Generac Power Systems 5464 Manual de usuario

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature.......................................................................................................................................................................... -25 º C to 60 º C

Humidity............................................................................................................................................................................... 0 to 95% Non-Condensing

Power Supply..........................................................................................................................................................................................+12 or +24 VDC

Power Usage ............................................................................................................................................................................................ 6 Watts typical

Communication Line.......................................................................................................................... RS485 fully isolated twisted pair cable with shield

Maximum Cable Length.................................................................................................................................................................................... 4000 feet

Relay Output.............................................................................One NO contact (Engergized when annunciator is powered and no faults are present)

Relay Contact Rating.............................................................................................................................................................................. 30 VDC, 1 amp

STANDBY GENERATOR ACCESSORIES

21 Light Remote Annunciator

Liquid-Cooled Generator Sets

Model 5465

Model 5466

Model 5464

The Remote Annunciator Panel provides remote monitoring and

annunciation of up to 18 generator parameters using LED’s located on

the annunciator keypad. It also provides two system level warnings which

are System Ready and Communications OK.

The Relay panel has up to 8 selectable functions on form A relays,

and multiple relay panels can be connected for all 18 generator

parameters.

The speciﬁc faults can be selected using either the DIP switches located

on the annunciator circuit board or through a computer via the RS232

connection on the circuit board. All relays are energized on power up and

open during a fault condition.

Communication is via a RS485 serial data link and power is supplied by

the generator battery (+12 VDC or +24 VDC)

Note: These units are only compatible with the H-series generator

controller (70-150 kW)

DESCRIPTION

Speciﬁcations

Surface Mount Annunciator

21 Light Remote Annunciator

Flush Mount Annunciator

Function Color Alarm Latched

Pre-Low Oil Pressure Yellow nYes Yes

Pre-High Water Temp Yellow nYes Yes

Pre Low Water Temp Yellow nYes Yes

Pre-Low Fuel Yellow nYes Yes

Battery Charge AC Fail Yellow nYes No

Low Battery Voltage Yellow nYes No

High Battery Voltage Yellow nNo No

Not in Auto Red nYes No

RPM Sensor Loss Red nYes Yes

Overcrank Red nYes Yes

Overspeed Red nYes Yes

Low Oil Pressure Red nYes Yes

Hi Water Temp Red nYes Yes

Low Water Level Red nYes Yes

Emergency Stop Red nYes No

Gen Running Yellow nNo No

Gen Power (ATS) Yellow nNo No

Line Power (ATS) Green nNo No

Systems Ready Green nYes No

Communications OK Green nYes No

Spare Green nNo No

Spare Keypad Switch - Can be used to implement a remote start function. (Model 5464 only)

5.8

4.530.812 Dia.

0.812 Dia.

Both sides

0.86

9.06 1.64

2.32

6.49

11.42

8.27

9.64

Outside

Cut

Rough Opening

6.75 " x 9.88 "

Four mounting holes for

21 Light Annunciator

4-mm -0.7 Female Thread

1.57

Thru

R0.59

Both Sides

1.93

10.24

7.09

1.21

1.42

0.87

The 21-Light Annunciator can mount to

a ﬂat surface with connections through

the 0.812 Dia. knockout on the back

surface or through 0.812 knockouts on

sides as shown.

This Flush Mount Box is recessed

into the wall opening and the sur-

face mount annunciator mounts to

the (4) 4 mm screw holes on the

back surface. After wire connec-

tions are made the front annuncia-

tor cover is attached.

Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • guardiangenerators.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Generac Power Systems

Generac Power Systems

Generac Power Systems GTS "W" Manual de usuario

Generac Power Systems

Generac Power Systems RXSW400A3CUL Manual de usuario

Generac Power Systems

Generac Power Systems RXUW200A3 Manual de usuario

Generac Power Systems

Generac Power Systems GenTran 6295 Manual de usuario

Generac Power Systems

Generac Power Systems rtg16eza1 Manual de usuario

Generac Power Systems

Generac Power Systems GTS Series Manual de usuario

Generac Power Systems

Generac Power Systems GenTran 6333 Hoja de instrucciones

Generac Power Systems

Generac Power Systems GenTran 6375 Manual de usuario

Generac Power Systems

Generac Power Systems RTSN100J3S Manual de usuario

Generac Power Systems

Generac Power Systems 4678-1 Manual de usuario

Generac Power Systems

Generac Power Systems 04635-0 Manual de usuario

Generac Power Systems

Generac Power Systems OG 2697 Hoja de instrucciones

Generac Power Systems

Generac Power Systems RXGW20SHA3 Manual de usuario

Generac Power Systems

Generac Power Systems RXSW200A3F Manual de usuario

Generac Power Systems

Generac Power Systems 004945-1 Manual de usuario

Generac Power Systems

Generac Power Systems PWRview RXEMW200A3 Manual de usuario

Generac Power Systems

Generac Power Systems TTS Series Manual de usuario

Generac Power Systems

Generac Power Systems GenTran 6294 Manual de usuario

Generac Power Systems

Generac Power Systems GenReady Series 005448-2 Guía de instalación

Generac Power Systems

Generac Power Systems GenTran 6375 Hoja de instrucciones

Generac Power Systems

Generac Power Systems TMS200 Manual de usuario

Generac Power Systems

Generac Power Systems 004635-3 Manual de usuario

Generac Power Systems

Generac Power Systems GenTran 6379 Hoja de instrucciones

Generac Power Systems

Generac Power Systems GenTran 6379 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario