H3C S3610 Series Instrucciones de instalación
H3C S3610&S5510 Series Ethernet Switches
Command Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08192P-20070813-C-1.03
Product Version: Release 5301
Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
customer_service@h3c.com
http://www. h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C S3610&S5510 Series Ethernet Switches
documentation set includes the following:
Manual Description
H3C S3610&S5510 Series Ethernet
Switches Operation Manual-Release
5301
It is used for assisting the users in data
configurations and typical applications.
H3C S3610 Series Ethernet Switches
Installation Manual It provides information for the system
installation.
H3C S5510 Series Ethernet Switches
Installation Manual It provides information for the system
installation.
Organization
H3C S3610&S5510 Series Ethernet Switches Command Manual Release 5301 is
organized as follows:
Part Contents
1 Login Introduces the commands used for logging into the Ethernet
switch.
2 VLAN Introduces the commands used for configuring VLAN, Voice
VLAN, and GVRP.
3 IP Addressing and
Performance Introduces the commands used for configuring IP address
and IP performance
4 QinQ-BPDU
Tunneling Introduces the commands used for configuring QinQ and
BPDU Tunneling.
5 Port Correlation
Configuration Introduces the commands used for configuring basic port
configuration and port isolation.
6 Link Aggregation Introduces the commands used for configuring manual link
aggregation static LACP link aggregation.
7 MAC Address
Table Management Introduces the commands used for configuring MAC
address forwarding table.
Part Contents
8 IP Source Guard Introduces the commands used for configuring IP Source
Guard.
9 MSTP Introduces the commands used for configuring STP and
BRDU tunnel.
10 IPv6 Introduces the commands used for configuring IPv6
application, IPv6 tunneling, and so on.
11 Routing Overview Introduces the commands used for display and debugging
IPv4/IPv6 routing protocols.
12 IPv4 Routing Introduces the commands used for configuring IPv4 routing,
static routing, RIP, OSPF, IS-IS, BGP, and route policy.
13 BFD-GR Introduces the commands used for configuring BFD and
GR.
14 IPv6 Routing Introduces the commands used for configuring IPv6 routing,
static routing, RIPng, OSPFv3, IPv6 IS-IS, and IPv6 BGP.
15 Multicast Protocol Introduces the commands used for configuring IGMP
Snooping, MLD Snooping, multicast VLAN, IGMP, PIM-DM,
PIM-SM, and MSDP.
16
802.1x-HABP-MAC
Authentication
Introduces the commands used for 802.1x, HABP and MAC
address authentication related configurations.
17
AAA-RADIUS-HWT
ACACS
Introduces the commands used for AAA, RADIUS,
HWTACACS, and the related configurations.
18 ARP Introduces the commands used for ARP and the related
configuration.
19 DHCP Introduces the commands used for DHCP and the related
configuration.
20 ACL Introduces the commands used for IPv4&IPv6-based ACL
and the related configuration.
21 QoS Introduces the commands used for QoS and the related
configuration.
22 Port Mirroring Introduces the commands used for port mirroring and the
related configuration.
23 Cluster
Management Introduces the commands used for cluster and the related
configuration.
24 UDP Helper Introduces the commands used for UDP Helper and the
related configuration.
25 SNMP-RMON Introduces the commands used for the configuration to
manage network devices through SNMP and RMON.
26 NTP Introduces the commands used for NTP and the related
configuration.
Part Contents
27 DNS Introduces the commands used for DNS and the related
configuration.
28 File System
Management Introduces the commands used for file system
management.
29 Information
Center
Introduces the commands used for the configuration to
analyze and diagnose networks using the information
center.
30 System
Maintaining and
Debugging
Introduces the commands used for daily system
maintenance and debugging.
31 NQA Introduces the commands used for NQA and the related
configuration.
32 VRRP Introduces the commands used for VRRP and the related
configuration.
33 SSH Introduces the commands used for SSH and the related
configurations.
34 MCE Introduces the commands used for MCE and the related
configurations.
35 OAM Introduces the commands used for OAM and the related
configurations.
36 DLDP Introduces the commands used for DLDP and the related
configurations.
37 RRPP Introduces the commands used for RRPP and the related
configurations.
38 SSL-HTTPS Introduces the commands used for SSL and HTTPS
configurations.
39 PKI Introduces the commands used for PKI and the related
configurations.
40 Appendix Lists all the commands described in this command manual in an
alphabetic order. The parts and pages where the commands are
described are also given.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
Convention Description
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n> The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Otros manuales para S3610 Series
21
Este manual sirve para los siguientes modelos
1
Otros manuales de Cambiar de H3C
H3C
H3C S5830V2 series Manual de instalación
H3C
H3C SOHO IE4300 Manual de instalación
H3C
H3C S12500 Series Manual de usuario
H3C
H3C S6800 Series Manual de usuario
H3C
H3C PSR600-54A-B Manual de usuario
H3C
H3C S6820-56HF Manual de operación y mantenimiento
H3C
H3C S12500 Series Manual de usuario
H3C
H3C LS-3100-52P-OVS-H3 Manual de usuario
H3C
H3C S5830V2 series Manual de usuario
H3C
H3C S5500-EI series Manual de usuario
H3C
H3C S6820 Series Guía rápida
H3C
H3C S9500 Series Manual de usuario
H3C
H3C S5830V2 series Manual de usuario
H3C
H3C H3C S3600 Series Instrucciones de instalación
H3C
H3C S3100V2 Series Manual de usuario
H3C
H3C S3610 Series Manual de usuario
H3C
H3C S5120-EI Series Manual de operación y mantenimiento
H3C
H3C S3100-52P Instrucciones de instalación
H3C
H3C H3C S3600 Series Manual de usuario
H3C
H3C S12500X-AF Series Guía rápida
