GrandTec PVK-1000 Manual de usuario
1
User’s Guide
V1.0 – March 2004
GrandTec USA
2715 Electronic Lane
Dallas, TX 75220
www.Grandtec.com * 214-366-3496 * fax: 214-351-3862
2
Rev. 2 – June 2001
The information in this document is subject to change without notice.
This document contains materials protected by copyright. All rights are reserved. No part of
this manual may be reproduced or transmitted in any form, by any means or for purpose
without express written consent.
Federal Communications Radio Frequency Interference Statement.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, Pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instruction manual may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio of television
reception, which can be determined by turning the equipment off or on, the user is encouraged
to try to correct the interference by one or more of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
zConsult the dealer or an experienced radio TV technician for help.
Notice :
(1) The changes or modifications not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
(2) Shielded interface cables and AC power adapter, if any must be used in order to comply
with the emission limits.
CE DECLARATION
This device complies with CE class B.
*EN50081-2 *EN50082-1
EN55011 IEC 801-2
EN61000-3-2 IEC 801-3
EN61000-3-3 IEC 801-4
Printed in Taiwan R.O.C.
All contents are subject to change without notice.
All trademarks are the property of their respective owner.
3
CHAPTER 1
Congratulations and thank you for purchasing the PriveKey
1.1 Introduction
The PriveKey is a unique tool for enabling security and privacy of
your data and internet access. The combining of software with
hardware creates a multi-tiered level of security.
1.2 Product Features
1. Create and protect up to four partitions on a hard drive with one
PriveKey
2. Regulate and block internet access with WebLock
1.5 System Requirements
zUSB 1.1 or 2.0 port
zMicrosoft Windows 98SE/ME/2000 Professional/XP Home or
Professional
zIntel Pentium or AMD Duron/Athlon compatible processor
zSupports FAT/FAT16/FAT32/NTFS
zCD-ROM Drive
zMicrosoft Internet Explorer 6.0 or later
1.6 Package Contents
This package contains the following items:
1. PriveKey
2. CD-ROM
3. User‘s Manual
4
CHAPTER 2
Installing the PriveKey
2.1 Connecting the Hardware
1. Plug the PriveKey directly into an available USB port. It is
not recommended that the PriveKey be used with a USB hub
and, in some cases, will not work at all with a hub.
2. Your operating system should automatically detect the
presence of the PriveKey as new hardware.
3. The “Found New Hardware Wizard” will launch.
4. Select the second option, “Install from a list or specific
location (Advanced). Click “Next” to continue.
5. Insert the CD-ROM that was included with the PriveKey.
Browse to the CD-ROM contents and select the driver:
TSUsbKey.inf. Follow the remaining instructions given by
the Wizard to complete the installation.
5
2.2 Entering the ID KEY and PASSWORD
1. Upon successfully installing the driver, a Window will appear
prompting you to enter the ID KEY and PASSWORD. Enter
the ID KEY precisely as printed on the CD-ROM. A password
is not required, but is recommended as it adds to the security
of the product.
NOTE: It is essential that you keep a record of your ID KEY and
PASSWORD. If you lose the hardware, you MUST have BOTH
the ID KEY and PASSWORD to retrieve your hidden data.
2. Enter the ID KEY precisely as printed on the included
CD-ROM. Create your own unique password.
2.3 Installing the PriveKey Application
1. Insert the CD-ROM that was included with the PriveKey.
Browse to the CD-ROM contents and run SETUP.EXE
2. Follow the instructions in the Installation Wizard to
complete the installation.
6
Chapter 3
Using the PriveKey to create and use a Virtual Drive
3.1 Creating a partition
1. To access the PriveKey setup window, click on the icon in
the system tray:
2. The main PriveKey setup window opens.
3. To create a partition, click on “Add”. The “Drive Setting”
window opens.
7
4. Select the letter of the drive you wish to create.
5. Select the size of the drive you wish to create.
a. If using Windows 98SE/ME, you may create a
partition of up to 2GB.
b. If using Windows 2000/XP, you may create a partition
of up to 4GB.
c. Using one PriveKey, you may create up to four
separate partitions.
6. Choose the Storage Drive to use as the source of the
partition’s space. The Free Space indicates how much space
is available on the Storage Drive.
7. Create an Image Name to establish the name of the drive.
8. Click OK to establish the partition.
9. Once established, the drive will only be viewable and
available when the PriveKey is connected. With the PriveKey
removed, the drive is invisible and unavailable.
8
3.2 Formatting the Drive
1. Prior to copying data to the new drive, you must first format
it.
2. Browse your computer to view the available drives.
3. Double-click the drive letter that represents the PriveKey
partition.
4. You will be prompted to format the drive. Follow the
formatting instructions to complete the process.
5. Once formatted, you will be able to add and remove data to
the drive whenever the PriveKey is connected to the PC.
3.3 Backing up a Partition
1. To create a backup image of the partition, highlight the drive
from the main setup window and click “Modify”.
2. From the “Drive Setting” window, click “Backup” and choose
the path and file name for your backup image.
Note: It is recommended that you backup your data to a
removable media source, such as a CD-R, for safe keeping.
The *.img file cannot be accessed without the
corresponding PriveKey, ID KEY and PASSWORD.
3.4 Restoring a Partition
1. To restore a drive image that may have been deleted or
otherwise corrupted, you must have the PriveKey connected.
2. From the main setup window, click “Add”.
3. From the “Drive Setting” window, click “Restore” and choose
the *.img file for the drive you wish to restore.
9
Chapter 4
Using the WebLock
4.1 Enabling WebLock
1. From the main setup window, click “Option”.
2. Click the box for WebLock to enable the feature.
3. With the PriveKey connected Internet Explorer v6.0 or later
may be used to access the internet. With the PriveKey not
connected, Internet Explorer may not be used to connect to
the internet.
Note: The WebLock features requires Microsoft Internet
Explorer v6.0 or later. It does not work with any other
browser or configuration.
Chapter 5
Trouble-shooting
5.1 The PriveKey does not install properly
1. From the Control Panel, click on the System icon to access
the
2. Device Manager.
3. If installed properly you should see a listing for the USB
Virtual Hard Disk Key.
10
4. If the listing shows any errors, you may update the driver.
Access the Update Driver Wizard by double-clicking on the
device to access the device properties. Click on the button
that says “Update Driver”
5. Select the second option, “Install from a list or specific
location (Advanced). Click “Next” to continue.
6. Insert the CD-ROM that was included with the PriveKey.
Browse to the CD-ROM contents and select the driver:
TSUsbKey.inf. Follow the remaining instructions given by the
Wizard to complete the installation.
5.1 I have lost the PriveKey! What do I do to retrieve my data?
1. You can purchase a new PriveKey. To purchase a
replacement key, you may visit your local retailer or visit us
online @ www.GrandTec.com. During the check-out
process, enter the coupon code: newkey. The coupon code
is good for 25% off the regular price.
2. When first connected, you will be prompted for the ID KEY
and PASSWORD. Enter the ID KEY and PASSWORD for
the PriveKey that was lost.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Software de otras marcas
PS Audio
PS Audio PowerPlay Manual del propietario
Brady
Brady LOCKOUT PRO 3.0 Manual de servicio
Avaya
Avaya Interaction Center Manual de usuario
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manual
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario
Oracle
Oracle Application 9i Manual de usuario
Acer
Acer RDM Manual de usuario
Canon
Canon Vixia HF21 Manual de usuario
Canon
Canon ZR950 Manual de usuario
Samsung
Samsung Auto Backup Manual de usuario
Polycom
Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manual de usuario