Hamilton Beach 840043400 Instrucciones de instalación

Use & Care for Irons

Customer Service Number

In USA: 1-800-851-8900 (8:00 AM to 5:00 PM EST)

In Canada: 1-800-267-2826

Web Site Address – http://www.hambeach.com

Keep this number for future reference!

Acetate

Silk,Acrylic

Nylon, Rayon

Polyester

Cotton Blends

Permanent Press

Wash N' Wear

Wool Blends

Ramie

Flax

1 DELICA

2 LIGHT

3 EASY CARE

4 WOOL

5 COTTON

6 LINEN

ELECTRONIC SHUT-OFF MEMORY

SPRAY, BLAST, STEAM & DRY

REFILL

FULL

•

When using your iron, basic safety precautions should always be

followed, including the following:

1. Read all instructions.

2. Use iron only for its intended purpose.

3. To protect against a risk of electric shock, do not immerse the iron,

cord, or plug in water or other liquids.

4. The iron should always be turned to OFF before plugging or

unplugging from outlet. Never yank the cord to disconnect from

outlet; instead grasp plug and pull to disconnect.

5. Do not allow cord to touch hot surfaces. Let iron cool completely

before storing and loop cord loosely around iron.

6. Always disconnect iron from electrical outlet when filling or empty-

ing water and when not in use.

7. Do not operate iron with a damaged cord or if the iron has been

dropped or damaged. To avoid the risk of electric shock, do not

disassemble the iron. Call our toll-free customer service number

for information on examination and repair. Incorrect reassembly

can cause a risk of electric shock when the iron is used.

8. Close supervision is necessary for any appliance being used by

or near children. Do not leave iron unattended while connected or

on an ironing board.

9. Burns can occur from touching hot metal parts, hot water, or

steam. Use caution when you turn a steam iron upside down, as

there may be hot water in the reservoir.

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS

CONSUMER SAFETY INFORMATION

This product is intended for household use only.

To avoid a circuit overload, do not operate another high wattage ap-

pliance on the same circuit. If an extension cord is absolutely neces-

sary, a 10 ampere cord should be used. Cords rated for less amper-

age may overheat. Care should be taken to arrange the extension

54 5

HOW TO DRY IRON

1. Push the STEAM or DRY IRON/CLEAN switch to DRY

IRON/CLEAN.

2. Turn temperature control dial to desired temperature. Allow

two minutes for iron to reach desired temperature.

1. Unplug iron. Pour 6 ounces (3/4cup) of ordinary tap water in-

to water tank opening. Plug iron into outlet.

2. Push the STEAM or DRY IRON/CLEAN switch to STEAM.

3. Turn temperature control dial to desired setting in the

steam range. Allow two minutes for the iron to reach desired

temperature.

Water

Please use ordinary tap water. If you have extremely hard water,

alternate between tap water and distilled water for use in the

iron.

HOW TO STEAM IRON

FEATURES - Not All Features On All Models

STEAM or DRY IRON/CLEAN Switch

This switch provides continuous steam

in the STEAM position. Push the switch

to change to dry ironing and to clean

the steam valve.

Spray

Push to release a fine spray of water

for difficult wrinkles in cotton or linen.

KNOW YOUR IRON

Acetate

Silk,Acrylic

Nylon, Rayon

Polyester

Cotton Blends

Permanent Press

WashN' Wear

Wool Blends

Ramie

Flax

1 DELICA

2 LIGHT

3 EASY CARE

4 WOOL

5 COTTON

6 LINEN

ELECTRONICSHUT-OFF MEMORY

SPRAY,BLAST,STEAM & DRY

REFILL

FULL

•

Temperature

Control Dial

Controls

Soleplate

Heel Rest

Fabric Guide

Water Tank

Opening

• During first use of the iron, it may appear to smoke. This

will stop and does not indicate a defect or hazard.

• Many irons spit or sputter during the first few uses with

tap water. This happens as the steam chamber becomes

conditioned. This will stop after a few uses.

• Steam vents should be cleared before first use. Prepare

iron for steam ironing, then iron over an old cloth for a

few minutes while letting iron steam.

cord so that it cannot be pulled on by children or tripped over.

This appliance is equipped with a polarized plug. This type of plug

has one blade wider than the other. The plug will fit into an electrical

outlet only one way. This is a safety feature. If you are unable to insert

the plug into the outlet, try reversing the plug. If the plug should still

fail to fit, contact an electrician to replace the obsolete outlet. Do not

attempt to defeat the safety purpose of the polarized plug.

It is a good safety practice to always unplug the iron when not in

use.

Water Window

Swivel Cord

PLEASE READ BEFORE FIRST USE

76 7

1. Turn temperature control dial to OFF. Push the STEAM or

DRY IRON/CLEAN switch to DRY IRON/CLEAN. Unplug

and let cool. The iron takes longer to cool down than it does

to heat up.

2. To empty water from iron, slowly tilt pointed end of iron

down over a sink. Water will run out of water tank opening.

3. Wrap cord loosely around iron and store iron in an upright

position. Do not store iron laying flat on soleplate.

CARING FOR YOUR IRON

FABRIC/SETTING CHART

Dry Iron

Steam Range

Setting To Iron Ironing Instructions

Acetate, Silk

Acrylic, Nylon

Polyester, Rayon

Dry iron on the wrong side of

the fabric.

For wool, use a press cloth and

steam iron on the wrong side.

4Cotton Blends

5Wool

6Cotton

7Linen

0Off

Iron on wrong side of fabric

while still damp.

For polyester, dry iron while the

fabric is still damp.

Iron cottons while still damp,

using steam and/or spray.

CARING FOR THE SOLEPLATE

Dry iron using spray if necessary.

Iron using steam or spray for

difficult wrinkles.

1. Never iron over zippers, pins, metal rivets, or snaps, as

these may scratch the soleplate.

Automatic Shutoff Light

The light comes on when the iron is plugged

in, even if the temperature control dial is

set at Off. The light indicates the iron is

plugged in.

The iron will shut off and the light will go

out one hour after it is plugged in. When

the light goes out unplug the iron and

plug back in to reset.

Reversible Cord

Some irons have a reversible cord. The cord

can be moved from one side to the other, to

accommodate right- or left-handed users.

Unplug iron. Remove screw and back cover

as shown. Move cord as desired and

replace back cover and screw.

WARNING: To prevent risk of electrical shock

unplug iron before reversing cord.

Acetate

Silk,Acrylic

Nylon,Rayon

Polyester

CottonBlends

PermanentPress

WashN' Wear

WoolBlends

Ramie

Flax

1 DELICA

2 LIGHT

3 EASY CARE

4 WOOL

5 COTTON

6 LINEN

ELECTRONICSHUT-OFFMEMORY

SPRAY,B LAST,STEAM& DRY

REFILL

FULL

Wrap & Snap Cord

When finished ironing, let the iron cool then

wrap cord and secure with the Wrap & Snap

on the plug.

Swivel Cord

For irons with a swivel cord, rotate the cord

to the desired position for ironing.

98 9

TWO YEAR LIMITED WARRANTY

Hamilton Beach/Proctor-Silex, Inc. warrants this appliance to be free from

defects in material and workmanship for a period of two (2) years from the

date of original purchase, except as noted. There is no warranty with respect

to the following, which may be supplied with this appliance: glass parts, glass

containers, cutter/strainer, nonstick soleplate and/or nonstick cooking sur-

faces. This warranty extends only to the original consumer purchaser and

does not cover damage from abuse, neglect, use for commercial purposes,

or any other use not found in the printed directions. HAMILTON

BEACH/PROCTOR-SILEX, INC. DISCLAIMS ALL RESPONSIBILITY FOR

CONSEQUENTIAL DAMAGES OR INCIDENTAL LOSSES CAUSED BY USE

OF THIS APPLIANCE. Some states, or provinces, do not allow this exclusion

or limitation of incidental or consequential losses, so the foregoing disclaimer

may not apply to you. If you have a claim under this warranty, DO NOT

RETURN THE APPLIANCE TO THE STORE! Please call our

CUSTOMER SERVICE NUMBER. (For faster service please have model,

series, and type numbers ready for operator to assist you.)

In the U.S. 1-800-851-8900

In Canada 1-800-267-2826

This warranty gives you specific legal rights, and you may also have other

legal rights which vary from state to state, or province to province.

GOT A PROBLEM?

Won’t heat

PROBLEM THINGS TO CHECK

Water is

leaking

Won’t

steam

1. Do not overfill the water tank.

2. If steam ironing, is the temperature dial in the

steam range and did the iron have enough time

to preheat?

3. If dry ironing, make sure the STEAM or DRY

IRON/CLEAN switch is in the DRY IRON/CLEAN

position.

1. Check the water level.

2. Is the STEAM or DRY IRON/CLEAN switch in the

STEAM position?

3. Has the iron had enough time to preheat?

4. Has the iron been cleaned with the self-clean

feature to clear the steam valve?

1. Is the iron plugged in and the outlet working?

Check the outlet by plugging in a lamp.

2. Is the temperature control dial turned to a fabric

setting?

3. If auto shutoff model, is the AUTOMATIC SHUT-

OFF LIGHT illuminated? If not, unplug the iron

and plug back in to reset.

Leaves

spots

1. ALWAYS empty the water tank of the iron after

using. Water left in the tank may discolor cloth-

ing and soleplate.

2. To clean occasional build-up on the soleplate, wipe with a

sudsy cloth. Do not use abrasive cleansers or metal scour-

ing pads.

3. Always store iron upright in the heel rest position.

840043400

AMILTON

EACH

ROCTOR

-S

ILEX

ROCTOR

-S

ILEX

ANADA

Washington, North Carolina 27889 Picton, Ontario KOK 2T0

7/97

Tabla de contenidos

Otros manuales de Hierro de Hamilton Beach

Hamilton Beach

Hamilton Beach HIR700-CE Manual de usuario

Hamilton Beach

Hamilton Beach 14671 Manual del propietario

Hamilton Beach

Hamilton Beach 840124300 Manual de usuario

Hamilton Beach

Hamilton Beach 14551 Manual del propietario

Hamilton Beach

Hamilton Beach 14010 Manual de usuario

Hamilton Beach

Hamilton Beach Durathon 19901 Manual del propietario

Hamilton Beach

Hamilton Beach Steam Elite 14011 Hoja de instrucciones

Hamilton Beach

Hamilton Beach 14413 - Easy Touch Non-Stick Iron Manual del propietario

Hamilton Beach

Hamilton Beach HIR200R Manual de usuario

Hamilton Beach

Hamilton Beach HIR750 DURATHON IRON Manual de usuario

Hamilton Beach

Hamilton Beach 14210 Manual de usuario

Hamilton Beach

Hamilton Beach 14885C Manual de usuario

Hamilton Beach

Hamilton Beach 14963 Manual de usuario

Hamilton Beach

Hamilton Beach 14289 Manual de usuario

Hamilton Beach

Hamilton Beach 840129100 Manual de usuario

Hamilton Beach

Hamilton Beach Proctor Silex Manual del propietario

Hamilton Beach

Hamilton Beach 14280 Manual de usuario

Hamilton Beach

Hamilton Beach 14975 - Professional Iron Manual de usuario

Hamilton Beach

Hamilton Beach 14506 Manual del propietario

Hamilton Beach

Hamilton Beach 14700 Manual de usuario

Hamilton Beach

Hamilton Beach 840117300 Manual de usuario

Hamilton Beach

Hamilton Beach 17130 Manual de usuario

Hamilton Beach

Hamilton Beach 14751 Manual del propietario

Hamilton Beach

Hamilton Beach 19702-IS Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario