General MM80G Manual de usuario
+
+
+
1
a scale for wood
moisture
b scalefor
mineral building
materials
c value out of
range indicator
d low battery
charge
indicator
a
1.
2.
4
1. 2.
Self-test function
3ON/OFFThis unit switches
into an energy-
saving mode after 3
minutes. To wake up
the unit again, acti-
vate the ON button
2 times. To switch o
the unit, activate the
ON button 1 time.
+
Lithium battery CR2032
bc d
2
Mineral building materials
Be aware that walls (or sur-
faces) made of several dierent
materials, or even variations in
the material‘s consistency, can
cause measurement results to
be falsied. Perform multiple
comparative measurements.
Read measurement results
from the right-hand building
materials scale.
Refer to the conversion table
below in order to obtain more
precise measurements for
dierent materials.
5Wood
The location to be measured
should be untreated, free of
knots, dirt and resin.
Measurements should not
be made on the end faces of
wood becausethese areas
dry particularly quickly such
that they produce incorrect
measurement results.
Read measurement results
from theleft-hand wood
moisture scale.
Refer to the conversion table
below in order to obtain more
precise measurements for
dierent materials.
Function/application:This material moisture instrument detects
and evaluates the material moisture content of wood and building
materials by way of electric resistance measurement. The displayed
valueis material moisture in % with respect to dry mass. Example :
100% material moisture for 1 lb of wet wood =.5 lb water.
Measurement procedure notice:
Be sure neither supply lines (electric lines, water pipes, etc) nor a
metal subsurfaceis present at the location tobe measured. Insert
the electrodes as far into the material as possible but never use
excessive or sudden impact force as this could damage the unit.
Always pull the unit out of the material with left/right twisting
motion. Perform several comparative measurements atdie-
rent locations to minimise measurement error.
The sharply pointed electrodes present an injury hazard .Always
put thesafety cap on the unit when it is not in use or being
transported.
Measurement
scale
> 44
44
42
40
38
36
34
32
30
28
26
24
22
20
18
16
Conversion table
all values in material moisture %
28,0
26,0
25,0
24,0
23,5
23,0
22,5
22,0
20,0
19,2
17,8
16,2
15,7
13,8
11,3
23,5
22,0
21,0
20,0
19,6
19,1
18,6
18,0
16,6
15,8
14,6
13,2
12,8
11,0
8,9
1,6
1,5
1,4
1,2
1,1
1,0
2,4
2,1
2,0
1,8
1,2
1,0
0,8
0,5
1,8
1,7
1,6
1,5
1,4
1,3
1,2
10,0
8,0
7,0
6,0
5,7
5,0
4,5
4,0
3,7
3,2
Wet Dry
Table notices:
Measurements indicated on the instrument‘sdual-scale are based
on the common built-in material characteristics for wood and
building materials.More precise results can be obtained forthe
given wood or building material when the indicated measurement
is referenced to the conversion table.
Example: Measurement on the left scale: 24%, corresponds
to 1,2%for gypsum plaster. Values with a grey background are
considered to be wet.
Beech
Spruce/
Oak/
Birch
concrete
Plaster
Cement
screed
Aerated
concrete
General notices:
Functional and operational safety is only warranted when the
instrumentis operated within thespecied climatic conditions
andis only used for those purposes for which it is designed.
Responsibility fortheinterpretation of measurement results and
consequentactions taken lie entirely with theuser.
Warranty
The warranty period is 1year from thedate of purchase. The warranty
covers all material ormanufacturing defects occurring duringthis time.
The following are excluded from warranty: Damage due to improper
use (e.g. operationwith wrong type of current/voltage, connection
to unsuitable powersource,fall onto hardsurface, etc.) or improper
storage, normal wear and tear, and defects which only insignicantly
impair the value or suitability for use. Any tampering by unauthorised
persons will render this warranty void. In the eventthat you need
to claimwarranty, please takethe complete devicetogether with
all information andthe invoiceto one of ourdealers and have them
contact us.
Technical revisions reserved. 07/08
6 ... 44%
0.2 ... 2.2%
± 2% of full scale measurement
± 0.4% of full scale measurement
2 scales, general wood cha-
racteristic, general mineral buil-
ding materials characteristic
3 x lithium 3 V CR2032
72 °F
14 to 140 °F
32 to 104 °F
85%
Measurement range for
wood and other materials
Building materials measure-
ment range
Accuracy for wood and
other materials
Building materials accuracy
Dual scale
Power supply
Nominal temperature
Permissible storage
temperature
Permissible operating tem-
perature
Permissible max. relative
humidity
Technical data
Tabla de contenidos
Otros manuales de Instrumento de medición de General
General
General DPH230SD Manual de usuario
General
General XL1 Manual de usuario
General
General A3G Manual de usuario
General
General MM70 Manual de usuario
General
General MMH800 Manual de usuario
General
General DT4208SD Manual de usuario
General
General MMD900 Manual de usuario
General
General MM8 Manual de usuario
General
General SAM990DW Manual de usuario
General
General DSMM600 Manual de usuario
General
General PCT2236B Manual de usuario
General
General DM8252 Manual de usuario
General
General DSM402SD Manual de usuario
General
General SAF-T-LITE I.S. 300 Guía
General
General EP8710 Manual de usuario
General
General MMD950 Manual de usuario
General
General DLM204 Manual de usuario
General
General 24x Manual de usuario
General
General DM8200 Manual de usuario
General
General EMHT40 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario