Hans Grohe AlFie Aquasaur Manual de usuario

The Fun Handshower

REPLACING EXISTING SHOWERHEAD WITH ALFIE

Enclosed you will find complete

instructions for installing Alfie

the Aquasaur, a brightly colored

handshower that makes showering fun.

Designed for the young at heart, Alfie

features two spraymodes and unique

self-cleaning whiskers.

Alfie the Aquasaur is just one of a full

range of Hansgrohe products for bath

and kitchen. Each product has been

carefully designed to be safe, reliable,

and easy to use.

If you would like to receive further

information on Hansgrohe, please call

us at 800 334 0455.

• Unscrew existing showerhead from shower

arm.

• Clean threads on shower arm with steel

wool and wrap the threads with TeflonTM

tape.

• Place a hose washer in the shorter of the two

hose end connectors on the Techniflex hose.

Screw this end of the hose to the shower

arm. If wrench tightening is necessary, use

a cloth to protect the finish.

• Place a second hose washer in the longer

hose end connector. Attach this end to Alfie

and hand tighten.

• Support Alfie with a stationary handshower

support (28321000), or an angle-adjustable

Porter’E handshower support (27504000).

• Note: see instructions provided with

individual products for additional installation

guidelines.

• Note: Hansgrohe recommends the use

of external vacuum breaker (06510000)

between the shower arm and Techniflex

hose.

ADDING ALFIE TO AN EXISTING SHOWERHEAD

WITH INVERSA DIVERTER

• Remove existing showerhead from the

shower arm. If it is necessary to use a

wrench, protect the showerhead and shower

arm connector with a cloth.

• Clean the shower arm threads with steel

wool and wrap with TeflonTM tape.

• Attach Inversa Diverter (28719000) to

shower arm. Wrench tighten, using a cloth

to protect the finish. Wrap both outlets of

the Inversa with TeflonTM tape.

• Reattach the showerhead to the front outlet

of the Inversa diverter and wrench tighten.

• Place a hose washer in the shorter hose

end connector. Screw the shorter hose end

connection to the side outlet port of the

Inversa.

• Place a hose washer in the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Use handshower support (28321000) to

support Alfie.

THE FOLLOWING

INSTALLATION OPTIONS RE-

QUIRE IN-WALL

PLUMBING

INSTALLATION BY A

PROFESSIONAL PLUMBER IS

REQUIRED.

90743105 03/2008

Please note: in Massachusetts, the

maximum output water temperature can

be no higher than 112°F.

EPLACING EXISTING SHOWERHEAD AND ARM

WITH ALFIE AND WALL OUTLET

• Remove existing showerhead and shower

arm.

• Obtain a ½” male threaded brass nipple.

The nipple should be long enough so that

it extends 5/8” outside the surface of the

finished wall. Wrap both ends of the nipple

with TeflonTM tape and install.

• Attach wall outlet (27458001) to the

exposed nipple. Wrap the exposed male

end of the wall outlet with TeflonTM tape.

• Place a hose washer in the shorter hose

end connector. Attach the short hose end

connector to the wall outlet. If wrench

tightening is necessary, protect the finish

with a cloth.

• Place a hose washer in the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Support Alfie with a stationary handshower

support (28321000) or an angle-adjustable

Porter’E handshower support (27504000).

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by aprOfEssiONal plumbEr.

MOUNTING ALFIE ON A WALLBAR WITH WALL

OUTLET

• Remove existing showerhead and

shower arm.

• Obtain a ½” male threaded brass

nipple. The nipple should be long

enough so that it extends 5/8” outside

the surface of the finished wall. Wrap

both ends of the nipple with TeflonTM

tape and install.

• Install wall outlet (27458001) to the

nipple.

• Install wallbar Unica’B (27702000)

or Unica’S (27712000) at the desired

height.

• Wrap the wall outlet nipple with

TeflonTM tape. Place a hose washer in

the shorter hose end connector. Screw

this end to the wall outlet. Place a

hose washer in the longer hose end

connector. Attach this end to Alfie and

hand tighten..

• Sit Alfie in the holder on the wallbar.

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by aprOfEssiONal plumbEr.

existing handshower, snap-on connector

(28346000) can be specified.

NOTE: Disconnect the Alfie handshower

from the hose by depressing the button.

Handshowers with the snap-on connector

are not recommended for use by children,

who may accidentally disconnect the

handshower while in use.

REPLACING EXISTING SHOWERHEAD AND ARM

WITH ALFIE AND PORTER’E HANDSHOWER SUPPORT

AND HOSE

• Remove existing showerhead and shower

arm.

• Obtain a ½” male threaded brass nipple.

The nipple should be long enough so that

it extends 5/8” outside the surface of the

finished wall. Wrap both ends of the nipple

with TeflonTM tape and install.

• Install the Porter’E with outlet (27508001)

mounting piece according to the installation

instructions included with it. Install the

cover. Wrap the outlet threads with TeflonTM

tape.

• Place a hose washer to the shorter hose end

connector Attach this end to the Porter’E.

Wrench tighten if desired, but use a cloth

to protect the finish on the hose and on the

Porter’E.

• Place a hose washer to the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Sit Alfie in the holder.

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by aprOfEssiONal plumbEr.

SNAP-ON CONNECTOR SET 28346000

If Alfie is to be used as an accessory to an

Este manual sirve para los siguientes modelos

Otros manuales de Producto de plomería de Hans Grohe

Hans Grohe

Hans Grohe Starck 10020XX Guía

Hans Grohe

Hans Grohe AXOR Starck 10754180 Manual de usuario

Hans Grohe

Hans Grohe AXOR Starck 10932000 Manual

Hans Grohe

Hans Grohe AXOR Citterio Select 39860 Series Manual

Hans Grohe

Hans Grohe MySelect S 1jet Set 65 26711400 Manual

Hans Grohe

Hans Grohe Ecostat Comfort 13114 Series Manual

Hans Grohe

Hans Grohe Raindance Showerpipe 27165-1 Series Manual de instrucciones

Hans Grohe

Hans Grohe AXOR Starck 10466000 Manual

Hans Grohe

Hans Grohe Zesis M33 150 2jet 74800 Series Manual

Hans Grohe

Hans Grohe Mondial 15750 Series Manual de usuario

Hans Grohe

Hans Grohe AXOR One 45771000 Manual

Hans Grohe

Hans Grohe Logis 71130000 Manual

Hans Grohe

Hans Grohe Talis Puro 31647000 Manual

Hans Grohe

Hans Grohe Rainmaker Select 460 2jet 24005400 Manual

Hans Grohe

Hans Grohe Monsoon Vario 26544400 Manual

Hans Grohe

Hans Grohe Axor Montreux Handshower 16320XX1 Manual de usuario

Hans Grohe

Hans Grohe Logis Fine 110 71253 1 Series Manual de instrucciones

Hans Grohe

Hans Grohe Porter'C 27521 Series Manual de usuario

Hans Grohe

Hans Grohe Tecturis E 80 CoolStart 73001 Series Manual

Hans Grohe

Hans Grohe Raindance 27167009 Manual

Hans Grohe

Hans Grohe Locarno 04813830 Manual de usuario

Hans Grohe

Hans Grohe AXOR Citterio 39135821 Manual de instrucciones

Hans Grohe

Hans Grohe Talis S Electronic Faucet 32111001 Manual de usuario

Hans Grohe

Hans Grohe S 15757 1 Series Manual de instrucciones

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

baliv

baliv WT-140 Manual de usuario

Kohler

Kohler Mira Eco Manual de operación