Grundig DTR 1760 MICRO Manual de usuario

DIGITAL TERRESTRIAL

RECEIVER

DTR 1760 MICRO

CONTENTS____________________________________________

4 General information

4 Packing contents

4 Receiving digital stations

4 Special features of your digital receiver

5 Set-up and safety

6-7 Overview

6 The digital receiver

6 The infrared receiver

7 The remote control

8-9 Connection and preparation

8 Connecting the antenna

8 Connecting the television

8 Connecting the infrared receiver

9 Connecting the mains adapter

9 Inserting batteries in the remote control

10-14 Basic settings

10 The menu

11 Searching for channels

12-13 Creating and editing favourite lists

14 Filtering channels in the channel list

15-17 Basic functions

15 Switching on and off

15 Mode selection

15 Selecting preset channels

15 Selecting stations from lists

16 Switching from the current station to the previous one

16 Adjusting the volume

16 Muting the sound

16 Using the options

17 TV guide

18 Teletext mode

18 Teletext

18 Additional functions

19-24 Settings

19-20 Picture settings

20-21 Language Settings

22 Menu settings

23-24 General settings

25-27 Additional functions

25 Automatic channel search

26 Manual channel search

27 Safety

ENGLISH

CONTENTS____________________________________________

28 Timer functions

29-30 Special settings

29 Resetting the receiver to its original state

29 Updating the digital receiver software

30 Changing remote control levels

31-34 Upgrading the television

31 Connecting the GRUNDIG television with G2 chassis (Digi 200)

32 Installing on the GRUNDIG television set

33-34 Operating the GRUNDIG television remote control

35-38 Information

35 Displaying station reception properties

35 Displaying device information

36 Technical data

36 Environmental note

37 Troubleshooting

38 Additional Information for units sold in the UK.

Packing contents

1DTR 1760 MICRO Digital Satellite Receiver

2Tele Pilot 766 S remote control

3Two batteries for the remote control (2 x 1.5 V, Mignon, e.g.

UM-3 or AA)

4Euro/AV (Scart) extension

5Mains adapter

6Infrared receiver

7Instruction Manual

Receiving digital stations

To use your new DTR 1760 MICRO digital receiver you need a

digital outdoor or indoor antenna.

Unlike analogue broadcasting, not every station has its own trans-

mission frequency. Instead, several stations are grouped into what

are known as bouquets on a regional or national level.

You can find the current transmission information on teletext from

various broadcasters, or look in a TV guide or on the Internet.

Special features of your digital receiver

The DTR 1760 MICRO digital receiver can receive and process

all unencrypted digital stations. This digital receiver has a built-in

digital receiver unit. The receiver unit converts the signals from

digital stations to provide outstanding audio and picture quality.

The TV guide tells you of any schedule changes at short notice, and

provides an overview of all the stations’ schedules for the next few

hours.

If the broadcaster provides it, you can call up detailed information

on each programme at the touch of a button.

This digital receiver has a very comprehensive, user-friendly menu

system.

The menu is displayed on the television screen, and the functions of

the remote control buttons are explained.

This receiver is prepared with the Digi 200 chassis for upgrading

GRUNDIG televisions.

The user guide for the receiver can be integrated into the television

user guide by following a brief installation procedure. The receiver

can be controlled with the television remote control once it is

installed. The remote control, the infra-red mouse and the power

supply for the receiver will then no longer be needed.

GENERAL INFORMATION__________________

ENGLISH

SET-UP AND SAFETY___________________________

To ensure that this high quality, easy-to-use digital receiver gives

you lasting entertainment and enjoyment, please note the following

information.

This digital receiver is designed to receive, record and play back

video and audio signals. Any other use is expressly prohibited.

When setting up the device, make sure the mains plug is easily

accessible.

If the digital receiver is subject to a sudden change in temperature,

for example when brought in from the cold to a warm room, let it

stand for at least two hours before you connect it to the mains

supply.

Do not expose the digital receiver to any moisture.

The digital receiver is designed for use in dry rooms. If you do use it

outdoors, please ensure that it is protected from moisture, such as

rain or splashing water.

Thunderstorms are a danger to all electrical devices. Even if the

digital receiver is switched off, it can be damaged by a

lightning strike to the mains or the antenna.

Always disconnect the mains and antenna plugs during a storm.

Never open the digital receiver casing under any circumstances.

Warranty claims are excluded for damage resulting from improper

handling.

Note:

Do not connect any other equipment while the device is switched

on. Switch off the other equipment as well before connecting it.

Do not plug in the power supply of your device until you have

connected the external equipment and the antenna.

Make sure the power supply is freely accessible.

°C2h

°C

ACIN

1DVI-D HDMI PC DVI

Audioin

VIDEO

ANT

IN L

AV-OUT

YPbPr

YPbPrAudioin

RPC

RFOut RFIn 12V

TV R

The digital receiver

RF Out HF output for connecting an HF cable to the antenna

socket of the television or DVD recorder.

RF In Socket for the indoor or outdoor antenna.

IR Connection socket for the infrared receiver.

12 V ÓConnection socket for the mains adapter supplied.

EURO AV Euro AV (output) plug for the television.

The infrared receiver

The infrared receiver receives the infrared signals of the remote

control and forwards the commands by wire to the receiver. Position

the infrared receiver so that it can receive the remote control

commands.

When you switch on from standby, the receiver switches to the last

selected station (Last Station Memory).

•(red) The digital receiver is in standby mode.

•(green) The digital receiver is switched on.

OVERVIEW____________________________________________

RF Out RF In 12V

ENGLISH

OVERVIEW____________________________________________

The remote control

ǼSwitches the digital receiver to standby, and from

standby to the channel last selected.

?Displays programme information.

1 … 0 Select stations.

dSwitches the sound to mute and on again.

iOpens the main menu.

ZExits the current menu level.

ǸǷ Adjust the volume.

P+ P- Switch channels up and down one by one.

OK Calls up the station list.

Press

A/B

to switch between the station list and the

favourites list.

TXT Switches from television mode to teletext mode.

TV-G Calls up the TV guide.

Switches to TV mode.

A/B

Switches between the two most recently selected

channels.

RADIO Switches to radio mode.

ȄDisplays the time.

ǷǷSwitches between mono, left mono, right mono and

stereo.

z FCalls up options (not available for all stations).

DR, TV Switches to operating a GRUNDIG digital receiver,

DVD GRUNDIG television or GRUNDIG DVD player.

Keep the appropriate button (»DR«, »TV«, »DVD«)

pressed down. Then press the appropriate button.

Note:

The functions available depend on the model of the

device you are using.

Just try it out.

Tele Pilot 766 S

DR DVD

TXT

PIP

A/B

MHP

TV-G

Radio

Connecting the antenna

1Connect the cable of the indoor or outdoor antenna to the »RF In«

socket on the digital receiver.

Note:

When connecting an indoor antenna you may have to try it out at

different positions until you get the best reception.

2Connect the »RF Out« socket of the digital receiver to the antenna

socket of the television using an HF cable (loop through function for

analogue broadcasts).

Connecting the television

1Plug the digital receiver into the corresponding Euro AV socket (e.g.

EURO-AV, SCART) of the television (use the Euro AV extension if

required).

CONNECTION AND PREPARATION

RF Out RF In 12V

TelePilot765S

AVRDVD

TXT

PIP

A/B

MHP

TV-G

Radio

AC IN

1DVI-D HDMI PC DVI

Audioin

VIDEO

ANT

IN L

AV-OU T

YPbPr

YPbPrAudio in

RPC

TV R

RF Out RF In 12V

ACIN

1DVI-D HDMI PCDVI

Audioin

VIDEO

ANT

IN L

AV-OUT

YPbPr

YPbPrAudioin

RPC

RF Out RF In 12V

ENGLISH

Connecting the infrared receiver

1Insert the plug of the infrared receiver into the »IR« socket.

Connecting the mains adapter

1Plug the plug of the mains adapter supplied into the »12 V Ó«

socket on the digital receiver.

2Plug the mains adapter into the socket.

Notes:

Only plug the device into the mains socket after you have connected the

television and the antenna.

The only way to disconnect the digital receiver from the mains supply is

to pull the plug.

Inserting batteries in the remote control

1Open the battery compartment by removing the lid.

2Insert the batteries (Mignon type, for example UM-3 or AA, 2x 1.5 V).

Observe the polarity (marked on the base of the battery compartment).

3Close the battery compartment.

Note:

If the digital receiver no longer reacts properly to remote control com-

mands, the batteries may be flat. Always remove used batteries.

The manufacturer accepts no liability for damage resulting from leaking

batteries.

Environmental note

Batteries, including those which contain no heavy metal, should not be

disposed of with household waste. Please dispose of used batteries in an

environmentally responsible manner. Find out about the legal regula-

tions which apply in your area.

CONNECTION AND PREPARATION

12V

RF Out RF In 12

The menu

This digital receiver has a very comprehensive, user-friendly menu

system. The menu is displayed on the television screen.

The digital receiver responds to many functions which you select on

the remote control with informative menus and icons on the televi-

sion screen.

It enables you to select many different settings and contains infor-

mation on using your digital receiver.

The menu contains the most important controls for your digital

receiver. Its menu system controls the dialogue between you and the

digital receiver.

Press »i« to open the main menu. Press »P-« or »P+« to navigate in

the menu and select the desired symbol. The selected symbol is

highlighted.

When you press »OK« to confirm your selection, a sub-menu

appears. Here too, you can navigate by pressing »P-« or »P+«

and select the item you want. The selected item is highlighted.

Press »OK« to confirm. Normally another menu then appears,

where you can use »P-« or »P+« to navigate and make the setting.

Make settings using »P-«, »P+«, »Ǹ« or »Ƿ«.

Press »Z« to quit the current menu level.

Press »i« to quit the menu entirely.

BASIC SETTINGS __________________________________

Tabla de contenidos

Otros manuales de Receptor de Grundig

Grundig

Grundig STR 600 AP Manual de usuario

Grundig

Grundig XENARO AVR 4300 DD Manual de usuario

Grundig

Grundig RR 740 CD Manual de usuario

Grundig

Grundig DTR 1782 VC Manual de usuario

Grundig

Grundig R 1000 DPL Manual de usuario

Grundig

Grundig STR 632 Manual de usuario

Grundig

Grundig DCR 1744 CO Manual de usuario

Grundig

Grundig DSR 5450 HD Manual de usuario

Grundig

Grundig GSTB1701USB Manual de usuario

Grundig

Grundig STR 1300 Manual de usuario

Grundig

Grundig STR 7100 Manual de usuario

Grundig

Grundig SER 300a Manual de usuario

Grundig

Grundig STR 100 DX microSAT Manual de usuario

Grundig

Grundig WR 5408 PLL Manual de usuario

Grundig

Grundig DSR 2410 Manual de usuario

Grundig

Grundig 800 MILLENNIUM Manual de usuario

Grundig

Grundig STE 1000 Manual de usuario

Grundig

Grundig STR 611 Manual de usuario

Grundig

Grundig DTR 2000 S Manual de usuario

Grundig

Grundig M 100-CF Manual de usuario

Grundig

Grundig SER 300 Manual de usuario

Grundig

Grundig STR 7122 TWIN Manual de usuario

Grundig

Grundig DSR 3735 CI Manual de usuario

Grundig

Grundig DRS 100 CL Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario