General A3G Manual de usuario

INSTRUCTION MANUAL

A3G Green Rotary Laser

Please read this instruction manual before operating this product.

Please store this instruction manual in the carry case for future reference.

CAUTION: Class 3 Laser Product

Do not stare directly into the laser beam from apertures.

Do not disassemble the instrument or attempt to perform any internal servicing

as this will void your warranty. No user serviceable parts included.

Only approved and authorised service technicians can carry out warranty repairs.

SAFETY

Please ensure the following items are included with your laser.

If anything is missing please contact your retailer.

ITEM CHECKLIST

Laser glasses Carry case Rechargeable

battery pack

Charger

2x Laser targetsDetector and clampRemote control

General A3G

INCHES CM

90°

SLEEP

45°

10°

180°

Rotating laser port

Protective lighthouse

PRODUCT OVERVIEW

Control panel

90°

45°

10°

180°

CONTROL PANEL

Power

Tilt alarm indicator

Power indicator

Speed control

Counter clockwise rotation

Tilt alarm

Clockwise rotation

Scanning mode

Speed control indicator

DETECTOR CONTROL PANEL

Sound on / off

Coarse / fine mode

LCD display screen

Laser sensor

Speaker

Power

REMOTE CONTROL PANEL

Sleep mode

90°

SLEEP

45°

10°

180°

Counter clockwise rotation

Scanning mode

Clockwise rotation

Speed control

USING YOUR LASER

Power Supply

‣The General A3G is supplied with a rechargeable Ni-MH battery pack that is

located in the base of the unit.

‣It is recommended that the battery pack be completely charged before use.

‣Charging time is approximately 5 hours.

‣Use of the unit over time and changes in temperature may cause increases

or decreases in charging and operation time.

‣The power indicator light will flash when the battery is low. The unit should

be re-charged as soon as possible.

‣To charge the unit insert the charger into the port on the battery pack.

Progress will be shown by the power indicator display on the charger as below:

Red (flashing) = Charger and battery are not connected.

Red (constant) = Battery is charging.

Green (constant) = Battery is charged.

Horizontal Set Up

Vertical Set Up

‣Select a place as close as practical to the work site.

Ensure the location is clear of traffic.

‣Attach the laser to a tripod and place on a level surface.

Ensure the unit is secured correctly and tightened in position.

‣Select a place as close as practical to the work site.

Ensure the location is clear of traffic.

‣Place the laser onto a level surface with the control panel facing upwards.

Operation

‣To turn the unit on press the power button. Self

levelling will commence and the laser will begin to rotate.

‣If the unit is outside the self levelling range the unit will not

level causing the laser beam to flash continuously.

Speed Control

‣Press the speed control button to cycle through various rotational speeds.

‣The speed control indicator will flash slowly when speed is slow and fast

when speed is increased.

Rotation

‣Press the clockwise or counter clockwise button to change the

rotation of the laser head.

Scanning mode

‣To focus the laser beam between two points press the scanning mode

button. Pressing the button multiple times will adjust the angle of the beam.

‣To cancel scan mode press the scanning mode button several times

to cycle through to full rotation.

Tabla de contenidos

Otros manuales de Instrumento de medición de General

General

General DSMM500 Manual de usuario

General

General DPH7011 Manual de usuario

General

General LM30 Manual de usuario

General

General CA10 Manual de usuario

General

General MMD8P Manual de usuario

General

General DM8200 Manual de usuario

General

General LTM1 Manual de usuario

General

General MM70 Manual de usuario

General

General DSM402SD Manual de usuario

General

General VS3000A Manual de usuario

General

General DAF800 Manual de usuario

General

General DSM403SD Manual de usuario

General

General PalmScope DCS950 Manual de usuario

General

General MM9 Manual de usuario

General

General PM930SD Manual de usuario

General

General MM1E Manual de usuario

General

General DSM403SD Manual de usuario

General

General DM8252 Manual de usuario

General

General VOC08 Instrucciones de montaje

General

General UV513AB Manual de usuario

General

General DTH3007SD Manual de usuario

General

General EP8703 Manual de usuario

General

General PCT2236B Manual de usuario

General

General LT2234C Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario