Greenlee 560XL Manual de usuario
560XL
Fiber Optic Power Meter
570XL
850/1300 nm LED Source
580XL
1310/1550 nm Laser Source
Read and understand all of the
instructions and safety information in
this manual before operating or
servicing this tool.
INSTRUCTION MANUAL
0500-01 REV A © 2005 Greenlee Textron Inc. 8/05
Table of Contents
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Purpose of This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Model Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–10
570XL LED Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
580XL Laser Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
560XL Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–14
Battery Installation or Replacement . . . . . . . . . . . . . . . . . . . . 11–12
Auto-Shutoff Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Snap-On Connector (SOC) Interface for 580XL . . . . . . . . . . . . . . 14
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15–18
570XL LED Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
580XL Laser Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
560XL Power Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17–18
Setting the Source Modulation Frequency . . . . . . . . . . . . . . . . . . 18
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19–27
One Test Jumper Method: Connector Loss . . . . . . . . . . . . . . 19–21
Two Test Jumper Method: Link Loss . . . . . . . . . . . . . . . . . . . 22–24
Dual-Wavelength SM Loss Measurements. . . . . . . . . . . . . . . 25–27
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2
Description
The Greenlee XL fiberTOOLS™ instruments are handheld fiber optic
tools designed to measure optical power levels and link loss on multi-
mode and single-mode fiber optic cabling networks.
• The 560XL power meter measures optical power at 850 nm,
1300 nm, 1310 nm, and 1550 nm and can store reference power
levels. The snap on connector (SOC) interface adapts to FC, SC,
and ST connectors.
• The 570XL LED source provides a light source to measure insertion
loss on multi-mode fiber optic cabling. It is configured for FC, SC,
and ST connectors.
• The 580XL laser source provides a light source to measure inser-
tion loss on single-mode fiber optic cabling. It is configured for FC,
SC, and ST connectors.
Safety
Safety is essential in the use and maintenance of Greenlee tools and
equipment. This instruction manual and any markings on the tool pro-
vide information for avoiding hazards and unsafe practices related to
the use of this tool. Observe all of the safety information provided.
Purpose of This Manual
This instruction manual is intended to familiarize all personnel with the
safe operation and maintenance procedures for the Greenlee 560XL,
570XL, and 580XL fiberTOOLS instruments.
Keep this manual available to all personnel. Replacement manuals are
available upon request at no charge.
All specifications are nominal and may change as design improvements occur.
Greenlee Textron Inc. shall not be liable for damages resulting from misapplica-
tion or misuse of its products.
fiberTOOLS is a trademark of Greenlee Textron Inc.
560XL • 570XL • 580XL
3
KEEP THIS MANUAL
4
Important Safety Information
SAFETY ALERT SYMBOL
Hazards or unsafe practices which, if not avoided, MAY result
in injury or property damage.
Hazards which, if not avoided, COULD result in severe injury or
death.
Immediate hazards which, if not avoided, WILL result in severe
injury or death.
This symbol is used to call your attention to hazards or unsafe
practices which could result in an injury or property damage.
The signal word, defined below, indicates the severity of the
hazard. The message after the signal word provides informa-
tion for preventing or avoiding the hazard.
Read and understand this material before
operating or servicing this equipment.
Failure to understand how to safely operate
this tool could result in an accident causing
serious injury or death.
Important Safety Information
560XL • 570XL • 580XL
5
Electric shock hazard:
Contact with live circuits could result in
severe injury or death.
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS I LASER PRODUCT
The 580XL instrument is a laser device conforming to the require-
ments of CDRH, CFR 1040, Subchapter J. While there is no potential
for eye damage due to unaided direct exposure, users should always
avoid looking directly into the output port. The use of optical viewing
instruments, such as microscopes, magnifiers, etc., should always be
avoided. The use of such devices around active fibers can focus an
intense beam of light energy onto the retina of the eye, which can
result in permanent damage.
Laser hazard:
• When performing measurements on fiber optic systems, avoid
eye exposure to any open-ended fibers, optical connectors,
optical interfaces, or other sources because they may be con-
nected to active laser transmitters.
•Do not look into the optical port when a source is turned on.
• Avoid looking at the free end of a test fiber, i.e., the end not
connected to the instrument. If possible, direct the free end
toward a non-reflective surface.
Failure to observe these precautions may result in injury.
Important Safety Information
6
Electric shock hazard:
• Do not insert batteries with the polarity reversed. Do not mix
batteries of different manufacturers or types, e.g., alkaline and
non-alkaline.
• Do not open the case of the unit for any reason. It contains no
user-serviceable parts.
• Use this unit for the manufacturer’s intended purpose only, as
described in this manual. Any other use can impair the protec-
tion provided by the unit.
Failure to observe these precautions may result in injury and may
damage the unit.
Instrument damage hazard:
• Do not leave the unit in direct sunlight or near direct sources of
heat.
• Protect the unit from strong impacts or shock.
• Do not immerse the unit in water or store in areas with high
humidity.
•When necessary, clean the case, front panel, and rubber cover
with a damp cloth. Do not use abrasives, harsh chemicals, or
solvents.
• Replace the interface dust cap(s) when the unit is not in use.
• Store the unit and interface adapters in a cool, dry, and clean
place.
Failure to observe these precautions may result in injury and may
damage the unit.
Introduction
Model Designations
The XL fiberTOOLS instruments incorporate several different types of
interfaces and must be used with compatible adapters.
XL fiberTOOLS Individual Instruments
560XL InGaAs Optical Power Meter; requires a SOC adapter
for connector interface (see below)
570XL-FC 850/1300 nm LED Source with FC connector
570XL-SC 850/1300 nm LED Source with SC connector
570XL-ST 850/1300 nm LED Source with ST connector
580XL-FC 1310/1550 nm Laser Source with FC connector
580XL-SC 1310/1550 nm Laser Source with SC connector
580XL-ST 1310/1550 nm Laser Source with ST connector
170XL 635 nm Visual Fault Locator
Greenlee SOC Adapters
1020 FC/PC SOC Adapter
1030 SC/PC SOC Adapter
1062 ST/PC SOC Adapter
Unpacking and Inspection
All XL fiberTOOLS instruments have been carefully inspected before
shipment. When received, the shipping carton should contain the
items listed below:
•1 XL fiberTOOLS instrument
• 1 rubber boot with stand
• 1 instruction manual
• 2 AA-size alkaline batteries
•SOC adapter for power meter
Please account for and inspect each item while unpacking and
preparing the instrument for use.
If the instrument received is damaged, contact Greenlee. Refer to the
instructions under “Warranty.”
Keep the shipping carton in case re-shipment is required for any
reason, e.g., annual recalibration.
560XL • 570XL • 580XL
7
Specifications
570XL Series 850/1300 nm Dual-Wavelength
LED Sources*
Center wavelength (FWHM)
Nominal 850 nm 1300 nm
Range 840 to 880 nm 1270 to 1345 nm
Max. spectral width (FWHM) 55 nm 150 nm
Stability, 1 hour ±0.05 dB ±0.05 db
Power output,
62.5/125 µm GI MM** -13 dBm -20 dBm
Power output uncertainty ±0.5 dB ±0.5 dB
Optical connector interface FC, SC, or ST FC, SC, or ST
Functions MOD: Modulated output mode
CW: Continuous Wave output mode
FREQ: Selectable modulation
frequency
Modulation frequencies 270 Hz, 1 kHz, and 2 kHz (±0.5%)
using switch inside battery
compartment
Power requirements Two AA-size alkaline batteries
Battery life > 24 hours
Environment
Operating temperature -15 °C to 55 °C
Storage temperature -35 °C to 70 °C
Humidity, non-condensing 0% to 95%
Dimensions 7.2 x 14.2 x 3.5 cm
(2.8 x 5.6 x 1.4 in)
Weight
Single 215 g (7.6 oz)
Dual 241 g (8.5 oz)
* Within specified operating environment of 20 °C to 25 °C.
** Calibrated launch level, equilibrium modal distribution.
8
580XL Series 1310/1550 nm Dual-Wavelength
Laser Sources*
Center wavelength (FWHM)
Nominal 1310 nm 1550 nm
Range 1280 to 1340 nm 1520 to 1580 nm
Spectral width (FMS) < 5 nm < 5 nm
Stability, 24 hours
max. deviation ±0.2 dB ±0.2 db
Stability vs. temperature,
-15 °C to 55 °C** ±0.5 dB ±0.5 db
Typical power output
at 100%***† -7 dBm ±0.5 dB -7 dBm ±0.5 dB
Power output uncertainty ±0.5 dB ±0.5 dB
Optical connector interface FC, SC, or ST FC, SC, or ST
Functions MOD: Modulated output mode
CW: Continuous Wave output mode
FREQ: Selectable modulation
frequency
Modulation frequencies 270 Hz, 1 kHz, and 2 kHz (±5%)
using switch inside battery
compartment
Power requirements Two AA-size alkaline batteries
Battery life > 50 hours
Environment
Operating temperature -15 °C to 55 °C
Storage temperature -35 °C to 70 °C
Humidity, non-condensing 0% to 95%
Dimensions 7.2 x 14.2 x 3.5 cm
(2.8 x 5.6 x 1.4 in)
Weight 227 g (8 oz)
Laser Class 1
* Within specified operating environment of 20 °C to 25 °C.
** Temperature is ramped up in 5 °C steps. The instrument is allowed to
stabilize at each temperature for 10 minutes. The initial reference power is
measured at approximately 25 °C.
*** With return loss > 30 dB.
†Power is 3 dB lower in modulated mode.
560XL • 570XL • 580XL
9
560XL Series Optical Power Meters*
Detector size and
composition 1 mm InGaAs
Calibrated wavelengths 850, 1300, 1310, 1550 nm
Measurement range +3 to -60 dBm
Linearity:
+3 to -3 dBm ±0.5 dB
-3 to -50 dBm ±0.05 dB
-50 to -60 dBm ±0.5 dB
Absolute accuracy ±0.25 dB
Wavelength dependence (typical):
820 to 880 nm 2.00 dB
975 to 985 nm 0.25 dB
1270 to 1330 nm 0.30 dB
1500 to 1625 nm 0.30 dB
Polarization dependence < 0.1 dB
Resolution ±0.01dB
Optical connector interface FC, SC, or ST
Functions dB: Relative units
dBm: Absolute units
λ: Select wavelength
CAL: Calibrate unit
Power requirements Two AA-size alkaline batteries
Battery life > 100 hours
Environment
Operating temperature -15 °C to 55 °C
Storage temperature -35 °C to 70 °C
Humidity, non-condensing 0% to 95%
Dimensions 7.2 x 14.2 x 3.5 cm
(2.8 x 5.6 x 1.4 in)
Weight 250 g (8.9 oz)
* Within specified operating environment of 20 °C to 25 °C.
10
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Instrumento de medición de Greenlee
Greenlee
Greenlee AM-600T Manual de usuario
Greenlee
Greenlee HCO-100 Manual de usuario
Greenlee
Greenlee 200fp Manual de usuario
Greenlee
Greenlee CLM-1000 Manual de usuario
Greenlee
Greenlee CS-8000 Circuit Seeker Manual de usuario
Greenlee
Greenlee 93-172 Manual de usuario
Greenlee
Greenlee 5990A Manual de usuario
Greenlee
Greenlee 5990A Manual de usuario
Greenlee
Greenlee TML-30 Manual de usuario
Greenlee
Greenlee 5124 Manual de usuario
Greenlee
Greenlee BLL-200 Manual de usuario
Greenlee
Greenlee 93-172 Manual de usuario
Greenlee
Greenlee 5778 Guía
Greenlee
Greenlee 5883 Manual de usuario
Greenlee
Greenlee 200B-G Manual de usuario
Greenlee
Greenlee 93-20 Manual de usuario
Greenlee
Greenlee 180XL Manual de usuario
Greenlee
Greenlee FG01 G-Series Smart Pull Manual de usuario
Greenlee
Greenlee ANM-50 Manual de usuario
Greenlee
Greenlee TS90 TelScout Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario