Geemarc CL1100 Manual de usuario
0
CL1100
Amplified Desk Telephone
With Volume And Tone Control
English
1
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and changes
you need to be aware of !!!
INDEX.....................................................................1
DESCRIPTION........................................................2
SETTING UP...........................................................4
- Connecting the telephone.....................................4
- Ringer settings......................................................4
- Dialling types and grounding (UK version)...........5
- Time break recall switch.......................................6
VOLUME AND TONE ADJUSTMENT...................7
- Receiving volume and tone ..................................7
- Sending volume level adjustment.........................8
USING THE PHONE...............................................9
- Answering incoming call.......................................9
- Making a call.........................................................9
- Last number redial................................................9
- Recall, * & # buttons .............................................9
- Mute button.........................................................10
- Storing telephone numbers.................................10
- Dialling stored number........................................11
SAFETY INFORMATION .....................................12
GUARANTEE .......................................................13
RECYCLING DIRECTIVES..................................14
INDEX
2
DESCRIPTION
Direct memory
buttons Flashing incoming
ring indicator Phonebook
insert card
Tone reception
adjustment
Volume reception
adjustment
Extra volume and
tone activation
Memory storing
key
Time break
recall button
Mute button
Last number
redial
3
DESCRIPTION
Sending
level switch
Line cord socket*
Tone / Pulse / Grounding
switch Time break recall switch
(R=100ms/300ms)
Volume & Tone adjustment
ON/OFF switch
Ringer level
adjustment switch
Reception volume
adjustment Reception Tone
adjustment
4
1 - CONNECTING THE TELEPHONE
1. Connect the handset cord.
2. Open the battery compartment by pulling back
the latch.
3. Insert correctly 4 x AAA 1.5V alkaline batteries
(not supplied) in the battery compartment (*).
Batteries are required if you wish to increase
the ringer level up to 10 dB.
4. Snap the battery door back in place.
5. Connect the line cord to the socket (*).
(*) Classified TNV-3 according to EN60950 standard.
2 - RINGER SETTINGS
A switch located on the upper side allows the
ringer to be switched HI, LOW, OFF :
: Off,
: Low,
: Hi
Your phone comes with the ringer switched to
«High» and the melody set to «6»:
Low Mid High
Melody 1 1 2 3
Melody 2 4 5 6 (by default)
Melody 3 7 8 9
SETTING UPSETTING UP
5
If you don’t like the ringer melody, you can
choose a new one by changing the settings as
per instructions below:
- Lift the handset.
- Press button.
- Press # button.
- Press any of the 1 - 9 dial keys.
The new ringer settings will be activated with the
next incoming call.
Note: The ringer level will be increased up to 10
dB if you insert batteries into the battery
compartment.
3 - DIALLING TYPES AND GROUNDING
A switch ETR/PR/T located on the upper side is
equipped on some models. If you wish to connect
your CL1100 to a public UK/French switch-board
(PBX), move switch ETR/PR/T to position 3 (T).
This will ensure optimal compatibility of your
phone with most (99%) PBX.
SETTING UP
6
Positions:
Position 1:
Pulse dialling. The Ris grounded. This option
can be used only within the UK in very special
cases.
Position 2:
Pulse dialling. The R is set according to the
determined adjustment (see «Time Break Recall
Setting for R Function» p.9).
Position 3:
Tone dialling. The R is set according to the
determined adjustment (see «Time Break Recall
Setting for R Function» p.9).
If you are using your CL1100 with a hearing aid, set
your hearing aid to “T” position.
4 -TIME BREAK RECALL SWITCH (300/100)
Check the Time Break Recall setting of your
CL1100. For the UK the Time Break Recall
should be set to 100 mS. It can be switched to
300 mS for other locations or PBX’s.
SETTING UP
7
1 - RECEIVING VOLUME AND TONE
ADJUSTMENT
You can adjust the receiving volume and tone
according to your own hearing requirements.
The button allows extra volume and tone
functions to be activated or deactivated during
the conversation.
Tone and volume adjustment (15dB to 30dB) is
only activated when the switch located at the
upper side of your phone is set to ON. When this
button is set to OFF only the volume can be
adjusted from 0dB to 15dB.
When the function is activated, the red light of
extra receiving and tone function button is
lit.
Note: When the tone (treble), earpiece volume
and sending levels are set to the maximum,
whistling may occur. If whistling occurs the
sending level settings should be decreased with
the switch .
TONE AND VOLUME ADJUSTMENT
8
Adjust the TONE and VOLUME buttons to fit the
levels to your own hearing requirements.
2 - SENDING VOLUME LEVEL ADJUSTMENT
If your voice is quiet or called parties have
difficulty hearing you, you can increase the
sending level volume with the switch located on
the upper side. You can also decrease the
sending volume if required.
TONE AND VOLUME ADJUSTMENT
9
1 - ANSWERING INCOMING CALLS
- When an incoming call is received the phone
will ring and the incoming call indicator will
flash. To answer the call lift the handset and
speak.
- On completion of the call, carefully replace the
handset in the cradle to release the line.
2 - MAKING A CALL
- Lift the handset.
- Await the dial tone and dial required number.
- On completion of the call, carefully replace the
handset in the cradle.
3 - LAST NUMBER REDIAL
- Lift the handset.
- Await the dial tone and press button.
- A previously dialled number will be
automatically redialled (not in use for memory
numbers).
4 - RECALL, * & # BUTTONS
These are used with the new services provided
on digital exchanges. For details please contact
your network operator.
USING THE PHONE
Otros manuales para CL1100
2
Tabla de contenidos
Otros manuales de Teléfono de Geemarc
Geemarc
Geemarc AMPLIDECT 280 Manual de usuario
Geemarc
Geemarc BDP400 Manual de usuario
Geemarc
Geemarc CL1400 Manual de usuario
Geemarc
Geemarc SCREENPHONE Manual de usuario
Geemarc
Geemarc DALLAS10 Manual de usuario
Geemarc
Geemarc Ampli100VM Manual de usuario
Geemarc
Geemarc Ampli550 Manual de usuario
Geemarc
Geemarc CL210A Manual de usuario
Geemarc
Geemarc CL50 Manual de usuario
Geemarc
Geemarc CL330 Manual de usuario
Geemarc
Geemarc APOLLO 10 Manual de usuario
Geemarc
Geemarc PhotoPHONE 100 Manual de usuario
Geemarc
Geemarc T300 Manual de usuario
Geemarc
Geemarc ClearSound 100 Manual de usuario
Geemarc
Geemarc SCREENPHONE Manual de usuario
Geemarc
Geemarc Jupiter 4 Manual de usuario
Geemarc
Geemarc Amplidect Combi 295 Manual de usuario
Geemarc
Geemarc AmpliDECT250 Manual de usuario
Geemarc
Geemarc CL610 Manual de usuario
Geemarc
Geemarc AMPLI600 Manual de usuario
