General MM700D Manual de usuario

INDEX H. Specifications

Measurement range

(% WME) 5.5 ~ 99.9% (Digital LCD Display)

Accuracy (at 25°C) ±1% (difference as the testing

materials.)

Resolution 0.1%

Operating Range -10 ~ +50°C (with temp. compensated)

No. of wood

calibration scales 8 (choose form “MODE” key)

Sampling rate Approx. 1 reading/Sec.

Main Functions

Auto/Manual turn off, Hold function,

Record Maximum & Minimum values,

Built-in Calibrator, Wood Calibration

Scales, Low Battery warning.

Power Supply 9V Battery ×1 pc or ACAdaptor (option)

Battery Life Approx. 250 hours (continues)

Meter 168 ×73 × 33 mm (6.6 ×3.0×1.3 inch)

Dimensions Probe L: 120 mm, Cable: 1.2 meter (Pin Type)

Weight Approx. 180g, (6.3 oz) including battery

Option Accessories

1. Roller Type Moisture Probe(No.7012)

2. AC Adaptor ………..………(No.7019)

3. Extension 0f Electrodes pin (No.701P)

5cm ~ 20cm

A.Introductions -------------------------- 1

B. Features --------------------------------- 1

C. The Panel and Shape ---------------- 2

D. The LCD Display ---------------------- 3

E. Operation Instructions --------- 4

F. Calibration Tables -------------------- 7

G. Precaution ------------------------------ 8

H. Specifications ------------------------- 9

- 9 -

G. Precaution

1. The power supply is 9V Battery, and can option to useAC

adaptor. Please notice the power supply when operation.

2. When measuring, please don’t touch the moisture probe,

and don’t use the moisture probe and outside moisture

probe simultaneously to avoid wrong measuring value.

3. Notice: The range of temperature compensate is –10 ~

+50°C. If temperature difference is too far between indoor

and outdoor. Please wait few minutes before measuring to

get accurate value.

4. Please keep dry of moisture probe, to avoid become rusty

to effect measuring value.

5. When calibration. Please be sure the moisture probe is not

in measuring.

【Notice】To measuring special materials, Please contact

your local distributors.

【Notice】Don’t repair or modify by yourself. Please

contact your local distributors.

- 8 -

A. Introductions

The Moisture Meter M-700 is the complete instrument for

measuring moisture levels in materials. Read moisture reading

of materials from high accurate digital LCD indicator. Press

MODE key to choice 8 kinds of calibration scales, correspond

different types of woods and materials to get more accurate

moisture reading. Press REC (Record) and H-D (Hold) keys

can record the maximum and minimum reading, which can

application for majority sampling and quality control. M-700

built-in calibration function for checking condition of instrument.

Just press CAL (Calibration) key and adjust calibration screw

to calibration by yourself. M-700 is very suit for different

environment, and has temperature compensate function to let

reading more accurate, fast and stable. M-700 cans application

for Wood, Bamboo, Building, Leather, Cloth, Medication, Paper,

Powder, Ceramics, Cement and Apply a reference value to

moisture levels, etc.

B. Features

•High accurate, Auto. temperature compensated.

•Function of Auto / Manual Power off and Data Hold ,Records

MAX / MIN reading.

•According to measuring material, suitable different type

of probes.

•Built-in 8 calibration scales according different type of wood.

•Built-in calibration function for checking condition of

instrument.

•One 9V battery powered, As well as AC powered using an

adaptor (Option).

•Fast response, Stability, Rugged Design.

- 1 -

Calibration Method:

Turn off the meter. Keep the MODE (CAL) key pressed

and press key to turn on the power. When display

indicate symbol “CAL” to enter calibration Mode. The

indication reading should be 18.4% (±0.5). If need to

calibrate, please use screwdriver to calibrate from right-side

of meter.

※After calibration, please turn off the meter to save .

【Notice】The calibration reading will have deviations in

the operation ambient.

【Notice】When calibration, please make sure the probe

suspended in midair and can’t contact any

object.

- 6 -

D. The LCD Display

- 3 -

Manual Power Off

Calibration Mode

Recording Mode

Moisture Value

No. of Calibration Table

Low battery

MAX Value

Hold Value

MIN Value

Recording value warns

E. Operation Instructions

1. Turn On:Press key to turn on the Meter, It will run to

set up inside Automatic temperture compensation in few

seconds. (display 8888).

※Meter will be auto turn off after 30 seconds.

2. Manual Turn Off:Keep the

key Pressed and press

key to turn on the power, The display will indicate symbol

“E” to enter Manual Power off mode.

※Must press key to turn off the power.

3. Moisture Measuring: Insert two pins top of the meter (or

optional probe) to materials would like to test, and read

moisture value from display.

※When use roller type Moisture Probe, please be sure

both wheels are press on material and slip slightly.

4. Hold Function:Press key before the electrodes pins

leave the testing material to hold the reading.

※Press key three times to return normal mode.

5. MAX, MIN (Record):Press key before the electrodes

pins leave the testing material to record the reading. Display

indicates symbol “M” and flashing “REC”. Repeat above

method to compare the requisite majority readings.

- 4 -

6. MAX, MIN (Recall): After step 5. MAX.MIN.(Record),

press .key to stop record function (display indicates

“HOLD”). Press key again to read MAX reading (display

indicates “MAX HOLD”). Press key again to read MIN

reading (display indicates “HOLD MIN”).

※Press key will delete all readings and return to

normal mode (“MAX HOLD MIN” will disappear).

7. Setting Calibration Scales:When power on, press ……

key to set 8 types of wood calibration scales (Ref. page. 7,

Calibration Tables). Will indicate 1 ~ 8 code under display.

※Meter will pre-set the calibration scale to No.1 after turn

on the power.

8. Confirm and Calibration:The instrument has pass

through strict quality control and precise calibrate. Please

calibrate when follows situation.

※The measuring reading than actual reference value is

too far.

※Measuring reading is not stable to indicate.

※Using in the ambient environment which is high

temperature and high humidity.

※Adjustment for test special materials.

※After repair probe or change new probe (pins).

- 5 -

Tabla de contenidos

Otros manuales de Instrumento de medición de General

General

General MM1E Manual de usuario

General

General DSM8925 Manual de usuario

General

General Mini Airflow DAF3010 Manual de usuario

General

General P16181HP Manual de usuario

General

General DOM5512SD Manual de usuario

General

General DAMP60 Manual de usuario

General

General 24x Manual de usuario

General

General MMD7NP Manual de usuario

General

General RHMG650 Manual de usuario

General

General LDM60 Manual de usuario

General

General MMD4E Manual de usuario

General

General DSM8930 Manual de usuario

General

General DAF4207SD Manual de usuario

General

General DSM403SD Manual de usuario

General

General EP8709 Manual de usuario

General

General DTH04 Manual de usuario

General

General MM70D Manual de usuario

General

General DT4208SD Manual de usuario

General

General PCT2236B Manual de usuario

General

General MM9 Manual de usuario

General

General DAF3009 Manual de usuario

General

General DPH230SD Manual de usuario

General

General DCS1100 Manual de usuario

General

General CT6235B Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario