H3C SecPath M9000-AI-E8 Manual de usuario

Contents

Preparing for installation················································································1

Safety recommendations ···································································································································1

General safety recommendations··············································································································1

Electricity safety·········································································································································1

Handling safety ··········································································································································1

ESD prevention··········································································································································1

Laser safety················································································································································2

Examining the installation site····························································································································2

Weight support···········································································································································2

Space·························································································································································2

Cooling·······················································································································································3

Power·························································································································································4

Lightning protection····································································································································5

Temperature···············································································································································5

Humidity·····················································································································································5

Cleanliness·················································································································································6

EMI·····························································································································································6

Installation tools and accessories ······················································································································7

Pre-installation checklist·····································································································································7

Preparing for installation

H3C SecPath M9000-AI multiservice security gateways include the M9000-AI-E8 gateway and

M9000-AI-E16 gateway.

Safety recommendations

To avoid bodily injury and equipment damage, read all safety recommendations carefully before

installation. Note that the recommendations do not cover every possible hazardous condition.

General safety recommendations

•

Keep the gateway clean and dust-free.

•

Do not place the gateway on a moist area, and avoid liquid flowing into the gateway.

•

Make sure the ground is dry and flat and anti-slip measures are in place.

•

Keep the gateway and installation tools away from walk areas.

•

Do not wear loose clothing, jewelry (for example, necklace) or any other things that could get

caught in the chassis when you install and maintain the gateway.

Electricity safety

•

Clear the work area of possible electricity hazards, such as ungrounded power extension

cables, missing safety grounds, and wet floors.

•

Locate the emergency power-off switch in the room before installation so you can quickly shut

power off when an electrical accident occurs.

•

Unplug all external cables, including power cords, before moving the chassis.

•

Do not work alone when the gateway has power.

•

Always verify that power has been disconnected from a circuit.

Handling safety

When you move the gateway, follow these guidelines:

•

Remove all external cables, including the power cords, before moving the chassis.

•

As a best practice, use a mechanical lift to move the chassis. To move the chassis manually,

use multiple people.

•

Lift and put down the chassis slowly and never move suddenly.

•

Hold the handles of the chassis.

ESD prevention

To prevent the electric component from being damaged by electrostatic discharge (ESD), follow

these guidelines:

•

Ground the gateway correctly.

•

Always wear an ESD wrist strap and make sure it is correctly grounded when installing FRUs.

•

Hold a PCB by its edges. Do not touch any electronic components or printed circuit.

•

Put modules away in antistatic bags for future use.

NOTE:

The gateway has an ESD socket at both the front and rear.

Laser safety

WARNING

•

Disconnected optical fibers or transceiver modules might emit invisible laser light. Do not stare

into beams or view directly with optical instruments when the gateway is operating.

•

Before you remove the optical fiber connector from a fiber port, execute the shutdown

command in interface view to shut down the port.

CAUTION:

•

Insert optical fiber

caps into open optical fiber connectors to protect them from contamination and

ESD damage.

•

Insert dust plugs into open fiber ports and transceiver module ports to protect them from

contamination and ESD damage.

Examining the installation site

The gateway must be used indoors. To ensure the correct operation and long service life of your

gateway, the installation site must meet the requirements in this section.

Weight support

Make sure the floor can support the total weight of the rack, chassis, and accessories. Additionally,

the floor loading plan must also consider system expansion, such as adding more modules. For

more information, see "Appendix B Technical Specifications."

Space

For easy installation and maintenance, make sure the following requirements are met:

•

Make sure the rack has enough space (in height and depth) to accommodate the gateway.

•

The rack allows front and rear access to the gateway.

•

Aminimum clearance of 1.2 m (3.94 ft) is reserved between the rack and walls or other devices.

For more information about the chassis dimensions, see "Appendix B Technical Specifications."

Table 1 Gateway dimensions and rack requirements

Model Chassis dimensions Rack requirements

M9000-AI-E8

•Height—264 mm (10.39 in)

•Width—440 mm (17.32 in)

•Depth—977 mm (38.46 in)

857 mm (33.74 in) for the

chassis

90 mm (3.54 in) for the cable

management brackets at the

•A minimum of 1.1 m (3.61 ft) in depth

(recommended).

•A minimum of 140 mm (5.51 in) between

the front rack posts and the front door.

•A minimum of 950 mm (37.40 in) between

the front rack posts and the rear door.

Model Chassis dimensions Rack requirements

chassis front

30 mm (1.18 in) for the ejector

levers of the fan tray at the

chassis rear

M9000-AI-E16

•Height—841.7 mm (33.14 in)

•Width—440 mm (17.32 in)

•Depth—735 mm (28.94 in)

640 mm (25.20 in) for the

chassis

95 mm (3.74 in) for the cable

management brackets at the

chassis front

12 mm (0.47 in) for the

captive screw of the fan tray

at the chassis rear

Figure 1 Rack dimensions

Cooling

The gateway uses front-to-rear airflow for heat dissipation. Plan the installation site for the gateway

based on its airflow direction for adequate ventilation. Make sure the following requirements are met:

•

The installation site has a good cooling system.

•

The rack for the gateway has a good cooling system.

•

Leave a minimum clearance of 300 mm (11.81 in) around the inlet and outlet air vents.

Rack

Rear door

Chassis

Front door

Front rack post

≥140 mm

(5.51 in)

≥950 mm

(37.40 in)

Figure 2 Airflow through the chassis (M9000-AI-E16 gateway)

Power

Agood power supply system is essential for correct operation of the gateway. The gateway supports

AC and DC power inputs. Make sure the equipment room meets the following requirements for the

power supply systems.

•

The AC power supply system is stable and reliable and capable of providing power required by

the gateway. Prepare a diesel generator as a backup power source except for the power lines.

•

The DC power supply system is stable and reliable and its output voltage is stable and within

the acceptable range allowed by the gateway.

•

Enough batteries are available to ensure uninterrupted device operation in the event of a power

failure.

For the power supply system to provide power as required by the router:

1. Calculate the system power consumption.

The system power consumption varies by module type and density. For more information about

system power consumption calculation, see "Appendix B Technical Specifications."

2. Select power supplies and identify the number of power supplies.

The total maximum output power of all power supplies must be higher than the system power

consumption. For more information about available power supplies, see "Appendix A FRUs and

Compatibility Matrixes."

Lightning protection

To protect the gateway from the lightning, make sure the following requirements are met:

•

The grounding cable for the chassis is correctly grounded.

•

The grounding terminal of the AC power receptacle is correctly grounded.

•

If an AC power cord is routed from outdoors for connecting to the device, connect the power

cord first to a power lightning arrester before connecting it to the power receptacle on the

device.

•

If a network cable is routed from outdoors for connecting to the device, connect the network

cable first to a network port lightning arrester before connecting it to the port.

IMPORTANT:

•

No network port lightning arrester or AC power lightning arrester is provided with the device.

Purchase them as required.

•

For the technical specifications and installation instructions for the lightning arresters, see the

documents shipped with them.

Temperature

CAUTION:

If condensation appears on the chassis when you move it to a high

-temperature environment, dry

the chassis before powering it on to avoid short circuits.

If the temperature in the equipment room is too high, too low, or changes dramatically, the device

reliability is reduced and its service lifetime is shortened.

High temperature can accelerate the aging of insulation materials and significantly lower the

reliability and lifespan of the gateway.

To ensure the correct operation of the gateway, make sure the room temperature meets the

requirements in Table 2.

Table 2 Temperature requirements

Temperature Range

Operating temperature 0°C to 45°C (32°F to 113°F)

Storage temperature –40°C to +70°C (–40°F to +158°F)

Humidity

Maintain appropriate humidity in your equipment room, as described in Table 3.

•

Lasting high relative humidity tends to cause poor insulation, electricity leakage, mechanical

property change of materials, and corrosion of metal parts.

•

Lasting low relative humidity is likely to result in loose screws due to washer contraction, and

even electrostatic discharge (ESD), which causes the circuits to fail.

Table 3 Humidity requirements

Humidity Range

Operating humidity 5% RH to 95% RH, noncondensing

Humidity Range

Storage humidity 5% RH to 95% RH, noncondensing

Cleanliness

Dust buildup on the chassis might result in electrostatic adsorption, which causes poor contact of

metal components and contact points. In the worst case, electrostatic adsorption can cause

communication failure.

Table 4 Dust concentration limit in the equipment room

Substance Concentration limit (particles/m3)

Dust particles ≤ 3 x 104

(No visible dust on desk in three days)

NOTE:

Dust particle diameter ≥ 5 µm

The equipment room must also meet limits on salts, acids, and sulfides to eliminate corrosion and

premature aging of components, as shown in Table 5.

Table 5 Harmful gas limits in an equipment room

Gas Max. (mg/m3)

SO21.0

H2S 0.5

NH33.0

Cl20.3

NO21.0

EMI

Electromagnetic interference (EMI) might be coupled from the source to the gateway through the

following coupling mechanisms:

•

Capacitive coupling

•

Inductive coupling

•

Radiative coupling

•

Common impedance coupling

•

Conductive coupling

To prevent EMI, take the following actions:

•

Filter interference from the power grid.

•

Keep the gateway grounding facilities away from grounding and lightning protection facilities of

other devices.

•

Keep the gateway far away from radio transmitting stations, radar stations, and high-frequency

devices to make sure the EMI levels do not exceed the compliant range.

•

Use electromagnetic shielding, for example, shielded interface cables, when necessary.

Installation tools and accessories

No installation tools are provided with the gateway. Prepare them yourself as required.

Figure 3 Installation tools

Figure 4 Installation accessories

Pre-installation checklist

Table 6 Pre-installation checklist

Item Requirements Result

Installation site Load bearing

•The floor or ground at the installation site can

support the sum of the weight of the gateway

and the rack.

•The slide rails can support the weight of the

gateway.

Space •There is a minimum clear height of 3 m (9.84

ft) (from the beam or the air duct to the floor) in

Item Requirements Result

the equipment room.

•There is a minimum clearance of 1200 mm

(47.24 in) between the rack and walls or other

devices.

Ventilation

•There is a minimum clearance of 300 mm

(11.81 in) around the inlet and outlet air vents.

•A good ventilation system is available at the

installation site.

Power supply

•The power supply system can output enough

power to maintain the device operation.

•An uninterrupted power supply (UPS) is

available.

•The power-off switch in the equipment room is

located so that the power can be immediately

shut off when an accident occurs.

Grounding

•The grounding specifications for the

equipment room comply with national and

industry standards.

•All communication devices in the equipment

room are reliably grounded.

•The working earthing and protective earthing

systems of the communication power supplies

use the same earthing conductor set with the

protective earthing system of the

communication devices.

Temperature 0°C to 45°C (32°F to 113°F).

Humidity 5% RH to 95% RH (noncondensing).

Cleanliness •Dust concentration ≤ 3 × 104 particles/m

•No visible dust on desk within three days.

EMI prevention

•Take effective measures to protect the power

system from the power grid system.

•Separate the operation ground of the gateway

from the grounding device or lightning

protection grounding device as far as

possible.

•Keep the gateway far away from radio

stations, radar and high-frequency devices

working in high current.

•Use electromagnetic shielding when

necessary.

Safety precautions

•The gateway is faraway from any heat source

and moist area.

•The emergency power switch in the

equipment room is located.

Accessories Installation accessories provided with the gateway.

Reference •Documents shipped with the gateway.

•Online documents.

Otros manuales para SecPath M9000-AI-E8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Puerta de H3C

H3C

H3C MSR2600-6-X1 Manual de operación y mantenimiento

H3C

H3C SecPath M9000 Series Manual de operación y mantenimiento

H3C

H3C VG 80-20 Manual de usuario

H3C

H3C ICT Converged Gateway Series Manual de usuario

H3C

H3C MSR3610-I-DP Manual de usuario

H3C

H3C SecPath M9000 Series Manual de usuario

H3C

H3C MSR3610-I Series Manual de operación y mantenimiento

H3C

H3C VG 80-20 Manual de instrucciones

H3C

H3C MSR3610-X1 Guía del usuario

H3C

H3C SecPath V100-S Manual de usuario

H3C

H3C SR6602-I AI Series Manual de operación y mantenimiento

H3C

H3C SecPath V1000-A Manual de usuario

H3C

H3C SecPath M9000-AI-E4 Manual de operación y mantenimiento

H3C

H3C VG 10-40 Manual de usuario

H3C

H3C VG 20-16 Manual de instrucciones

H3C

H3C SecPath M9000-AI-E8 Manual de usuario

H3C

H3C VG Series Manual de usuario

H3C

H3C VG Series Manual de usuario

H3C

H3C VG 21-08 Manual de usuario

H3C

H3C VG Series Hoja de instrucciones

H3C

H3C Voice Gateway H3C VG 10-10 Manual de usuario

H3C

H3C MSR2600-6-X1 Manual de usuario

H3C

H3C ICG2000 Manual de usuario

H3C

H3C MSR3610-I iMC EAD Guía de referencia rápida

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario