Goldmund TELOS 1000 NextGen Manual de usuario

USER MANUAL

GOLDMUND TELOS 1000 NextGen

Universal Power Amplifier

Thank you for purchasing the GOLDMUND TELOS 1000 NextGen.

You have acquired the best Universal Power Amplifier ever made for professional and

domestic uses.

Please take some time to read this manual. It will provide you with useful information to

make your pleasure of listening to the TELOS 1000 NextGen even higher.

NTRODUCT ON

GOLDMUND TELOS 1000 NextGen Universal Power Amplifier

Goldmund was founded in 1978 and has ever since been dedicated to the accurate

reproduction of sound and image.

At Goldmund, we strive to lead in the creation, development and manufacture of the

industry’s most advanced technologies, including audio and video systems, home -

networking and music distribution.

The guiding principle at Goldmund is to produce a precise sound with the least possible

loss of quality through the different stages. Goldmund will never adopt a technology before

it is sufficiently developed to satisfy the high quality standards we set. This is why

Goldmund has often rejected mainstream technologies and developed its own.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 3

Table of Contents

1 SETT NG UP THE TELOS 1000 NEXTGEN 5

1.1 PREL M NAR ES 5

1.2 UNPACK NG 5

1.3 AMPL F ER LOCAT ON & COOL NG 6

1.4 L NE VOLTAGE ADJUSTMENTS 7

2CONNECT ONS 8

3AMPL F ER CONTROLS 9

3.1 MANUAL OPERAT ON 9

3.2 NPUT SELECT ON 10

4 SOUND QUAL TY OPT M ZAT ON 11

5MA NTENANCE 12

6TECHN CAL SPEC F CAT ONS 13

GOLDMUND T1000 NextGen - Universal Power Amplifier - 4

W A R N N G

No connection or manipulation must be done

before reading these instructions. Damage to

the amplifier may result if the following

instructions are not consciously understood

and applied.

These extremely high quality amplifiers

possess new technical features which are a

necessity for accurate sound reproduction in

the best audio systems.

Only careful installation and use can provide

the satisfaction you are expecting.

The installation instructions must be carried

out in full and the mentioned precautions

taken to get the expected result and to avoid

impairing the amplifier’s performance.

MPORTANT

PLEASE DO NOT CONNECT ANY CABLES

OR MOVE ANY PARTS BEFORE READING

THE FOLLOWING INSTRUCTIONS.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 5

SETT NG UP THE TELOS 1000 NEXTGEN

1.1 PREL M NAR ES

Please read the following instructions very carefully. This high-precision unit will provide the

best signal possible to your speaker thanks to its unique technology.

For exacting technicians, musicians, and all high-fidelity music purists who demand the

very best in musical reproduction, we strongly recommend the use of top quality analog

pre-amplifier or acoustic processor such as the Mimesis 22H or Mimesis 32.5 with analog

or digital input.

The connection between the analog and digital sources and the acoustic processor as well

as between the pre-amplifier and the power amplifiers are critical. Ultra low reflection

interconnect cables are absolutely mandatory in analog and precise impedance SPDIF

cables in digital to keep the time integrity that the acoustic processor is designed to

provide. In all typical cases Goldmund recommends using the special Goldmund Lineal

interconnect and digital cables.

1.2 UNPACK NG

You will find in the GOLDMUND TELOS 1000 NextGen box:

- The amplifier

- The power cord

- This manual

Unpack the above-mentioned parts carefully, keep all packaging for future use.

WARN NG

If you need to return the TELOS 1000

NEXTGEN to the factory or to your local

representative for a warranty repair; please

note that it must be repacked in the

original packaging.

This packaging has been designed specifically

to protect your TELOS 1000 NEXTGEN in

transit. Use of alternative packaging is likely to

result in damage, invalidating warranty cover.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 6

SETT NG UP THE TELOS 1000 NEXTGEN (Ctd.)

1.3 AMPL F ER LOCAT ON & COOL NG

The GOLDMUND TELOS 1000 NextGen amplifier, as all high quality amplifiers generates

a significant amount of heat when driven at high levels and must be vented properly. It is

mandatory to allow a proper cooling of the heat sinks. Do not put temperature sensitive

equipment on top of the amplifier.

Due to its weight, and to maximize the effect of the built-in "Mechanical Grounding"

construction, the TELOS 1000 NextGen is better located on the floor. Other very strong

supports can be used if they offer rigid transmission to the floor.

The TELOS 1000 NextGen is built on four very hard conical feet to ensure proper vibration

transmission to the amplifier support. This evacuates all detrimental vibrations inside the

amplifier, following the famous GOLDMUND "Mechanical Grounding" principle.

If you use more than one TELOS 1000 NextGen at any location, you may decide to stack

them. Be careful that the conical feet of the top amp are inserted properly on the top of the

steel bars of the amplifier located below. You may stack up to 3 amps provided extra care

is taken to ensure proper air circulation vents the rear heat-sinks.

Depending on the flatness of the surface where the amplifier will be located, you will adjust

the four round flat feet of the amplifier to allow full contact of the points with the support.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 7

SETT NG UP THE TELOS 1000 NEXTGEN (Ctd.)

1.4 L NE VOLTAGE ADJUSTMENTS

A voltage selector is provided inside the amplifier.

If your line voltage is not adapted to the voltage indicated on the serial plate of the

amplifier, please consult your local GOLDMUND dealer for internal adjustment.

ATTENT ON

On the 220V position, the GOLDMUND TELOS 1000 NextGen amplifier will function

properly for main line voltage between 211V and 257V. On the 110V position, the main line

must deliver between 105 and 129V. If your main line is usually out of these tolerances,

please consult your GOLDMUND dealer.

Please check the value of the main line fuse. This fuse is located on the back panel of the

amplifier, above the two power cord receptacles.

Use a 4A delayed fuse for 220V area and 8A delayed fuse for 110V area.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 8

2 CONNECT ONS

Connect the power cord to the back of the amplifier and plug it into the nearest wall plug.

Use only a 3 lugs grounded plug, for safety reasons. To get the best sound from the

amplifier, avoid any multiple plug or extension cord.

If used with an analog signal, connect the interconnect between the preamp and each

power amp and set the TELOS 1000 NextGen in analog mode. You may either use the

RCA female socket or the XLR. The XLR socket, especially useful in professional

installations, is wired as follows:

1. Grounding, Shielding

2. Hot

3. Cold

ATTENT ON

If you want to use a symmetrical 4 wire cable, never maintain the ground/earth

switch to "Float" or you may damage your amplifier.

When used with a digital input signal, connect the digital input cable to the digital input and

switch the amplifier into the digital mode. Since a digital Spdif cable carries 2 channels you

may link the digital output to the next amplifier to transfer the second channel.

Connect the speaker cable to one of the red and black terminals in the back of the

amplifier, or, if you use a Goldmund High Definition speaker cable, you can connect directly

from the speaker cable to one of the coaxial plugs on the back panel of the amplifier,

bypassing the amplifier adapter module of the speaker cable.

The 2 separate outputs (both 5 way post and coaxial) are connected internally in parallel.

They are provided to facilitate the connection in bi-wiring systems.

You may notice that the ground of the input plug and the black speaker terminal are the

same polarity. The amplifier is non-inverting in phase.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 9

3 AMPL F ER CONTROLS

3.1 MANUAL OPERAT ON

On the front plate of the GOLDMUND TELOS 1000 NextGen amplifier you will find only two

POWER keys.

The two POWER keys have to be activated simultaneously to power the amplifier on.

This security feature is provided to avoid accidental POWER ON or POWER OFF.

As soon as the amplifier is connected to mains power, the orange indicator on the front

panel will blink briefly every 3 seconds.

Push both buttons of the front panel simultaneously in order to turn on the amplifier.

As soon as the amplifier is fully powered the green indicator will light steadily and the menu

will be displayed.

If the digital input is not used, the orange led is off, showing there is no lock and the

amplifier remains muted until a lock is found. The led will turn on as soon as the TELOS

1000 NextGen receives a digital input.

In analog mode (XLR & RCA) the orange led is always on.

By pressing the right key once, the amplifier is put in Operate mode “Unmute”, by pressing

the right key once again, the amplifier returns to the menu “Muted” state.

The amp may be POWERED OFF by pressing the two POWER keys simultaneously at

anytime.

Power On Process:

•Progressive charge of high power

capacitors to limit peak current on

AC line.

•Switch on high power supply on

output stage.

•Wait stabilization of high power

supply.

Power Off Process:

•Push both buttons simultaneously

in order to turn off the amplifier.

•As soon as the amplifier's

capacitor bank is fully discharged

the yellow indicator will blink briefly

every 3 seconds.

GOLDMUND T1000 NextGen - Universal Power Amplifier - 10

3 AMPL F ER CONTROLS (Ctd.)

3.2 NPUT SELECT ON

The menu is only available from the main screen when the amplifier is muted.

Use the left button (2) to enter the menu and cycle through the menu items.

Once the wanted menu item is shown on the screen, push the right button (1) to cycle

through the available settings of the given item.

Once the wanted setting is chosen, push the left button (2) to confirm your choice.

Push the left button again to continue to the next menu item or get back to the main

screen.

- Button 1: to navigate into the menu to select the digital left/right, analog input (RCA &

XLR) and brightness adjustment.

- Button 2: to select the input and mute/unmute the amplifier

On the input selection menu, one press on the button 2 moves the Input selection to the

right as follow:

Otros manuales para TELOS 1000 NextGen

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Amplificador de Goldmund

Goldmund

Goldmund MIMESIS 28 Manual de usuario

Goldmund

Goldmund MIMESIS 29M Millennium Edition Manual de usuario

Goldmund

Goldmund SR2.3 Manual de usuario

Goldmund

Goldmund TELOS 2500 Manual de usuario

Goldmund

Goldmund GOLDCUBE Manual de usuario

Goldmund

Goldmund TELOS 400 Manual de usuario

Goldmund

Goldmund MIMESIS 30 Manual de usuario

Goldmund

Goldmund Metis 7 Manual de usuario

Goldmund

Goldmund TELOS 350 Manual de usuario

Goldmund

Goldmund SRI2 Manual de usuario

Goldmund

Goldmund METIS 2 Manual de usuario

Goldmund

Goldmund TELOS 280 Manual de usuario

Goldmund

Goldmund THA2 Manual de usuario

Goldmund

Goldmund Mimesis PH2 Manual de usuario

Goldmund

Goldmund MIMESIS 27.5 Manual de usuario

Goldmund

Goldmund SRM250 Manual de usuario

Goldmund

Goldmund TELOS 500 Manual de usuario

Goldmund

Goldmund TELOS 352 Manual de usuario

Goldmund

Goldmund TELOS 1000 NextGen Manual de usuario

Goldmund

Goldmund TELOS 250 Manual de usuario

Goldmund

Goldmund TELOS 390 Manual de usuario

Goldmund

Goldmund MIMESIS 37S Manual de usuario

Goldmund

Goldmund MIMESIS 29.4M MILLENNIUM EDITION Manual de usuario

Goldmund

Goldmund PH3.8 Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario