Gentec SMARTEC PLUS Manual de usuario

INSTALLATION

MANUAL

SMARTEC PLUS

Electronic 90˚ Basin Tap

PLUS1000 (M/B/BM) - Polished

PLUS1000S (M/B/BM) - Satin

Electronic Wall Mounted Tap

PLUS2500 (M/B/BM) - Polished

PLUS2500S (M/B/BM) - Satin

Contents

Product Features 3

Product Range 4

Technical Drawings 5

Unit components 6

General Connections 8

Sensitivity Adjustment 10

Electronic Basin Tap Installation 11

Electronic Wall Mounted Tap Installation 12

Product Warranty 14

www.gentecaustralia.com.au

Service inspections at regular intervals especially in high usage areas will assist in

optimising the operational life of the product.

Smartec Plus by Gentec

The stainless steel Smartec Plus range of electronic sensor operated touch free tapware

incorporates advanced laser technology for precise sensor actuation. This technology

provides accurate object recognition within the sensor range and is unaffected by

surrounding reﬂective surfaces. Mains and battery power options increases the installation

ﬂexibility whilst being highly energy efﬁcient.

The sensor range is easily adjustable in the ﬁeld to suit varied installation conditions and

facility requirements. The water efﬁcient 6 Star WELS rated Smartec Plus range utilises

laminar ﬂow technology eliminating the risk of aerosol creation where traditional aerators

are used. When combined with the factory set Hygiene Flush programming, the Smartec

Plus range presents as an optimum solution for improved health and hygiene within

facilities.

Infection control features Factory set Hygiene Flush programming

(available upon request)

Power Options

6V Mains with battery back up

Mains only

Battery only

Laser Sensor Technology

Touch Free actuation with variable timing

programming (available upon request)

Adjustable sensor range up to 160mm +/- 10%

Application

Commercial, Institutional, Healthcare and

Education facilities inclusive of food preparation,

child care and accessible design applications

Settings

Standard setting- the tap is programmed to

operate when hands are in use.

Temperature probe ready for remote monitoring.

3718

74816

For optimum operationallife, the installation of a PRV set to 350kPa is recommended

Product Range

PLUS1000 M / B / BM

ELECTRONIC 90˚ BASIN TAP

PLUS2500 M / B / BM

ELECTRONIC WALL MOUNTED TAP

www.gentecaustralia.com.au

Service inspections at regular intervals especially in high usage areas will assist in

optimising the operational life of the product.

Product Range

PLUS1000 M / B / BM

ELECTRONIC 90˚BASIN TAP

PLUS2500 M / B / BM POWER CONTROL BOX

ELECTRONIC WALL MOUNTED TAP SOLENOID

FA EDC

FA EDCB

SOLENOID

Smartec

Steven

Penson

SCALE

1 : 3

APPROVED BY PRODUCT RANGE

LAST UPDATE

02/03/20

solenoid

6, 20 -28 Ricketty St

Mascot, NSW 2020

www.gentecaustralia.com.au

info@gentecaustralia.com.au

This drawing is property of

Gentec Australia Pty Ltd

All dimensions are in mm

unless speciﬁed.

PRODUCT CODE AND DESCRIPTION

MAR-LD-STS01-MB-020320

168.5

57.5 4

138.5

154

91.5

Ø22

G1/2

15.5

G1/2

Plug 16

26.6

12.9

13.7

FA EDC

FA EDCB

PLUS1000BM

Smartec Plus

Steven

Penson

SCALE

1 : 2

APPROVED BY PRODUCT RANGE

LAST UPDATE

02/03/20

Electronic Single Temperature Bench Mounted Tap

6, 20 -28 Ricketty St

Mascot, NSW 2020

www.gentecaustralia.com.au

info@gentecaustralia.com.au

This drawing is property of

Gentec Australia Pty Ltd

All dimensions are in mm

unless speciﬁed.

PRODUCT CODE AND DESCRIPTION

MAR-LD-PLUS01-MB-020320

160.7

110

Ø55.0

M34*1.5

149

120.5

FA EDC

FA EDCB

PLUS2500

Smartec Plus

Steven

Penson

SCALE

1 : 2

APPROVED BY PRODUCT RANGE

LAST UPDATE

02/03/20

Wall Mounted Electronic Single Temperature Bench Mounted Tap

6, 20 -28 Ricketty St

Mascot, NSW 2020

www.gentecaustralia.com.au

info@gentecaustralia.com.au

This drawing is property of

Gentec Australia Pty Ltd

All dimensions are in mm

unless speciﬁed.

PRODUCT CODE AND DESCRIPTION

MAR-LD-PLUS01-MB-020320

220

251

G1/2

Technical Drawings

For optimum operationallife, the installation of a PRV set to 350kPa is recommended

Spare Parts Breakdown

DIAGRAM 1: PLUS1000BM

DIAGRAM 2: PLUS2500BM

www.gentecaustralia.com.au

Service inspections at regular intervals especially in high usage areas will assist in

optimising the operational life of the product.

Conﬁguration

Power Option

- Battery

- Mains

- Mains and Battery

Finish Polished / Satin

Spare Parts Breakdown

No. Description Qty

01 Tap Body 1

02 Aerator Housing/

cover 1

03 Aerator 1

04 Fixing kit 1

4A "O" Ring 1

4B Washer 1

4C Fixing Plate 1

4D Fixing Nut 1

4E Screws 2

05 Flexible Hose 1

06 Sensor 1

07 Temperature Probe *

No. Description Qty

01 Tap Body 1

02 Aerator Housing /

Cover 1

03 Aerator 1

04 Hex Screws 2

05 Spout Flange 1

06 Mounting Screws 4

07 Wall Plugs 4

08 Back Nut 1

09 Threaded Piece 1

10 Sensors 1

11 Grub Screw 1

12 Flange 1

TABLE 1: PLUS1000BM TABLE 2: PLUS2500BM

OPERATION REQUIREMENTS

Water Pressure

- Minimum 50kPa

- Optimum 350kPa

- Maximum 450kPa**

Temperature - Minimum 10˚C

- Maximum 50˚C

* Not all spare components are available for individual sale. Contact GENTEC for more

information.

* * Gentec recommends a maximum water supply pressure of 450kPa for the Smartec Plus

range

For optimum operationallife, the installation of a PRV set to 350kPa is recommended

General Connections

BM: Baery and Mains Operated

B: Baery Operated

M: Mains Operated

Screw the solenoid box to the wall using

the screws provided.

Ensure to have enough space between

the wall and the ﬁxing point.

FOR ALL UNITS

PLUS1000BM, PLUS2500BM

When using the unit for

the ﬁrst time

•Make sure to turn the power

on ﬁrst and then the water

ﬂow.

•Lines must be ﬂushed

before installation.

www.gentecaustralia.com.au

Service inspections at regular intervals especially in high usage areas will assist in

optimising the operational life of the product.

• 2m extension cables are available if

required. The extension can be use

either for the sensor or for the power.

Not for extending both.

3. Connect the water supply to the

solenoid box inlet.

4. Plug in the solenoid box. Make sure

to turn the power ﬁrst and then the

water ﬂow.

• When the unit is powered on, water

should ﬂow immediately when you put

your hands within range of the sensor.

When you remove your hands out

of range, water should stop within 2

seconds.

The maximum duration of continuous

ﬂow is 1 minute.

BATTERY CHANGE

1. In case you have plugged in the mains,

disconnect power and open the cover

of the control box, open the battery

holder, remove the batteries and

replace all batteries with new ones

2. Please install the batteries in the right

direction, the + and – side are indicated

in the battery holder.

3. Close the battery holder, place the cover

back in place and tighten the screws.

1. Connect the ﬂexible hose from the tap

to the control box outlet. Ensure the

connection is free of any water leak.

2. Connect the tap sensor wires (1m length)

onto the solenoid box matching the cables

by colour.

For optimum operationallife, the installation of a PRV set to 350kPa is recommended

1. The sensor’s maximum range is 160mm

+/- 10%

2. To reprogram sensitivity disconnect the

sensor power cable from the solenoid

box and leave it for at least 20 seconds.

3. Connect power cable again andwait forthe

sensor light to start ﬂashing. Immediately,

place your ﬁnger on the sensor until

the light becomes solid. This allows the

sensor to enter in reprogramming mode.

4. Place your hand to the desired

position to adjust sensitivity and hold

it in position until the light turns off.

5. To set the sensor at maximum distance,

disconnect the power cable from

the solenoid box, and repeat step

3to enter in reprogramming mode.

• Do not place anything in front of the

sensor and allow the light to turn off.

FOR ALL UNITS

PLUS1000BM, PLUS2500BM

Sensitivity Adjustment

Otros manuales para SMARTEC PLUS

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto de plomería de Gentec

Gentec

Gentec NGM1000 Manual de usuario

Gentec

Gentec GPR1000 Manual de usuario

Gentec

Gentec GPT7000 Manual de usuario

Gentec

Gentec GPure Bubblers GPT8000 Manual de usuario

Gentec

Gentec TFT8000 Manual de usuario

Gentec

Gentec Single Lever Basin Mixer GPN1000 Manual de usuario

Gentec

Gentec JETF1200 Manual de usuario

Gentec

Gentec SMARTEC STS1000 Manual de usuario

Manuales populares de Producto de plomería de otras marcas

Weka

Weka 506.2020.00E Instrucciones de funcionamiento

Kohler

Kohler K-6228 Instrucciones de montaje

UBERHAUS DESIGN

UBERHAUS DESIGN 75175017 Manual de usuario

American Standard

American Standard DetectLink 6072121 Manual de usuario

Uponor

Uponor Contec TS Manual de usuario

Pfister

Pfister Selia 49-SL Manual de usuario

Fortis

Fortis VITRINA 6068700 Manual de usuario

Fortis

Fortis MILANO 78211JS Manual de usuario

Kohler

Kohler K-12183 Instrucciones de montaje

Maxxus

Maxxus MX-M206-01 Manual de usuario

Moen

Moen 5922 Series Manual de usuario

Viega

Viega Prevista Pure 8512 Manual de usuario

Kohler

Kohler Centerset K-15240 Instrucciones de montaje

Viega

Viega Prevista Dry 8522.33 Manual de usuario

Sanela

Sanela Lema SLP 59RB Manual de usuario

Elkay

Elkay EDF15AC Manual de instalación

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Manual

baliv

baliv WT-140 Manual de usuario