General PTH8708 Manual de usuario

GENERAL TOOLS

& INSTRUMENTS™

75 Seaview Drive

Secaucus, NJ 07094-1806

PHONE (212) 431-6100

FAX (212) 431-6499

TOLL FREE (800) 697-8665

e-mail: [email protected]

www.generaltools.com

PTH8708 User’s Manual

Specifications subject to change

without notice

NOTICE - WE ARE NOT

RESPONSIBLE FOR

TYPOGRAPHICAL ERRORS.

MAN#PTH8708 05/08

PTH8708

USER’S MANUAL

DIGITAL

TEMPERATURE/

HUMIDITY

PEN

Ideal for: HVAC, Hospitals, Laboratories,

Computer Rooms, Paper Mills, General Use,

Wood & Furniture Industry, Industrial,

Printing, Nurseries, Film Processing,

Greenhouses, Tobacco Industry

FEATURES:

• Simultaneous Display of Temperature

and Humidity

• °F/°C Switch

• Auto Power Off:

Approximately after 20 minutes

• MIN/MAX Memory

• RESET Switch

• HOLD Switch

• Pocket-sized • Belt or Pocket Clip

SPECIFICATIONS:

• Range: 14° to 122°F (-10° to 45°C)

• Humidity Range: 5 to 95% RH

• Accuracy: ±3% from 10 to 90%RH

at 77°F (25°C); ±5% from 5 to 10%RH

and from 90 to 95%RH

• Resolution: 0.1°F/0.1°C

• Sensor: Electronic Capacitance

Polymer Film Sensor

• Power Source: 1 “CR2032” battery (included)

• Battery Life: 150 hours

• Dimensions: 6.9" x 1.7" x 0.6"

(175 x 42 x 16 mm)

• Weight: 1.6 oz (45 g)

• Color: Dark Gray

PTH8708 Manual 050815 FINAL Page 1

NORMAL MEASUREMENT:

1. Turn meter on by pressing “ON/OFF” button.

2. Press “C/F” key to convert reading to

desired range. Both temperature and

relative humidity measurement will

display simultaneously.

MIN/MAXFUNCTION:

1. Press and hold “MIN/MAX” button until

(MIN) appears on display. Display is now

showing minimum humidity and temperature

reading in memory.

2. Press and hold “MIN/MAX” button again

until (MAX) appears on display. Display is

now showing maximum humidity and

temperature readings in memory.

3. To return to current temperature and

humidity readings, press and hold

“MIN/MAX” button until (MIN) or (MAX)

disappears from display.

4. To clear current “MIN” and “MAX” reading

from memory, press and hold “RESET”

button until entire display flashes.

DATE HOLDFUNCTION:

1. Press “HOLD” button until (HLD) appears

in display. The current reading is now

being held and will not change until

“HOLD” function is cancelled.

2. Press “RESET” button to cancel the

“HOLD” function. The Hold function

can be used for temperature, humidity,

dew-point and wet bulb.

AUTOPOWER OFF:

1. Unit will turn itself off after 20 minutes.

(Sleep mode)

2. To override Auto Power Off function

(Non-Sleep Mode) press “ON/OFF” and

“MIN/MAX” button simultaneously.

After the full display appears release

“ON/OFF” button, the display will show

“n” in left side. When “n” appears, then

release “MIN/MAX” button. Unit will now

be in Non-sleep Mode.

CHANGINGTHEBATTERY:

1. Use a coin to turn off the battery cover.

2. Put the battery whose “+” faces out

into the battery compartment, place the

battery cover back and lock it.

NOTE:

Remember low batteries will tend

to give inaccurate readings, so make sure

you have good batteries.

Please do not immerse probe into liquids

as this will cause permanent damage

to the sensor.

PTH8708 Manual Page 2 060815

Tabla de contenidos

Otros manuales de Instrumento de medición de General

General

General PalmScope DCS950 Manual de usuario

General

General GMK-05-MB Manual de usuario

General

General DT4208SD Manual de usuario

General

General MSV100 Manual de usuario

General

General DCS1100 Manual de usuario

General

General MM8 Manual de usuario

General

General MMD900 Manual de usuario

General

General UV512C Manual de usuario

General

General EMF1394DL Manual de usuario

General

General CM660 Manual de usuario

General

General RHMG650 Manual de usuario

General

General DMM51FSG Manual de usuario

General

General MMD950 Manual de usuario

General

General 24x Manual de usuario

General

General TOOLSMART TS02 Manual de usuario

General

General MMD4E Manual de usuario

General

General VOC08 Manual de usuario

General

General TS01 Manual de usuario

General

General DSM402SD Manual de usuario

General

General DSM8925 Manual de usuario

General

General MM70 Manual de usuario

General

General CA10 Manual de usuario

General

General MMD7003 Manual de usuario

General

General MMD900 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario