Grundfos CIM 1 Series Manual de usuario

CIM 100-110 LON module

Installation and operating instructions

GRUNDFOS INSTRUCTIONS

Table of contents

CIM 100-110 LON module

English (GB)

Installation and operating instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Deutsch (DE)

Montage- und Betriebsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Dansk (DK)

Monterings- og driftsinstruktion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Español (ES)

Instrucciones de instalación y funcionamiento . . . . . . . . . . . . . . . . . . . . . . . . . 20

Suomi (FI)

Asennus- ja käyttöohjeet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Français (FR)

Notice d'installation et de fonctionnement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Italiano (IT)

Istruzioni di installazione e funzionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Português (PT)

Instruções de instalação e funcionamento . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Русский (RU)

Паспорт, Руководство по монтажу и эксплуатации . . . . . . . . . . . . . . . . . . . 47

中文 (CN)

安装和使用说明书 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

日本語 (JP)

取扱説明書 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

한국어 (KO)

설치 및 작동 지침 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Appendix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

English (GB)

English (GB) Installation and operating instructions

Original installation and operating instructions.

CONTENTS

Page

1. Symbols used in this document

2. Applications

The CIM 1XX LON module (CIM = Communication

Interface Module) enables data transmission

between a LON network and a Grundfos product.

The CIM 1XX is fitted in the product to be

communicated with or in a CIU 1XX unit (CIU =

Communication Interface Unit).

Retrofitting of the CIM 1XX is described in the

installation and operating instructions of the

Grundfos product.

Further information

For further information about configuration and

functionality of the CIM 1XX, see the specific

functional profile on the CD-ROM supplied with the

product.

1. Symbols used in this document 5

2. Applications 5

2.1 CIM 1XX LON module 6

3. Installation 6

3.1 Connecting the LON 6

3.2 Registration in a LON network 7

4. LEDs 7

5. Fault finding 8

6. Technical data 9

7. Service 9

7.1 Service documentation 9

8. Disposal 9

Warning

Prior to installation, read these installation

and operating instructions. Installation and

operation must comply with local

regulations and accepted codes of good

practice.

Warning

If these safety instructions are not

observed, it may result in personal injury!

Caution

If these safety instructions are not

observed, it may result in malfunction or

damage to the equipment!

Note

Notes or instructions that make the job

easier and ensure safe operation.

English (GB)

2.1 CIM 1XX LON module

Fig. 1 CIM 1XX LON module

3. Installation

3.1 Connecting the LON

Grundfos recommends to use a cable according to

Echelon standards.

Examples of recommended cable types

• Belden 85102

• Belden 8471

• Level IV, 22 AWG

• JY(St) Y 2 x 2 x 0.8

• TIA Category 5.

A LON network must be terminated. The termination

depends on the network topology chosen.

Fitting the cable

Procedure:

See fig. 2.

1. Connect the conductors to terminal A (pos. 1).

2. Connect the conductors to terminal B (pos. 2).

3. Connect the twisted screen ends to terminal

"Screen" (pos. 3).

Fig. 2 Connecting the LON

TM04 1956 1508

Pos. Designation Description

1 A LON terminal A

2 B LON terminal B

3 Screen LON terminal for cable

screen

4 LED1 Yellow service LED

5 Pin Service pin (push-button)

6LED2

Red/green status LED for

internal communication

between the CIM 1XX and

the Grundfos product

123465

Warning

The CIM 1XX must only be connected to

SELV or SELV-E circuits.

Note

The screen must only be connected to the

screen terminal of the CIM 1XX LON

module. See fig. 2, pos. 3.

The cable screen must never be

connected to earth via the earth clamp.

See fig. 2, pos. 4.

Note

The stripped part of the cable screen must

be as short as possible to reduce the

impedance at high frequencies.

TM04 1957 1508

Pos. Description

1 LON terminal A

2 LON terminal B

3 LON terminal for cable screen

4Earth clamp

English (GB)

3.2 Registration in a LON network

Grundfos products with a CIM 1XX LON module are

registered by a LON network in one of these ways:

• Service pin

• Bar code label.

Service pin

When the service pin push-button of the module is

activated, the module will send a unique 48 bit ID

code (Neuron ID) which is registered in the LON

network.

Fig. 3 Service pin

Bar code label

The Neuron ID on the module or on the enclosed bar

code label is scanned and registered in the LON

network. The bar code of the Neuron ID is in Code

128 format. The additional bar code label can be

attached to the building installation plan.

4. LEDs

The CIM 1XX LON module has two LEDs. See fig. 1.

• Yellow service LED (LED1)

• Red/green status LED (LED2) for internal

communication between the CIM 1XX and the

Grundfos product.

LED1

The yellow LED on the CIM 1XX functions as a

service LED. When the Grundfos product is

connected to the power supply, the service LED will

flash once and then remain off if the installation has

been made correctly. In case of deviations, see

section 5. Fault finding.

LED2

TM04 1958 1508

Status Description

Off The CIM 1XX has been switched

off.

Flashing red No internal communication

between the CIM 1XX and the

Grundfos product.

Permanently

red The CIM 1XX does not support

the Grundfos product connected.

Permanently

green

Internal communication between

the CIM 1XX and the Grundfos

product is OK.

English (GB)

5. Fault finding

Faults in a CIM 1XX LON module can be detected by observing the status of the service LED (LED1) and the

LED for internal communication (LED2). See the table below.

CIM 1XX fitted in a Grundfos product

Fault (LED status) Possible cause Remedy

1. The service LED (LED1)

remains off when the power

supply is connected.

a) The CIM 1XX has not been

fitted correctly in the Grundfos

product.

Fit the CIM 1XX correctly in the

Grundfos product.

b) No power supply to the CIM

1XX. Check the power supply to the

Grundfos product.

c) The CIM 1XX is defective. Replace the CIM 1XX.

2. The service LED (LED1) is

permanently on. a) The CIM 1XX is defective. Replace the CIM 1XX.

3. The service LED (LED1)

flashes when the power

supply is connected to the

CIM 1XX, turns off, turns on

again and remains

permanently on.

a) The CIM 1XX has no

application software

(application-less).

Try to download application

software via a LON installation tool

such as LonMaker.

b) The CIM 1XX is defective. Replace the CIM 1XX.

4. The service LED (LED1)

flashes every second. a) The CIM 1XX has not been

installed. Install the CIM 1XX by means of a

LON installation tool such as

LonMaker.

5. The Grundfos product does

not react to changes of

settings, and the readout from

the LON network is incorrect.

The LED for internal

communication (LED2) is

permanently red.

a) The CIM 1XX does not

support the Grundfos product

connected.

Contact the nearest Grundfos

company.

b) The LON application may be

wrong, for instance CIM 110

software where CIM 100

software is required.

Download correct software via a

LON installation tool such as

LonMaker.

6. The Grundfos product does

not react to changes of

settings, and the readout from

the LON network is incorrect.

The LED for internal

communication (LED2) is

flashing red.

a) The cable between the CIM

1XX and the Grundfos product

is connected incorrectly or

damaged.

Connect the cable correctly, or

replace the cable.

English (GB)

CIM 1XX fitted in the CIU 1XX

6. Technical data

7. Service

7.1 Service documentation

Service documentation is available on

www.grundfos.com > International website >

WebCAPS > Service.

If you have any questions, please contact the

nearest Grundfos company or service workshop.

8. Disposal

This product or parts of it must be disposed of in an

environmentally sound way:

1. Use the public or private waste collection service.

2. If this is not possible, contact the nearest

Grundfos company or service workshop.

The crossed-out wheelie bin symbol on

a product means that it must be

disposed of separately from household

waste. When a product marked with this

symbol reaches its end of life, take it to a

collection point designated by the local

waste disposal authorities. The separate collection

and recycling of such products will help protect the

environment and human health.

Fault (LED status) Possible cause Remedy

1. The service LED (LED1)

remains off when the power

supply is connected.

a) No power supply to the CIU

1XX. Check the power supply to the CIU

1XX.

b) The CIM 1XX is defective. Replace the CIM 1XX.

2. The service LED (LED1) is

permanently on. a) The CIM 1XX is defective. Replace the CIM 1XX.

3. The service LED (LED1)

flashes when the power

supply is connected to the

CIM 1XX, turns off, turns on

again and remains

permanently on.

a) The CIM 1XX has no

application software

(application-less).

Try to download application

software via a LON installation tool

such as LonMaker.

b) The CIM 1XX is defective. Replace the CIM 1XX.

4. The service LED (LED1)

flashes every second. a) The CIM 1XX has not been

installed. Install the CIM 1XX by means of a

LON installation tool such as

LonMaker.

5. The Grundfos product does

not react to changes of

settings, and the readout from

the LON network is incorrect.

The LED for internal

communication (LED2) is

permanently red.

a) The CIM 1XX does not

support the Grundfos product

connected.

Contact the nearest Grundfos

company.

b) The LON application may be

wrong, for instance CIM 110

software where CIM 100

software is required.

Download correct software via a

LON installation tool such as

LonMaker.

6. The Grundfos product does

not react to changes of

settings, and the readout from

the LON network is incorrect.

The LED for internal

communication (LED2) is

flashing red.

a) The cable between the CIM

1XX and the Grundfos product

is connected incorrectly or

damaged.

Connect the cable correctly, or

replace the cable.

Note

Fault finding in a LON network requires a

special tool such as Honeywell Excelon

(not supplied by Grundfos).

Transceiver FTT 10

Cable Screened, twisted-pair,

according to Echelon

standards

Transmission speed 78 kbits/s

Protocol LonTalk

Supply voltage 5 V ± 5 %

Current consumption Max. 200 mA

Storage temperature -25 °C to +70 °C

-13 °F to +158 °F

Deutsch (DE)

Deutsch (DE) Montage- und Betriebsanleitung

INHALTSVERZEICHNIS

Seite

1. Kennzeichnung von Hinweisen

2. Verwendungszweck

Das CIM 1XX LON Modul (CIM = Communication

Interface Module (Kommunikationsschnittstellen-

modul)) ermöglicht die Datenübertragung zwischen

einem LON-Netzwerk und einem Grundfos Produkt.

Das CIM 1XX ist in dem Produkt, mit dem die Kom-

munikation erfolgt, oder in einem CIU 1XX Gerät

(CIU = Communication Interface Unit (Kommunika-

tionsschnittstellengerät)) eingebaut.

Der nachträgliche Einbau des CIM 1XX ist in der

Montage- und Betriebsanleitung des jeweiligen

Grundfos Produkts beschrieben.

Weitere Informationen

Weitere Informationen über das Konfigurieren und

die Funktionen des CIM 1XX finden Sie in dem

speziellen Funktionsprofil, das auf der mit dem

Produkt mitgelieferten CD-ROM abgelegt ist.

1. Kennzeichnung von Hinweisen 10

2. Verwendungszweck 10

2.1 CIM 1XX LON Modul 11

3. Installation 11

3.1 Anschließen des LON 11

3.2 Anmelden in einem LON-Netzwerk 12

4. LEDs 12

5. Störungsübersicht 13

6. Technische Daten 14

7. Service 14

7.1 Serviceunterlagen 14

8. Entsorgung 14

Warnung

Diese Montage- und Betriebsanleitung ent-

hält grundlegende Hinweise, die bei der

Montage und dem Betrieb der Pumpe zu

beachten sind. Sie ist daher unbedingt vor

der Montage und Inbetriebnahme vom

Monteur sorgfältig durchzulesen. Weiter-

hin sind die bestehenden nationalen Vor-

schriften zu beachten.

Warnung

Die in dieser Montage- und Betriebs-

anleitung enthaltenen Sicherheitshin-

weise, die bei Nichtbeachtung Gefährdun-

gen für Personen hervorrufen können, sind

mit dem allgemeinen Gefahrensymbol

"Sicherheitszeichen nach DIN 4844-W00"

besonders gekennzeichnet.

Achtung

Dieses Symbol finden Sie bei Sicherheits-

hinweisen, deren Nichtbeachtung Gefah-

ren für die Maschine und deren Funktionen

hervorrufen kann.

Hinweis

Hier stehen Ratschläge oder Hinweise, die

das Arbeiten erleichtern und für einen

sicheren Betrieb sorgen.

Otros manuales para CIM 1 Series

Tabla de contenidos

Idiomas:

Otros manuales de Unidad de control de Grundfos

Grundfos

Grundfos MAGNA1 D Manual

Grundfos

Grundfos CIM 1 LON Series Manual de usuario

Grundfos

Grundfos TP Manual de usuario

Grundfos

Grundfos PLV Series Manual de usuario

Grundfos

Grundfos CIM 100 Manual de usuario

Grundfos

Grundfos CU 401 Manual de usuario

Grundfos

Grundfos LC 23 Series Instrucciones de funcionamiento

Grundfos

Grundfos Unilift AP12 Manual de usuario

Grundfos

Grundfos SA Series Manual de usuario

Grundfos

Grundfos CIM 110 Manual de usuario

Grundfos

Grundfos CIM 270 Manual de usuario

Grundfos

Grundfos DID Series Manual de usuario

Grundfos

Grundfos LC 107 Manual de usuario

Grundfos

Grundfos OHJEET CIM 500 Manual de usuario

Grundfos

Grundfos Unilift AP12 Manual de usuario

Grundfos

Grundfos SCALA1 Guía de configuración rápida

Grundfos

Grundfos CIM 500 Manual de usuario

Grundfos

Grundfos DDI Series Manual de usuario

Grundfos

Grundfos PRV Series Manual de usuario

Grundfos

Grundfos KJ1 GU02 Manual de usuario

Grundfos

Grundfos CIM 500 Manual de usuario

Grundfos

Grundfos CIM 500 Manual de usuario

Grundfos

Grundfos CIM 2 Series Manual de usuario

Grundfos

Grundfos CIM 260 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario