Gefen 2x8 HDMI Manual de usuario
2x8 HDMI DA
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST.
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
2x8 HDMI DA is a trademark of Gefen Inc.
HDMI is a trademark of hdmi.org
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE
TABLE OF CONTENTS
Introduction
Features
Panel Descriptions
Connecting and Operating the 2x8 HDMI DA
RMT2-IR Installation
RS-232 Interface
Specifications
Warranty
1
2
3
4
5
6
7
8
Congratulations on your purchase of the ex•tend•it 2x8 HDMI Distribution Amplifier. Your
complete satisfaction is very important to us.
Gefen’s line of HDTV switches, extenders, and splitters are designed to make yourA/V
equipment use more comfortable, more productive and less expensive.
The 2x8 HDMI DA allows access to two HDTV devices, using up to eight HDTV dis-
plays. All output displays will have mirrored images.
The ex•tend•it line offers solutions for Home Theater, AV installation, data center, infor-
mation distribution, conference room presentation, school and corporate training envi-
ronments.
Our Commitment
Gefen will always offer the finest quality product at the best possible price. Included in
that price is a lifetime support from a team of outstanding engineers.
The ex•tend•it 2x8 HDMI DA allows two HDTV HDMI devices to be distributed easily
in to eight HDTV HDMI compatible monitors or projectors. Simply connect your HDTV
displays to the DA’s display outputs. The 2x8 HDMI DA can also be placed at the end of
a long HDMI cable to regenerate the HDMI signal.
INTRODUCTION
1
FEATURES
Features
• Switches easily between any two DVI/HDMI sources
• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions
• Maintains highest HDMI single link video resolution
• Maintains highest HDMI digital audio signal
• Supports HDCP compliant devices
• HDMI or DVI to HDMI cables are used to connect the inputs and switcher output
• Inputs can be switched with the IR remote control or through the RS232 connector.
• Installs in seconds
Includes:
(1) 2x8 HDMI DA
(1) 6’ HDMI cables (M-M)
(1) 24VDC Power Supply
(1) RMT2-IR
(1) Users Manual
2
PANEL DESCRIPTIONS
Connects to
24VDC power
supply
IR eye
Indicates which
input is selected
3
RS232
Controller Port
HDMI
In 1 HDMI
In 2
IR Extender
Port
HDMI
Out 1 HDMI
Out 2
Power LED
HDMI
Out 3 HDMI
Out 4 HDMI
Out 5 HDMI
Out 6 HDMI
Out 7 HDMI
Out 8
CONNECTING AND OPERATING THE 2X8 HDMI DA
How to Connect the 2x8 HDMI DA to your devices
1 Connect the supplied cable from the HDTV HDMI source into the 2x8 HDMI DA
input.
2Connect the cables from your displays (monitor or projector) into the HDMI outs of the
2x8 HDMI DA.
3 Plug the 24VDC power supply into the 2x8 HDMI DA.
How to Control the 2x8 HDMI DA
Use the RMT2-IR remote control to toggle between sources.
4
5
RMT2-IR INSTALLATION
1. Remove battery cover from the back of the RMT2-IR remote.
2. Verify that dip switches 1 & 2 are in the down (OFF) position.
3. Insert the battery, hold the battery so that you can see the positive side facing up. The
side that is not marked must be facing down.
4. Test the RMT2-IR remote by pressing ONLY one button at a time. The indicator light
on the remote will flash once each time you press a button. WARNING: Do not press
multiple buttons simultaneously and do NOT press buttons rapidly. These actions will
cause the remote to reset and steps 1-4 will have to be repeated.
Note: The RMT2-IR ships with two batteries. One battery is required for operation, the
second battery is complimentary.
The optional IR extender allows you to
relocate your HDMI Switcher and still have
IR control of the HDMI Switcher
RS-232 INTERFACE
6
RS-232 Pinout
RJ-11 DB9
1 - Ground 10 - Ground
2 - RxD 3 - TxD
3 - TxD 2 - RxD
4 - RTS 8 - CTS
5 - CTS 7 - RTS
6 - Ground 10 - Ground
*Pin 10 = Shield
Binary Table
ASCII Input Binary
1 1 0011 0001
2 2 0011 0010
Terminal Settings
Bits per second ..................................................................................................... 19200
Data bits ........................................................................................................................ 8
Parity ...................................................................................................................... None
Stop bits .........................................................................................................................1
Flow Control ........................................................................................................... None
SPECIFICATIONS
7
Video Amplifier Bandwidth ................................................................................. 1.65 GHz
Input Video Signal ......................................................................................... 1.2 volts p-p
Input DDC Signal .................................................................................... 5 volts p-p (TTL)
Single Link Range ......................................................................... ...1080p / 1920 x 1200
Input Connector Type .............................................................................................. HDMI
Output Connector Type ............................................................................................HDMI
Remote Control Port ..................................................................................... RJ11 RS232
Power Consumption ................................................................................ 60 Watts (max.)
Power Supply ................................................................................................... 12-24VDC
Dimensions ................................................................................. 17”W x 1.75”H x 7.25”D
Shipping Weight ....................................................................................................... 8 Lbs
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Amplificador de Gefen
Gefen
Gefen EXT-DVI-142DLN Manual de usuario
Gefen
Gefen 1x8 DVI DA Manual de usuario
Gefen
Gefen Super Booster Plus Manual de usuario
Gefen
Gefen EXT COMPAUD 148 Manual de usuario
Gefen
Gefen 2x8 DVI DA Manual de usuario
Gefen
Gefen AUD-148 Manual de usuario
Gefen
Gefen EXT-HDMI-148 Manual de usuario
Gefen
Gefen VDX-600 Manual de usuario
Gefen
Gefen COMPAUD-CAT5-144 Manual de usuario
Gefen
Gefen EXT-HDMI1.3-1410-BLK Manual de usuario
Gefen
Gefen 2x8 DVI DA Manual de usuario
Gefen
Gefen EXT-UHD600A-44 Manual de usuario
Gefen
Gefen EXT-DVI-248 Manual de usuario
Gefen
Gefen EXT-COMPAUD-143 Manual de usuario
Gefen
Gefen ex tend it VDX 600 Manual de usuario
Gefen
Gefen EXT-HDMI-144 Manual de usuario
Gefen
Gefen HDMI-CAT5-148 Manual de usuario
Gefen
Gefen EXT-DVI-2-HDSDIPRO Manual de usuario
Gefen
Gefen EXT-DVI-148 Manual de usuario
Gefen
Gefen EXT-HDMI-CAT5-148 Manual de usuario
