H3C S9500 Series Instrucciones de instalación
Command Manual – BPDU Tunneling
H3C S9500 Series Routing Switches Table of Contents
i
Table of Contents
Chapter 1 BPDU Tunneling Configuration Commands.............................................................1-1
1.1 BPDU Tunneling Configuration Commands......................................................................1-1
1.1.1 bpdu-tunnel dot1q enable .......................................................................................1-1
1.1.2 bpdu-tunnel dot1q stp .............................................................................................1-2
Command Manual – BPDU Tunneling
H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands
1-1
Chapter 1 BPDU Tunneling Configuration
Commands
1.1 BPDU Tunneling Configuration Commands
1.1.1 bpdu-tunnel dot1q enable
Syntax
bpdu-tunnel dot1q enable
undo bpdu-tunnel dot1q enable
View
System view, Ethernet interface view, port group view
Default Level
2: System level
Parameters
None
Description
Use the bpdu-tunnel dot1q enable command to enable BPDU tunneling.
Use the undo bpdu-tunnel dot1q enable command to disable BPDU tunneling.
Configured in system view, the command enables or disables BPDU tunneling globally;
configured in Ethernet interface view, the setting is effective on the current port only;
configured in interface view, the command enables or disables BPDU tunneling on the
current port only; configured in port group view, the command enables or disables
BPDU tunneling on all ports in the port group.
By default, BPDU tunneling is enabled globally but disabled for all ports.
Note:
zThe configured BPDU tunneling on a port cannot take effect unless BPDU
tunneling is enabled globally.
zOn an Ethernet interface, BPDU tunneling is not compatible with GVRP. To enable
BPDU tunneling on the Ethernet interface, you must disable GVRP on the interface.
Command Manual – BPDU Tunneling
H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands
1-2
Examples
# Enable BPDU tunneling globally.
<Sysname> system-view
[Sysname] bpdu-tunnel dot1q enable
# Enable BPDU tunneling on the Ethernet 1/1/1 port.
<Sysname> system-view
[Sysname] interface ethernet 1/1/1
[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q enable
1.1.2 bpdu-tunnel dot1q stp
Syntax
bpdu-tunnel dot1q stp
undo bpdu-tunnel dot1q stp
View
Ethernet interface view, port group view
Default Level
2: System level
Parameters
None
Description
Use the bpdu-tunnel dot1q stp command to enable STP BPDU tunneling for a port or
a group of ports.
Use the undo bpdu-tunnel dot1q stp command to disable STP BPDU tunneling for a
port or a group of ports.
By default, STP BPDU tunneling is disabled for all ports.
Configured in Ethernet interface view, the setting is effective on the current port only;
configured in port group view, the setting is effective on all ports in the port group.
Caution:
Before you can enable STP BPDU tunneling on a port, enable BPDU tunneling and
disable STP on the port.
Command Manual – BPDU Tunneling
H3C S9500 Series Routing Switches Chapter 1 BPDU Tunneling Configuration Commands
1-3
Related commands: bpdu-tunnel dot1q enable.
Examples
# Enable STP BPDU tunneling on Ethernet 1/1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1/1
[Sysname-Ethernet1/1/1] stp disable
[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q enable
[Sysname-Ethernet1/1/1] bpdu-tunnel dot1q stp
Otros manuales para S9500 Series
73
Tabla de contenidos
Otros manuales de Cambiar de H3C
H3C
H3C S3610 Series Instrucciones de instalación
H3C
H3C s5820x series Manual de usuario
H3C
H3C S9820-64H Manual de usuario
H3C
H3C S5500-EI series Manual de usuario
H3C
H3C S7500 Series Manual de usuario
H3C
H3C S6300 Series Manual de usuario
H3C
H3C S6890 Series Guía rápida
H3C
H3C S12500 Series Manual de servicio
H3C
H3C S5560X-30C-EI Manual de usuario
H3C
H3C S10506 Manual de operación y mantenimiento
H3C
H3C S9500 Series Manual de usuario
H3C
H3C S9500 Series Manual de usuario
H3C
H3C S12500CR Series Manual de usuario
H3C
H3C S9500 Series Manual de usuario
H3C
H3C S5500-SI Series Manual de usuario
H3C
H3C S9500 Series Manual de usuario
H3C
H3C S12500R-2L Manual de usuario
H3C
H3C S10500 Series Manual de usuario
H3C
H3C S9825 Series Manual de usuario
H3C
H3C H3C S5600 Series Manual de usuario
