Gigabyte GA-N3050N GSM PLUS Manual de usuario

GA-N3050N GSM PLUS

User's Manual

Rev. 1001

12ME0-N30500-00R

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE's website.

Motherboard

GA-N3050N GSM PLUS

Aug. 25, 2015

Motherboard

GA-N3050N GSM PLUS

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by

any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: http://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0" means the

revision of the motherboard is 1.0. Check your motherboard revision before updating motherboard BIOS,

drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

GA-N3050N GSM PLUS Motherboard Layout ................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions.................................................................................... 5

1-2 Product Specications...................................................................................... 6

1-3 Installing the Memory....................................................................................... 8

1-4 Installing an Expansion Card ........................................................................... 8

1-5 Back Panel Connectors.................................................................................... 8

1-6 Internal Connectors........................................................................................ 10

Chapter 2 BIOS Setup ..................................................................................................20

2-1 Main ............................................................................................................... 21

2-2 Advanced ....................................................................................................... 23

2-3 Chipset........................................................................................................... 26

2-4 Security .......................................................................................................... 27

2-5 Boot................................................................................................................ 28

2-6 Save & Exit..................................................................................................... 29

Chapter 3 Appendix ......................................................................................................30

Drivers Installation..................................................................................................... 30

Regulatory Statements.............................................................................................. 31

Contact Us ................................................................................................................ 36

- 4 -

GA-N3050N GSM PLUS Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-N3050N GSM PLUS motherboard 5One SATA power cable

5Motherboard driver disk 5Two SATA cables

5User's Manual 5I/O Shield

DC_IN

LPT

GA-N3050N GSM PLUS

AUDIO

ATX_4

Intel®Braswell SoC

N3050

F_AUDIO

BIOS

R_USB

PCIE1X

CODEC M2_M

BKL_CN

COM1

VGA

F_USB1

FUSB3_1

iTE®

Super I/O

SYS_FAN

LVDS

SODIMM1

MIN_PCIE

USB30_LAN1

CLR_CMOS

SATAIII_0

SATAPW_1

JRS5

SODIMM2

CPU_FAN

LPC_TPM

F_PANEL

COM3COM4COM5COM6

SATAIII_1

COM2

HDMI

BAT

JRS4 JCOM1

JRS3

JRS2

JRS1

BAT_CON

Realtek®GbE

LAN (Note)

(Note) This chip is on the back of the motherboard.

- 5 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

CPU Built in with an Intel®Dual-Core Celeron®N3050 SoC (1.6 GHz)

* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage

to these components.

TDP 6W

L1/L2 varies with CPU

Memory 2 x DDR3L DIMM sockets supporting up to 8 GB of system memory

* If only one memory module is to be installed, be sure to install it in the SODIMM1

socket.

Dual channel memory architecture

Support for DDR3L 1333/1600 MHz memory modules

* Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded

to 1066 MHz.

Support for non-ECC memory modules

Onboard

Graphics

Integrated in the SoC:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

- 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz

Audio Realtek®ALC269 codec

High Denition Audio

2-channel

LAN Realtek®RTL8111HS GbE LAN chip (10/100/1000 Mbit)

Expansion Slots 1 x PCI Express x1 slot

1 x Mini PCIe slot (half size) (MIN_PCIE)

(The PCI Express slots conform to PCI Express 2.0 standard.)

Storage Interface Integrated in the SoC:

- 2 x SATA 6Gb/s connectors

* The M.2 slot shares bandwidth with the SATAIII_1 connector. The SATAIII_1 connector

becomes unavailable when an M.2 SSD is installed.

1 x M.2 slot (B/M key, type 2242 SATA and PCIe x1 SSD support) (M2_M)

USB Integrated in the SoC:

- 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

Internal

Connectors

1 x 4-pin ATX 12V power connector

1 x CPU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

2 x SATA 6Gb/s connectors

1 x M.2 slot

1 x SATA power connector

1 x battery cable header

1 x USB 3.0/2.0 header

1 x USB 2.0/1.1 header

- 7 -

Internal

Connectors

1 x Trusted Platform Module (TPM) header

4 x serial port headers

1 x COM1 function select jumper

1 x parallel port header

1 x LVDS header

1 x LCD inverter connector

1 x Clear CMOS jumper

Back Panel

Connectors

1 x DC In power connector

2 x serial ports

1 x D-Sub port

1 x HDMI port

4 x USB 2.0/1.1 ports

2 x USB 3.0/2.0 ports

1 x RJ-45 port

3 x audio jacks (Line In, Line Out, Mic In)

I/O Controller iTE®I/O Controller Chip

Hardware

Monitor

System voltage detection

CPU/System temperature detection

CPU/System fan fail warning

CPU/System fan speed detection

CPU/System fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 1 x 64 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Operating

System

Support for Windows 10 32-bit/64-bit

Support for Windows 8.1/7 64-bit

* Please download the "Windows USB Installation Tool" from GIGABYTE's website

and install it before installing Windows 7.

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.

Please visit GIGABYTE's website for the memory support list.

- 8 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory is

installed, the BIOS will automatically detect the specications and capacity of the memory.

The two memory sockets are divided into two channels as following:

Channel A: SODIMM1

Channel B: SODIMM2

Due to SoC limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. If only one memory module is to be installed, be sure to install it in the SODIMM1 socket, and Dual

Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of

the same capacity, brand, speed, and chips be used for optimum performance.

1-5 Back Panel Connectors

DC In Power Connector

Connect the DC power to this jack.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports D-Sub

connection to this port.

- 9 -

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

HDMI Port

The HDMI port is HDCP compliant and supports Dolby True HD and DTS HD

Master Audio formats. You can use this port to connect your HDMI-supported

monitor. The maximum supported resolution is 3840x2160@30 Hz, but the actual resolutions supported

are dependent on the monitor being used.

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

•When removing the cable connected to a back panel connector, rst remove the cable from your

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system.)

USB 3.0/2.0 Port

The USB 3.0 port supports the USB 3.0 specication and is compatible to the USB 2.0/1.1 specication.

Use this port for USB devices.

Line In (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out (Green)

The line out jack. Use this audio jack for a headphone or 2-channel speaker.

Mic In (Pink)

The Mic in jack.

DualDisplayCongurationsfortheOnboardGraphics:

Dual-display congurations are supported after you install motherboard drivers in OS, but not during the

BIOS Setup or POST process.

- 10 -

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1) ATX_4

2) DC_IN

3) CPU_FAN

4) SYS_FAN

5) SATAIII_0/1

6) SATAPW_1

7) BAT

8) BAT_CON

9) F_PANEL

10) FUSB3_1

11) F_USB1

12) LVDS

13) BKL_CN

14) JRS5

15) F_AUDIO

16) LPT

17) COM3/4/5/6

18) JRS4/JRS3/JRS2/JRS1

19) JCOM1

20) LPC_TPM

21) CLR_CMOS

1 135

1-6 Internal Connectors

171121

6 12 14

Tabla de contenidos

Otros manuales de Placa madre de Gigabyte

Gigabyte

Gigabyte A520M H Manual de usuario

Gigabyte

Gigabyte GA-P67A-UD3R-B3 Manual de usuario

Gigabyte

Gigabyte GA-K8N51PVM9-RH Manual de usuario

Gigabyte

Gigabyte B550M AORUS ELITE Manual de usuario

Gigabyte

Gigabyte GA-6JIEV2-RH Manual de usuario

Gigabyte

Gigabyte G-MAX Flex ATX Series Manual de usuario

Gigabyte

Gigabyte GA-6WMM7 Manual de usuario

Gigabyte

Gigabyte B550M AORUS PRO AX Manual de usuario

Gigabyte

Gigabyte GA-8TRS300M Manual de usuario

Gigabyte

Gigabyte H510M K Manual de usuario

Gigabyte

Gigabyte 6VMA Manual de usuario

Gigabyte

Gigabyte GA-H61M-S2PT Manual de usuario

Gigabyte

Gigabyte GA-Z170-Gaming K3 Manual de usuario

Gigabyte

Gigabyte GA-6IWFE Manual de usuario

Gigabyte

Gigabyte GA-Z87-D3H Manual de usuario

Gigabyte

Gigabyte GA-7PESH4 Manual de usuario

Gigabyte

Gigabyte GA-M52L-S3 Manual de usuario

Gigabyte

Gigabyte GA-H110M-H DDR3 Manual de usuario

Gigabyte

Gigabyte GA-G41M-ES2H Manual de usuario

Gigabyte

Gigabyte TRX50 AERO D Manual de usuario

Gigabyte

Gigabyte GA-870A-UD3 Manual de usuario

Gigabyte

Gigabyte MNIC8PI Manual de usuario

Gigabyte

Gigabyte B760 GAMING X AX Manual de usuario

Gigabyte

Gigabyte GA-8IRM Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario