Hach DR2400 Manual de usuario

59456-88

INSTRUCTION SHEET

DR/2400 Lamp Module Replacement

Replacing the Lamp Module

Turn off the power switch and remove the cell holder. Disconnect the power

supply and the computer/printer cable.

Note: Some

internal

components may

be damaged by static

electricity. Use static

discharge protection.

Removing the Batteries

Place the instrument upside down on a padded surface. Depress the ribbed tab

and slide the battery cover off of the instrument. Remove the batteries.

Figure 1 Removing the Compartment Fasteners

1. Use the T10 L-Key supplied in the Lamp

Replacement Module Kit (Cat. No. 59456-00 or

59648-01) to remove the two Torx fasteners that

secure the battery compartment.

Figure 2 Positioning the Battery Compartment 2. Lift the battery compartment until it just clears the

instrument cabinet. Without twisting or straining

the power ribbon, rest the battery compartment on

the cabinet bottom.

3. Remove the two Torx fasteners that secure the

Lamp Module.

Note: Set the screws aside before removing the module to

eliminate the possibility of dropping the screws into the slot

for the lamp module.

DR/2400 Lamp Module Replacement, continued

HACH COMPANY

WORLD HEADQUARTERS

Telephone: (970) 669-3050

FAX: (970) 669-2932

FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:

Call 800-227-4224

Contact the HACH office or distributor serving you.

www.hach.com [email protected]

In the U.S.A. –

Outside the U.S.A. –

On the Worldwide Web – ; E-mail –

toll-free

Components

Description Cat. No.

Lamp Module Replacement

Serial Numbers less than 030900002600...................................................................................................... 59456-00

Serial Numbers 030900002600 and higher.................................................................................................. 59648-01

Instruction Sheet............................................................................................................................................. 59456-88

T10 L-Key......................................................................................................................................................... 59117-00

Torx Screws...................................................................................................................................................... 49440-00

Figure 3 Removing the Lamp Module 59456-00

(serial numbers less than 030900002600)

Note: For serial numbers 030900002600 and higher using

Cat. No. 59648-01, proceed to step 8.

4. Grasp the tab and pull the module out of the

recess.

5. Insert the replacement Lamp Module

(Cat. No. 59456-00). Push where indicated by the

arrows to fully seat the module. Ensure that the

lamp module is fully inserted before installing the

screws.

6. Reassemble the battery compartment, and replace

the batteries.

7. Return the instrument to the upright position and

restore power and other cable connections. No

calibration is necessary for the lamp module.

Figure 4 Removing Lamp Module 59648-01

(serial numbers 030900002600 and higher)

8. Grasp the tab and pull the module out of the

recess.

9. Insert the replacement Lamp Module

(Cat. No. 59648-01). Push where indicated by the

arrows to fully seat the module. Ensure that the

lamp module is fully inserted before installing the

screws.

10. Reassemble the battery compartment, and replace

the batteries.

11. Return the instrument to the upright position and

restore power and other cable connections. No

calibration is necessary for the lamp module.

Otros manuales para DR2400

Otros manuales de Instrumento de medición de Hach

Hach

Hach BioTector B7000i Manual de usuario

Hach

Hach PHOSPHAX sigma High Range Manual rápido

Hach

Hach polymetron 9240 Manual de usuario

Hach

Hach orbisphere C1100 Manual de usuario

Hach

Hach ORBISPHERE 410 Manual rápido

Hach

Hach ANATEL PAT700 Manual de usuario

Hach

Hach LBOD101 Manual de usuario

Hach

Hach ANATEL PAT700 Manual de usuario

Hach

Hach LDO10101 Manual de usuario

Hach

Hach sensION3 Guía de referencia

Hach

Hach DOC026.52.00769 Manual de usuario

Hach

Hach sensION+ pH3 Manual de usuario

Hach

Hach NITRATAX plus sc Manual de usuario

Hach

Hach POLYMETRON 8362 Manual de usuario

Hach

Hach 2100Q Manual rápido

Hach

Hach QbD1200+ Manual de usuario

Hach

Hach 2200 PCX Manual rápido

Hach

Hach DR/2010 Manual de usuario

Hach

Hach 2100P Guía de referencia

Hach

Hach POCKET COLORIMETER II Manual de usuario

Hach

Hach 9586sc Manual rápido

Hach

Hach H128 Manual de usuario

Hach

Hach 500sc SiO2 Manual de instrucciones

Hach

Hach DR 2800 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario