H3C S12500R Series Guía de aplicación

H3C S12500R Switch Router Series

Hardware Reference

New H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W101-20201015

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Preface

This document describes the hardware information of H3C S12500R switch routers, including

chassis views and technical specifications, FRUs and compatibility matrixes, LEDs, and cables.

This preface includes the following topics about the documentation:

•

Audience.

•

Conventions.

•

Documentation feedback.

Audience

This documentation is intended for:

•

Network planners.

•

Field technical support and servicing engineers.

•

Network administrators working with the S12500R switch routers.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention

Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntaxchoices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention

Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create >

Folder.

Symbols

Convention

Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION:

An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT:

An alert that calls attention to essential information.

NOTE:

An alert that contains additional or supplementary information.

TIP:

An alert that provides helpful information.

Network topology icons

Convention

Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

1 Chassis views and technical specifications··············································1-1

Chassis views·················································································································································1-1

Chassis components·······································································································································1-2

Technical specifications··································································································································1-5

Weights and dimensions·························································································································1-5

Module power consumption and system power consumption·································································1-7

Heat dissipation·······································································································································1-8

Environmental specifications···················································································································1-8

Chassis ordering information ··························································································································1-8

1-1

1 Chassis views and technical

specifications

The H3C S12500R Ethernet Switch Router Series is a set of next-generation rack switch routers

designed for data center core networks. It optimizes the CLOS switching fabric architecture and uses

the variable cell-based traffic scheduling and control forwarding mechanism to deliver higher

forwarding efficiency, more refined congestion control, and hierarchical scheduling.

Unless otherwise stated, MPUs, service modules, and fabric modules are collectively referred to as

"modules" in this document.

Chassis views

Figure 1-1 S12516R

1-2

Figure 1-2 S12508R

Figure 1-3 S12504R

Chassis components

The device has an MPU section, service module section, power module section, fan tray section,

and fabric module section. The following figure uses the S12516R for illustration.

1-3

Figure 1-4 Front and rear views of the S12516R

(1) MPU section

(2) Service module section

(3) Power module section

(4) Fan tray section

(5) Fabric module section

Table 1-1 Description for the device sections

Section Description

MPU section

•(S12516R and S12508R—Ejector levers

of the MPUs and ejector lever pillow

blocks on the MPU slots are pink marked.

The MPU slots are above the service

module slots.

•S12504R—MPU slot numbers on the

chassis and the names on the MPUs are

pink marked. The MPU slots are below

the service module slots.)

No MPUs are provided with the device. Purchase MPUs

yourself.

The device has two MPU slots. You can install one MPU,

or two MPUs for redundancy for the device. To install only

one MPU for the device, you can install it in either of the

MPU slots.

Service module section

(The edges or ejector levers of the service

modules and the ejector lever pillow blocks on

the service module slots are purple marked.)

No service modules are provided with the device.

Purchase service modules yourself.

•S12516R—16 service module slots.

•S12508R—8 service module slots.

•S12504R—4 service module slots.

You can install a service module in any of the empty

service module slots.

1-4

Section Description

Power module section

No powermodules are provided with the device. Purchase

power modules yourself.

•S12516R—16 power module slots, with eight on

each side of the chassis rear.

•S12508R—8 power module slots, with four on each

side of the chassis rear.

•S12504R—4 power module slots, with two on each

side of the chassis rear.

The device supports N+N (dual power input lines) and N+1

(single power input line) power module redundancy.

Determine the number of power modules based on power

supply mode and the system power consumption.

You can install a power module in any of the empty power

module slots.

Fan tray section

(The fan tray section is at the rear of the

chassis. Each fan tray covers three fabric

module slots.)

No fan trays are provided with the device. Purchase fan

trays yourself.

The device provides two fan tray slots FAN1 and FAN2. It

can operate correctly with one fan tray. As a best practice,

install two fan trays for the device to achieve redundancy.

Fabric module section

(Covered by the fan trays)

No fabric modules or fabric module slot filler panels are

provided with the device. Purchase fabric modules and

fabric module slot filler panels yourself.

•Configure two to six fabric modules for the device.

Install filler panels in the empty fabric module slots.

•The fabric module slots are covered by fan trays. To

replace a fabric module, remove the fan tray above it.

Table 1-2 describes the slot arrangements for the removable components.

Table 1-2 Slot arrangement for the removable components

Model MPU Service

module Fabric module Power

module Fan tray

S12516R Slots 0 and 1 Slots 2 to 17

Slots 18 to 23

•Slots 18 to 20 are

covered by FAN 1.

•Slots 21 to 23 are

covered by FAN 2.

PWR 1 to

PWR 16

FAN 1

and FAN

S12508R Slots 0 and 1 Slots 2 to 9

Slots 10 to 15

•Slots 10 to 12 are

covered by FAN 1.

•Slots 13 to 15 are

covered by FAN 2.

PWR 1 to

PWR 8

FAN 1

and FAN

S12504R Slots 4 and 5 Slots 0 to 3

Slots 6 to 11

•Slots 6 to 8 are covered

by FAN 1.

•Slots 9 to11 are covered

by FAN 2.

PWR 1 to

PWR 4

FAN 1

and FAN

Otros manuales para S12500R Series

Tabla de contenidos

Otros manuales de Enrutador de red de H3C

H3C

H3C S12508CR Manual de operación y mantenimiento

H3C

H3C WT2024-U-PWR Manual de instrucciones

H3C

H3C S1016 Manual de usuario

H3C

H3C MSR810 Manual de usuario

H3C

H3C S3100-52P Instrucciones de instalación

H3C

H3C S3100 Series Instrucciones de instalación

H3C

H3C MSR 20-20 Manual de instalación

H3C

H3C SR6600 SPE-FWM Manual de usuario

H3C

H3C SR8800 IM-FW-II Manual de usuario

H3C

H3C S3100-52P Manual de usuario

H3C

H3C SR8803-F Manual de usuario

H3C

H3C CR16006-F Guía rápida

H3C

H3C SecPath M9000-S NSQM2MPUD0 Manual de usuario

H3C

H3C S3600V2 SERIES Manual de usuario

H3C

H3C S5510 Series Manual de usuario

H3C

H3C MSR5620 Manual de usuario

H3C

H3C SR6600 SPE-FWM Manual de usuario

H3C

H3C SR6616 Manual de usuario

H3C

H3C RA10 Manual de usuario

H3C

H3C SR6600 SPE-FWM Manual de usuario

H3C

H3C SR6600 Series Manual de usuario

H3C

H3C S3100-52P Instrucciones de instalación

H3C

H3C H3C S7500E Series Manual de instalación

H3C

H3C H3C S7500E Series Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad