal outlet box; do NOT use a

plastic outlet box. Secure the outlet box directly to the building structure. The outlet box and its

support must be able to support the moving weight of the fan (at least 35 lbs.).

To avoid personal injury, the use of gloves may be necessary while handling fan parts with

sharp edges.

To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan

are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your

house wire is larger than 12-gauge or there is more than one house wire to connect to the

corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.

To reduce the risk of fire or electrical shock, do not use the fan with any solid state speed control

device or control fan speed with a full range dimmer switch.

To reduce the risk of fire, electrical shock or personal injury, do not bend the blade arms when

installing them, balancing the blades or cleaning the fan. Do not insert objects between the

rotating fan blades.

To reduce the risk of personal injury, use only parts provided with this fan. The use of parts

OTHER than those provided with this fan will void the warranty.

Before proceeding, be sure to shut off electricity at main switch or circuit breaker in order to avoid

electrical shock.

WARNING

Be sure outlet box is properly grounded and that a ground wire (green or bare) is present.

Before beginning installation, carefully check all screws, bolts and nuts on fan motor assembly to

ensure that they are secured.

CAUTION

DANGER

When using an existing outlet box, make sure the outlet box is securely attached to the building

structure and can support the full weight of the fan. Failure to do this can result in serious injury or

death. The stability of the outlet box is essential in minimizing wobble and noise in the fan after

installation is complete.

IMPORTANT REMINDER: You must use the

parts provided with this fan for proper installation

and safety.

Downrod 1

Canopy

Mounting Bracket

(preassembled)

D Motor Housing 1

(preassembled)

Yoke Cover 1

F Switch Housing 1

DESCRIPTIONPART QUANTITY

Blade

Blade Arm

I Motor Screw 10

(preassembled)

J Pull Chain Extension 1

K Canopy Mounting Screw 4

(preassembled)

L Pin (preassembled) 1

M Clip (preassembled) 1

DESCRIPTIONPART QUANTITY

PACKAGE CONTENTS

PREPARATION

Wire

Connector

Qty. 4

AA BB

HARDWARE CONTENTS (shown actual size)

Blade

Screw

Qty. 15

+ 1 extra

Rubber

Blade

Washer

Qty. 15

+ 1 extra

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on

foam to avoid damage to ﬁnish. Compare parts with package contents list and hardware contents list.

If any part is missing or damaged, do not attempt to install, operate or assemble the product.

Estimated Assembly Time: 120 minutes

Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety

Glasses, Stepladder and Wire Strippers

Helpful Tools (not included): AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and

Wire Cutters

Turn off circuit breakers and wall switch to the fan

supply line leads.

DANGER: Failure to disconnect power supply

prior to installation may result in serious injury or

death.

INITIAL INSTALLATION

OFF

Check to make sure blades (G) will be at least 30

inches from any obstruction and at least 7 ft. above

the floor.

INITIAL INSTALLATION

7 ft.

min.

30 in.

min.

2. Determine mounting method to use.

A. Downrod mount (standard or angled ceiling)

B. Closemount (standard ceiling only)

IMPORTANT:If using the angle mount, check to

make sure the ceiling angle is not steeper than 19°.

*Helpful Hint: Downrod-style mounting is best

suited for ceilings 8 ft. or higher. For taller ceilings

you may want to use a longer downrod (not

included). Angle-style mounting is best suited for

angled or vaulted ceilings. A longer downrod is

sometimes necessary to ensure proper blade

clearance. B

4a.Loosen canopy mounting screws (K) in slotted

holes in canopy (B) and remove the other two

canopy mounting screws (K) -- save canopy

mounting screws (K) for later use. Remove

mounting bracket (C) from canopy (B).

INITIAL INSTALLATION

5. Remove motor screws (I) from underside of

motor and save for blade arm (H) attachment

later on. If there are plastic motor blocks

installed with the motor screws (J), discard the

plastic motor blocks.

For DOWNROD-STYLE FAN MOUNTING,

proceed to step 1 on the next page.

For CLOSEMOUNT-STYLE FAN MOUNTING,

skip to page 9.

Secure mounting bracket (C) to outlet box (not

included) using screws, spring washers and flat

washers provided with the outlet box.

*NOTE:It is very important you use the proper

hardware when installing the mounting bracket (C)

as this will support the fan.

IMPORTANT: If using angle mount, make sure

open end of mounting bracket (C) is installed

facing the higher point of the ceiling.

4b.

4b ANGLE

MOUNT

STANDARD

MOUNT

Plastic Motor

Block

DOWNROD-STYLE FAN MOUNTING

Remove pin (L) and clip (M) from downrod (A).

Partially loosen preassembled set screws and

nuts in yoke at top of motor housing (D).

Set

Screws

and Nuts

1a. 1a

1b.

Yoke

Sideview

Set Screw

& Nut

DOWNROD-STYLE FAN MOUNTING

2. Insert downrod (A) through canopy (B) and yoke

cover (E). Thread wires from motor housing (D) up

through downrod (A). 2

Slip downrod (A) into yoke, align holes and

re-install pin (L) and clip (M). Tighten set screws

and then tighten nuts on the set screws. Slide yoke

cover (E) down until it rests on top of motor

housing (D).

Set

Screws

and Nuts

4. Depending on the length of downrod you use, you

may need to cut the lead wires back to simplify the

wiring. If you decide to cut back the lead wires, it is

suggested you do so in the following manner:

Take the lead wires and make sure you have

pulled them all the way through the top of the

downrod (A). Start at the TOP of the hanging ball

on the downrod (A) and measure 8 in. of lead wire,

then cut the excess wire off with wire cutters (not

included).

NOTE: If you do not cut back the lead wires,

Steps 4 and 5 are not necessary and you may

proceed to Step 6 instead.

Hanging

Ball

8 in.

DOWNROD-STYLE FAN MOUNTING

5. 5

If you decided to cut back the lead wires in Step 4,

strip 1/2 in. of insulation from end of each wire --

white, black, green and blue (if applicable). Twist

stripped ends of each strand of wire within the

insulation with pliers (not included).

6. Install hanging ball of downrod (A) into opening of

mounting bracket (C). Align one of the slots in

hanging ball with tab in mounting bracket (C).

DANGER: Failure to align one of the slots in

the ball with the tab may result in serious injury or

death.

Continue to WIRING on page 11.

Slot

Tab

Hanging

Ball

CLOSEMOUNT-STYLE FAN MOUNTING

Remove canopy cover from bottom of canopy (B).

NOTE: It may be necessary to use the handle end of

a screwdriver (not included) to remove the canopy

cover by tapping on the canopy cover from the

inside of the canopy (B).

NOTE: Downrod (A), yoke cover (E) and canopy

cover are not used in this type of installation.

1. 1

Canopy

Cover

CLOSEMOUNT-STYLE FAN MOUNTING

Temporarily hang fan on the tab on the mounting

bracket (C) using one of the non-slotted holes in

the canopy (B).

Tab

3. Pull wires up through hole in the middle of the

canopy (B) and attach canopy (B) to motor

housing (D) using the three screws previously

removed.

Remove every other preassembled screw from top

of motor housing (D).

2. 2

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Admirador de Harbor Breeze

Harbor Breeze

Harbor Breeze CENTREVILLE 40117 Manual de usuario

Harbor Breeze

Harbor Breeze Bath Ventilator with Light Manual de usuario

Harbor Breeze

Harbor Breeze 40093 Manual de usuario

Harbor Breeze

Harbor Breeze CUMBERLAND 42476 Manual de usuario

Harbor Breeze

Harbor Breeze 40101 Manual de usuario

Harbor Breeze

Harbor Breeze 35062 Manual de usuario

Harbor Breeze

Harbor Breeze 52 IN CLASSIC STYLE 40081 Manual de usuario

Harbor Breeze

Harbor Breeze QUIMBY LP8078LAZ Manual de usuario

Harbor Breeze

Harbor Breeze 00878 Manual de usuario

Harbor Breeze

Harbor Breeze URBANIA E-AR54BNK5C1 Manual de usuario

Harbor Breeze

Harbor Breeze MAZON MZ44BNK3LR Manual de usuario

Harbor Breeze

Harbor Breeze PLM52CB5D Manual de usuario

Harbor Breeze

Harbor Breeze E-BDB52ABZC5BC4N Manual de usuario

Harbor Breeze

Harbor Breeze QUONTA CFH52BNK5L Manual de usuario

Harbor Breeze

Harbor Breeze 0184428 Manual de usuario

Harbor Breeze

Harbor Breeze RLG52NWZ5L Manual de usuario

Harbor Breeze

Harbor Breeze 40945 Manual de usuario

Harbor Breeze

Harbor Breeze LAKE LAGODA LP8300LAZ Manual de usuario

Harbor Breeze

Harbor Breeze L1901 Manual de usuario

Harbor Breeze

Harbor Breeze 40107 Manual de usuario

Harbor Breeze

Harbor Breeze TILGHMAN Manual de usuario

Harbor Breeze

Harbor Breeze FWH60BNK3LRS Manual de usuario

Harbor Breeze

Harbor Breeze JP18EB3 Manual de usuario

Harbor Breeze

Harbor Breeze SOUTH RIVER C-ST52BNK5D1 Manual de usuario

Manuales populares de Admirador de otras marcas

ELTA FANS

ELTA FANS H03VV-F Manual de usuario

Hunter

Hunter 20714 Manual de instrucciones

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manual de usuario

Hunter

Hunter Caraway Manual de instrucciones

Panasonic

Panasonic FV-15NLFS1 Manual de usuario

Kompernass

Kompernass KH 1150 Manual de usuario

VES

VES FALA100/12V/TR Manual de usuario

Vertiv

Vertiv Liebert DCD Manual de usuario

Westinghouse

Westinghouse GFP Series Manual de usuario

Venmar

Venmar KUBIX HRV PLUS Series Manual de usuario

Maico

Maico ECR 31 Manual de usuario

Sonnenkonig

Sonnenkonig Dinky Manual de usuario

S&P

S&P ECOWATT HXBR Manual de usuario

Wider

Wider IMP03369BH Manual de usuario

Panasonic

Panasonic F-60DHN Manual de usuario

Hinkley

Hinkley HIGHLAND Manual de usuario

Broan

Broan 766BN Manual de usuario

Premium

Premium PFS16022 Instrucciones de montaje