Gefen 4x2 HD-SDI Manual de usuario
4x2 HD-SDI
Switcher
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
4x2 HD-SDI Switcher is a trademark of Gefen Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the 4x2 HD-SDI Switcher
RMT4-IR Installation
Specifications
Warranty
1
2
3
4
5
6
7
Congratulations on your purchase of the ex•tend•it 4x2 HD-SDI Switcher. Your complete
satisfaction is very important to us.
Readily Access One of Four Sources with One or Two Displays
4 Sources + 1 or 2 Displays = Cost Effective Multi-Tasking
The ex•tend•it 4x2 HD-SDI Switcher is unique in its ability to connect two HD-SDI
displays to four HD-SDI sources. Select from multiple sources using the IR remote
control that comes with the unit. When selected, a source may be viewed on either one
or two HD-SDI displays. Source switching is completed swiftly and high definition video
up to 1080p is supported.
SDI
SDI (serial digital interface), used primarily in broadcasting, converts and transmits digi-
tal video through SDI connectors. It enables computers to process high definition, high
quality video.
How it Works
Connect your HD-SDI sources and the one or two HD-SDI displays to the 4x2 HD-SDI
Switcher. When all the equipment is powered and connected, switching can begin.
The ex•tend•it line offers solutions for noise, space and security concerns, data center
control, information distribution, conference room presentation, school and corporate
training environments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime of support from a team of outstanding engineers.
The ex•tend•it 4x2 HD-SDI Switcher allows two HDTV DVI devices to be switched easily
in to one HDTV DVI compatible monitor or projector. The 4x2 HD-SDI Switcher can also
be placed at the end of a long DVI cable to regenerate the DVI signal.
INTRODUCTION
1
FEATURES
Features
• Saves money—use one or two displays to access four sources
• Saves space—eliminates unnecessary hardware while increasing efficiency
• Saves time—switch between sources in an instant using the RMT-4 IR remote. Installs
in seconds
• Lifetime support—includes one-year manufacturer’s warranty and free technical
support for the lifetime of the product
Includes:
(1) 4x2 HD-SDI Switcher
(1) 5v Power Supply
(1) RMT-4 IR remote control
2
PANEL DESCRIPTIONS
Connects to 5VDC
power supply
SDI Out 1
3
SDI Out 2
SDI In 1 SDI In 2 SDI In 3 SDI In 4
CONNECTING AND OPERATING THE 4X2 HD-SDI SWITCHER
How to Connect the 4x2 HD-SDI Switcher to your devices
1 Connect your HD-SDI inputs into Input 1 thru 4 on the 4x2 HD-SDI Switcher.
2Connect one or two displays into the outputs.
3Connect the 5VDC power supply into the 4x2 HD-SDI Switcher.
How to Operate the 4x2 HD-SDI Switcher
1 Use the RMT4-IR remote control port to remotely toggle between sources.
4
RMT4-IR INSTALLATION
5
1. Remove battery cover from the back of the RMT4-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT4-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT4-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
SPECIFICATIONS
6
• Input/Output: SDI - SMPTE 259M-C (270Mbps);HD-SDI - SMPTE 292M (1.485, 1.485/
1.001 Gbps); NTSC; PAL:
720p @ 60, 59.94, 50Hz
1080p @ 30, 29.97, 25, 24 & 23.98Hz,
1080i @ 60, 59.94, 50, 48 & 47.95Hz
• Power Supply: 5VDC
• Power: external adapter with locking power connector
• Dimensions: 3.5“ D x 2.875” W x 1” H
• Shipping Weight: 4 lbs.
Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notified within
two (2) year from the date of shipment, Gefen Inc. will, at its option repair or replace
the equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications.
Equipment that fails under conditions other than those covered will be
repaired at the current price of parts and labor in effect at the time of repair. Such
repairs are warranted for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied,
including without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be
accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that may
be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect,
special, incidental, or consequential damages resulting from any defect or omission
in this manual, even if advised of the possibility of such damages. The technical
information contained herein regarding EXT-HDSDI-442 features and specifications is
subject to change without notice.
WARRANTY
7
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cambiar de Gefen
Gefen
Gefen DVI-441N Manual de usuario
Gefen
Gefen 2X1 DVI KVM SWITCHER Manual de usuario
Gefen
Gefen EXT-UHD600-41 Manual de usuario
Gefen
Gefen EXT-DVIKVM-241 Manual de usuario
Gefen
Gefen GTV-AUDDEC-N Manual de usuario
Gefen
Gefen EXT-DVIKVM-441 Manual de usuario
Gefen
Gefen EXT-DVIKVM-LAN Manual de usuario
Gefen
Gefen Digital Audio Switcher Manual de usuario
Gefen
Gefen EXT-3GSDI-441 Manual de usuario
Gefen
Gefen HDMI-441 Manual de usuario
Gefen
Gefen EXT-3GSDI-441 Manual de usuario
Gefen
Gefen 2x4 HDMI Switcher/Splitter Manual de usuario
Gefen
Gefen EXT-MINIDVI-241N Manual de usuario
Gefen
Gefen 2X1 DVI KVM SWITCHER Manual de usuario
Gefen
Gefen HDMI-341 Manual de usuario
Gefen
Gefen DVI-841 Manual de usuario
Gefen
Gefen DVI-441DLS Manual de usuario
Gefen
Gefen HDMI-244 Manual de usuario
Gefen
Gefen EXT-HDMI1.3-441 Manual de usuario
Gefen
Gefen EXT-UHDV-HBTLS-TX Manual de usuario
