Haier XQBM20-E Manual de usuario
Names of the parts.............the 2nd cover
Safety precautions .............................1
Installation and adjustment .................3
Install the water inlet hose..................5
Preparation before washing .............7
Put in the laundries ............................8
Add the detergent ..............................9
Close the top lid ...............................10
Select water level .............................10
Select program .................................10
Turn the knob. .................................12
The washing is finished ...................12
Disposal after washing .....................13
Trouble shooting Answer to question......14
Packing list .......................................15
Specification.................the back cover
Contents
Before using
Using process
User's Manual
Fully-auto Washing Machine
XQBM20-E
Please read this manual carefully before using.
Retain it for reference
Please check if the power receptable is earthed
reliably before usage to guarantee your safety.
The manufacturer is not responsible for any
risks occurred owing to disobey these
stipulations.
Meaning and description of the symbols
ʹÓÃ֮ǰʹÓÃ֮ǰ
ʹÓÃ֮ǰʹÓÃ֮ǰ
Before Using
Before Using
Names of the parts
the end connecting
to the water inlet
hose jointer
the end connecting to
the washing machine
Warning sign
Forbidding sign
Contents marked with that symbol
are related to the safety of the
product and the personal safety
of the users. Please operate in
strictconformity to the contents,
otherwise it may cause damage
of the machine or injure the
personal safety of the user.
Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
Accessories
Adjustable foot
bottom plate
(one)
water inlet hose
(one)
ST4X16
tapping screws
(8 purchase)
Power line
Drain Hose
Handle
Back cover Fixed Foot(3 Pcs)
Water level knob
Water inlet valve
Water absorption
gasket
Top lid
Control panel
seat
lint filter
Inner tub
Pulsator
Cabinet
Cabinet,lower
Control panel filmControl panel film
Lint filter
(one)
Before Using
Before Using
Safety precautions
If the power line is bad, to avoid risk it is required to have it replaced by the technicians
of our special shop or our agent or the after-sale service department. Keep the pin of
the power plug clean.
Do not put the machine at damp place like
the bathroom. Never wash it with water.
Do not use water hotter than 50
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
soft items
The ventilation holes
at the bottom
Do not let the machine share one receptacle
with other electric appliances. If the power
plug is damaged, or the plugging into the
receptacle is loose, do not use the plug any
more.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
Be sure to earth the earthing wire reliably. When the machine is normally using, please
put the power plug at the location easily to
be inserted and extracted by hand. Be sure
to pull the plug off when there'spower failure,
or the machine is being moved, cleaned or
when it is idle.
2
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
Before Using
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.
Petrol
Thinner
Safety precautions
To prevent your laundries and washing
machine from damage,be sure to take out
all of the foreign materials from your pocket,
such as coins,buttons,sand or hair pins etc.
Before washing,please check if the water
tap is open,and if the water inlet pipe is
connected properly.
It is suggested to use low-foaming washing
powder.
Please keep the lint filter in good condition,
and install it to proper position. If the lint
filter is lost or damaged, please contact
the local after-sales service department of
our company.
3
3
Before Using
Before Using
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
The largest allowed slope of the shank base of the machine is 2 . The slanting or
rough ground will result in unstable running or stoppage of the machine. Please
adjust it with following methods:
Confirm it's horizontal:
Adjust the adjustable foot:
Hang the lead line to confirm if it is horizontal.
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of
the machine with the eight screws by
a cross screwdriver, then lift the machine
up gently. See to the figure:
Adjust the installation position
soft items
Bottom plate Screw
Loosen Fasten
High Low
adjustable nut
adjustable foot
Back
Front
1.To twist the adjustable foot, please first
lift up the side of the foot slightly, loosen
the adjustable nut, and twist the foot.
2.Fasten the nut after adjustment.
Installation and adjustment
4
1.Lean the machine down gently with the front
surface facing the ground. Loosen the eight
screws by a cross screwdriver.
3.Extend the drain hose from the left side. Push the
drain hose into the groove with hands.
4.Install the bottom plate (as per indicated before),
then lift the machine up gently.
2.Pull out the drain hose from the groove at the
right side.
Back
Front
Bottom plate
Soft item
Use groove at
this side after
direction changing
Page 3
Push the drain hose
into the groove with
hands at this point
Before Using
Before Using
How to change the direction of the drain hose
Usage of the drain hose
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not trample or press the drain hose.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 26mm, and the length shall
not exceed 1.5m.
If the extra hose is too long, cut it
either at Aor at B point.
The drain hose shall drain smoothly
5
Before Using
Before Using
Install the water inlet hose
Confirm the water faucet
.
.
Note:
1. Insert a new flat washer into the end of the inlet hoses. Firmly put the
washers in the coupling.
You may have to use pliers to tighten the coupling. Do not over tighten
because you may cause damage to the valve.
2. Connect the water inlet hose to the water taps.
3. Connect the other ends to their respective washer inlets located at the
rear of the washer.
Water absorption cushion
Nut of the water inlet hose
Jointer of the water inlet valve
4. Check connection between the adapter of water inlet pipe and water faucet.
1)Slightly move water pipe to check whether is secured.
2)Except for the device,open water faucet to check water leakage.
3)Test and ensure that the connecting matter is indeed normal,then can use
normally.
4)Don't fold water pipe improperly.
5)Check connection between adapter of water inlet pipe and water faucet
before using to avoid water drip due to improper usage of the device.
Confirm if
there's special
requirment for
the laundries.
Clear the pocket.
Take out the
coins , sand,
hairpins etc.
Fasten the
buttons and
zippers.
When the pulsator
is running , the
buttons of the
laundries may
cause noise. For
the sake of
discretion,please
put the laundries
with buttons into
other laundries.
Preparation before washing
1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
Using process
Using process
1 Preparation before washing
Pay attention to followings before washing the laundries
a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not waterabsorbing,please put them into water with hands.
d.For laundries with much soil,please remove the soil first.You can add detergent on the
part with serious soil directly.It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before
putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,
please put them into mesh bag before wasing.
Reference weight of the laundries:
working suit up,down
jeans about 800g
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition that can be washed
or spinned in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 2.0kg.
The thickness, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select "High" water level for laundries small
than 0.5kg, so as to avoid splashing of water.
To wash thin laundries like the stocking, silk etc.,
please first put them into washing mesh bag (which
can be purchased separately) before wash.
shirt jacket
single bed sheet
Socks
underpants
undershirt
pajamas
blanket
cotton,about 900g
cotton,about
300g
cotton,about
800g
cotton,about 600g
blending,about 50g
cotton,about 70g
cotton,about 180g
Using process
Using process
2 Put in the laundries
cotton,about 1120g
blending coat
(about 800g)
3
Laundries
Quantity(kg) Water level Water quantity
Concentrated powder,
add 25g in each
30L water
2.0-1.0
1.0-0.5
Below0.5
High
Middle
Low
About 30L
About 22L
About 12L
About 40g
About 30g
About 16g
About 25g
About 18g
About 10g
How to use the washing powder
How to use the whitener
Inlet the water to desired level, dilute the
whitener with container, and pour it into the
tub slowly.
Laundries with colors or patterns are more prone
to loose color. Do not use whitener on them.
The whitener should not be made to contact
the laundries directly.
The usage and use level of the whitener
please refer to the User's manual of it.
For the whitener in powder, first dissolve it
then use.
Direct dissolved in the machine
1. Inlet some water.
2. Add the powder. Run for 3 minutes to
dissolve it fully.
3. Put in the laundries. Select suitable
water level.
The instant dissolving of the washing powder:
1. Prepare warm water at 30 in a container.
2. Add the powder while stirring so as to fully
dissolve it.
3. Put in the powder with right quantity accord-
ing to the laundry ,water quantity and water
level.
The above method is only applicable in
manual selection of the water level.
Selection of the water level,water quantity and the quantity of the
washing powder
Add the detergent
Common powder,
add 40g in each
30L water
Using process
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Arandela de Haier
Haier
Haier slim3 Manual de usuario
Haier
Haier HWM95-987S Manual de usuario
Haier
Haier HWD100-FD756DD Manual de usuario
Haier
Haier HWS60-12F2S Manual de usuario
Haier
Haier HDS1000TXVE Manual de usuario
Haier
Haier HW50-10F1 Manual de usuario
Haier
Haier HSW-50S5 Manual de usuario
Haier
Haier HWM26-10A Manual de usuario
Haier
Haier HW-E1270TVE Manual de usuario
Haier
Haier JW-YP60A Manual de usuario
Haier
Haier HLPW028BXW Manual de usuario
Haier
Haier HWMP95TL Manual de usuario
Haier
Haier HWD80-BP14636S Manual de usuario
Haier
Haier HN800TX Guía del usuario
Haier
Haier HWM60-0566B Manual de usuario
Haier
Haier mini33 Manual de usuario
Haier
Haier HW80-DM14876TNZP Manual de usuario
Haier
Haier HBF1055TVE Manual de usuario
Haier
Haier HW70-1001 Manual de usuario
Haier
Haier HWM70-12688NZP Manual de usuario
