Goblin urukay Manual de usuario
Goblin URUKAY Manual
Release 1.0 - October 2014
SAB HELI DIVISION
Via San Crispino N. 47
47030 San Mauro Pascoli (FC) ITALY
WORLD DISTRIBUTION
www.goblin-helicopter.com
For sales inquiries, please email:
For info inquiries, please email:
Attention: If you are a consumer and have questions or need of assistance,
please contact in a first time the Goblin retailer where you made the purchase
EUROPEAN DISTRIBUTION
www.sabitaly.it
For sales inquiries, please email:
For info inquiries, please email:
Attention: If you are a consumer and have questions or need of assistance,
please contact in a first time the Goblin retailer where you made the purchase
7 – Assembling The Modules
8 – Installation of Swashplate Servos
9 – Installation of The ESC
10 – Installation of Flybarless Unit and RX
11 – Installation of The Motor
12 – Tail Assembly
1 – Specifications
2 – Important Notes
3 – Components and Box
4 – Carbon frame Assembly
5 – Trasmission Assembly
6 – Main Rotor HPS2/HPS3
INDEX
13 – Installation of the Boom, Canopy
14 – Battery
15 – In flight
16 – Maintenance
17 – Exploded Views
18 – Spare Parts
//www.goblin-helicopter.com
http:
1648 - 1680 mm
394 mm
1440 mm
155 mm
SPECIFICATIONS
It is extremely important that you take a moment to register your helicopter with us. This is the only way to ensure that you are
properly informed about changes to your kit, such as upgrades, retrofits and other important developments. SAB Heli Division
cannot be held responsible for issues arising with your model and will not provide support unless you register your serial
number.
To mount the serial number tag on your helicopter, please refer to page 32.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
The Goblin Competition
is the result of all the feedback and experienced gained with the original Goblin.
All the changes incorporated into the Goblin Competition create a model even more reliable and efficient than ever before.
New colors, new composite materials and many upgrades are included in this kit making it the best Goblin ever.
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site www.goblin-helicopter.com for updates and other important information.
VERY IMPORTANT
Inside Box 6, you will find Bag 21. This bag contains your serial number tag. Please take a moment to register your kit online
via our web site at:
Main rotor diameter:
* HPS3, 3 Blade main rotor: 1648mm with 730mm blades.
* HPS2, 2 Blade main rotor: 1680mm with 750mm blades.
Main blade length: up to 750mm
Tail rotor diameter: 304mm
Tail blade length: 115mm
Main shaft diameter: 12mm
Tail shaft diameter: 6mm
Spindle diameter: 10mm
Motor size: Maximum 64mm diameter, maximum height 64mm
Battery compartment: 60x58x350mm (adaptable to 75x58x350mm)
Page 1
Chapter 1, Specifications
IMPORTANT NOTES
*This radio controlled helicopter is not a toy.
*This radio controlled helicopter can be very dangerous.
*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.
*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information
to correctly assemble the model. It is necessary to carefully follow all the instructions.
*Inexperienced pilots must be monitored by expert pilots.
*All operators must wear safety glasses and take appropriate safety precautions.
*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize
the possibility of accidents or of injury to property or persons.
*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very
dangerous.
*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.
*
Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product.
Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to release SAB Heli Division from
any responsibility or liability arising from the use of this product.
SAFETY GUIDELINES
*Fly only in areas dedicated to the use of model helicopters.
*Follow all control procedures for the radio frequency system.
*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.
*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.
*Never fly in the vicinity of other people.
NOTES FOR ASSEMBLY
Please refer to this manual for assembly instructions for this model.
Follow the order of assembly indicated. The instructions are divided into chapters, which are structured in a way that
each step is based on the work done in the previous step. Changing the order of assembly may result in additional or
unnecessary steps.
Use thread lockers and retaining compounds as indicated. In general, each bolt or screw that engages with a metal part
requires thread lock.
It is necessary to pay attention to the symbols listed below:
Important
Use retaining
compound
(eg Loctite 648)
Use retaining
compound
(eg Loctite 243)
Use CA Glue
Use Proper
Lubricant
Indicates that for this
assembly phase you need
materials that are in bag xx.
Bag xx
Page 2
Chapter 2, Important Notes
ADDITIONAL COMPONENTS REQUIRED
*Electric Motor: 400 - 560Kv
Maximum diameter 64mm,
Maximum height 64mm,
Pinion shaft diameter 6/8mm
*Speed controller: minimum 120A , suggest 160A
*Batteries: 12S-5000 mAh
*1 flybarless 3 axis control unit
*Radio power system, if not integrated with the ESC
*3 cyclic servos
*1 tail rotor servo
*6 channel radio control system on 2.4 GHz
(See configuration examples on page 18)
The assembly process is described in the following chapters.
Each chapter provides you with the box, bag and/or foam
tray numbers you will need for that chapter. The information
is printed in a green box in the upper right hand corner of the
page at the beginning of every chapter.
TOOLS, LUBRICANTS, ADHESIVES
*Generic pliers
*Hexagonal driver, size 1.5,2,2.5,3,4mm
*4mm T-Wrench
*5.5mm Socket wrench (for M3 nuts)
*8mm Hex fork wrench (for M5 nuts)
*Medium threadlocker (eg. Loctite 243)
*Strong retaining compound (eg. Loctite 648)
*Spray lubricant (eg. Try-Flow Oil)
*Grease ( eg. Microlube GL261 )
*Cyanoacrylate adhesive
*Pitch Gauge (for set-up)
*Soldering equipment (for motor wiring)
Inside the main box:
Box 2: Canopy, Blade Holder, Carbon parts.
Box 3: Boom,Carbon rod.
Box 4: Mechanical parts in 4 trays:
Tray 1: Main rotor.
Tray 2: Carbon frame and tail rotor.
Tray 3: Transmission.
Tray 4: Main structure.
Box 5: Bags, Blades.
Box 6: Bags, Tail Blades.
Inside the main box there are:
Page 3
Chapter 3, Components and Box
4-Carbon Frame
The manufacturing process of the carbon parts
often leaves micro-burrs and sharp edges. We
recommend de-burring the edges to minimize the
risks of electrical wire cuts, etc. Very important in
red line zone.
Page 4
Chapter 4, Carbon Frame
Frame Spacer
(H0003-S)
......x10
Flat Head Cap Screw M2.5x5mm
Flat Head Cap Screw
M2.5x5mm
(HC128-S)
Stop Battery Plate
(H0150-S)
Socket Head Cap Screw
M2.5x8mm
(HC020-S)
Flat Head Cap Screw
M2.5x5mm
(HC128-S)
ESC Support
(H0153-S)
Flat Head Cap Screw
M2.5x5mm
(HC128-S)
Flat Head Cap Screw
M2.5x5mm
(HC128-S)
Flat Head Cap Screw
M2.5x5mm
(HC128-S)
Battery Tray
(H0002-S)
Socket Head Cap Screw M2.5x8mm
......x2
Battery Tray Assembly
Note:
Bag 1.1
Page 5
Chapter 4, Carbon Frame
Frame Spacer
(H0003-S)
Socket Head Cap
Screw M3x10mm
(HC056-S)
Finishing
Washer M3
(H0007-S)
Battery Tray
Assembly
Main Frame
(H0445-S)
Tail Servo Support
(H0436-S)
Socket Head Cap
Screw M3x10mm
(HC056-S)
Finishing
Washer M3
(H0007-S)
Finishing
Washer M2.5
(H0255-S)
Left Main Frame Assembly
Cable Pass
(HA010-S)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Canopy
Positioners
(HA106-S)
Washer
3,2x
6x0,5
(HC180-S)
Bag 1.2
Font Position for Battery Support
( Light Batteries < 1500-1600g )
Back Position for Battery Support
( Heavy Batteries > 1600-1700g )
Page 6
Chapter 4, Carbon Frame
Bag 1.2
Socket Head Cap
Screw M3x10mm
(HC056-S)
Finishing Washer M3
..... x4
Socket Head Cap Screw M3x10mm
..... x4
Socket Head Cap
Screw M3x10mm
(HC056-S)
Canopy Positioner
(HA106-S)
Finishing
Washer M3
(H0007-S)
Main Frame
(H0445-S)
Left Main Frame
Assembly
Washer
Ø3,2xØ6x0.5mm
(HC180-S)
Page 7
Chapter 4, Carbon Frame
Note:
You can use Super Glue for block
the nuts in correct position
Note:
Use the lower hole
Socket Head Cap
Screw M3x16mm
(HC068-S)
Finishing
Washer M3
(H0007-S)
Finishing
Washer M3
(H0007-S)
Socket Head Cap
Screw M3x16mm
(HC068-S)
Finishing
Washer M3
(H0007-S)
Socket Head Cap
Screw M3x12mm
(HC062-S)
Socket Head Cap
Screw M3x12mm
(HC062-S)
Finishing Washer M3
Socket Head Cap Screw M3x12mm
Metric Hex
Nylon Nut M3
(HC206-S)
Socket Head Cap Screw M3x10mm
.....x4
.....x4
.....x8
.....x8
Carbon Landing Gear
(H0446-S)
Finishing
Washer M3
(H0007-S)
Socket Head Cap
Screw M3x16mm
(HC068-S)
Finishing
Washer M3
(H0007-S)
Socket Head Cap
Screw M3x16mm
(HC068-S)
Finishing
Washer M3
(H0007-S)
Landing Gear
Support
(H0344-S)
Bag 2
Chapter 4, Carbon Frame
Page 8
Tabla de contenidos
Otros manuales de Juguete de Goblin
Goblin
Goblin SPEED Manual de usuario
Goblin
Goblin 420 Manual de usuario
Goblin
Goblin Goblin Comet Manual de usuario
Goblin
Goblin Urukay Competition Manual de usuario
Goblin
Goblin 380 KYLE STACY EDITION Manual de usuario
Goblin
Goblin 500S Manual de usuario
Goblin
Goblin MINI COMET Manual de usuario
Goblin
Goblin Goblin 770 Sport Manual de usuario
Goblin
Goblin FIREBALL Manual de usuario
Goblin
Goblin SG651 Manual de usuario
