GE 24922 - Universal Remote Control Manual de usuario

Universal Remote

Instruction Manual

Control Remoto Universal

Manual de Instrucciones

24922

6177

Introduction

Congratulations on your purchase of the GE Universal

Remote Control. The GE Universal Remote Control is

one of the most easy to use remote controls available

today. With the GE Universal Remote Control, juggling

multiple remote controls is a thing of the past!

Your GE Universal Remote Control controls multiple

devices, including the most popular brands of TV,

DVR, DVD, CBL, and SAT. The GE Universal Remote

Control is easy to use, easy to program, and it gives

you total control — at the touch of your ﬁngertips!

IMPORTANT: SAVE THIS MANUAL AND CODE LIST

FOR FUTURE REFERENCE

Introduction..................................................................................... 2

Setup .................................................................................................. 3

Battery Installation............................................................... 3

Battery Precautions.............................................................. 3

Battery Saver........................................................................... 3

Code Saver ............................................................................... 3

Button Functions .......................................................................... 4

Programming Your Remote..................................................... 6

Direct Code Entry................................................................... 6

Auto Code Search ................................................................. 8

Controlling Combo Devices.............................................. 9

Favorite Function ................................................................10

Using Your Remote ....................................................................11

Master Volume Feature....................................................11

Code Identiﬁcation .............................................................12

Reset to Factory Settings.................................................12

Using Shift...............................................................................13

Troubleshooting..........................................................................14

Warranty ........................................................................................15

Table of Contents

Scan this to view remote

setup video

Mira a ver el video de

instalación remota

http://www.jascoproducts.com/remote

Your universal remote requires two (2) AAA batteries

(not included). Alkaline batteries are recommended.

Battery Installation

1. On the back of the remote, slide the cover down to

remove.

2. Match the (+) and (-) marks on the batteries to the

(+) and (-) marks inside the battery compartment,

then insert two (2) AAA batteries. Be sure to use

fresh batteries.

3. Slide the battery cover back into place.

NOTE: If your remote stops operating properly,

replace the batteries with new ones. The remote will

retain the codes you have programmed for up to 10

minutes after the batteries are removed.

Battery Precautions

• Donotmixoldandnewbatteries.

• Donotmixalkaline,standard(carbon-zinc),or

rechargeable (Ni-Cd, Ni-MH, etc.) batteries.

• Alwaysremoveold,weakorworn-outbatteries

promptly and recycle or dispose of them in

accordance with local and national regulations.

Battery Saver

Your remote automatically turns off if the buttons are

depressed more than 8 seconds. This will save your

batteries should your remote get stuck in a place

where the buttons remain depressed (e.g., between

the sofa cushions).

Code Saver

You will have up to 10 minutes to change the

batteries in your remote without losing codes you

have programmed. However, do not press any

buttons until batteries are installed in the remote. If

buttons are pressed without batteries in the remote,

all codes will be lost.

Setup

LAST Returns to

the previously

selected channel.

EXIT ExitsOn-Screen

Menus and/or

Returns to previous

On-Screen selection.

DOT: Used to select

digital channels, e.g., 2.3.

VOLUME UP/DOWN

Changes the volume

level of the device,

normally the TV.

CHANNEL UP/DOWN

Changes the channels.

RECORD, PLAY, STOP,

REW, FF, PAUSE

TV, DVR, CBL, B-RAY,

AMP, AUX

Selects device

to control.

Red Indicator lights when

any button is pressed.

INPUT Selects the video

inputs from available

viewing sources.

Button Functions

UP, DOWN, LEFT & RIGHT

Navigation buttons.

GUIDE Displays satellite

or cable on-screen.

DVR LIST Displays list of

recorded programs

A, B, C, D

Colored ABCD buttons for

menu navigation in DVRs

andsettopboxes

INFO Displays/selects

on-screen channel

information.

MENU Displays the

Menu on the TV.

SETUP Button is used to

program the remote

SHIFT is the alternate

function of this button.

Use the SHIFT button to

access the menu and DVR

list of your device. To enter

the SHIFT mode press

thisbuttononce.Toexit

the shift mode, press the

SHIFT button again.

MUTE Turns off the

TV sound while the

picture remains.

OK Selects menu

items for the device

you are controlling.

NUMBERS

Enter numbers for direct

channel selection. Some

devices require ENTER

to be pressed after

channel selection.

Button Functions, cont.

ON•OFF Turns

devices On or Off.

Fav Allows user to

program up to 10 of

their favorite channels

for quick

Programming Your Remote

Your GE universal remote control is designed to

control multiple audio/video devices such as a TV,

DVD, DVR, satellite, cable and audio device using

only one remote. To use this remote, you will need to

program it to control the devices of your choice. There

are two ways to program the remote - direct code

entry or auto code search.

Direct Code Entry (Recommended)

1. Locate the Remote Code List provided

in this manual. Find the DEVICE

CATEGORY you wish to program (for

exampleTV, DVR, CBL, B-RAY, AMP,

AUX) and then ﬁnd the BRAND of that

device. Circle all the codes under that

brand.Example:ForaGETV,locatethe

TV code section then circle all of the

GE TV codes.

2. Manually turn on the device you wish

to control.

3. Press and hold the SETUP button

until the red indicator light stays on

(approximately2seconds)andthen

release the SETUP button.

4. Press and release the device button on

the remote (TV, DVR, CBL, B-RAY, AMP,

AUX). The red indicator will blink once

and then remain on.

5. Enter the ﬁrst 4-digit code previously

found in the code list using the

number buttons on the remote. If the

code entered is a valid code, the red

indicator light will turn off. If the code

entered is not a valid code, the red

indicator light will ﬂash and remain on

allowing you to re-enter the code.

Note: If no buttons are pressed for 35

seconds, the remote will exit the SETUP

mode and you will have to start over.

Programming Your Remote, cont.

6. Point the remote at the device. Press

the POWER button—if the device

turns off, no further programming is

required for that device. If the device

does not turn off, return to steps 3-5

andusethenextcodefoundinthe

code list. Continue this process until a

code for your device is found.

7. Repeat this process for each device

(forexampleTV,DVR,CBL,DVD,SAT,

AUX) in your home entertainment

system you wish to control.

Programming Notes

• Ifyourdevicedoesnotrespondtotheremoteafter

trying all codes listed or your brand is not listed in

the code list, use the Auto Code Search method to

program your remote.

• Sometimestherstcodethat“works”withyour

device may operate only a few functions of your

device. There may be another code in the code

list that performs more functions. Try other codes

from the code list for more functionality.

• WiththeDirectCodeEntrymethod,youcan

program any device button to control any device

in your home entertainment system.

Forexample,youcanusetheDVR device button

to control an audio receiver or a DVD, VCR, satellite

device, etc.

• Forcombinationdevices,youmayhavetoentera

codeforeachdevice.Forexample,foraVCR/DVD

device, you may have to enter a code for the DVD

under the DVD button and enter a code for the

VCR using a different device button on the remote.

• Writedownthecodefoundtooperateyourdevice

for future reference.

Programming Your Remote, cont.

Auto Code Search

The Auto Code Search, searches automatically

through all of the codes stored in this remote. Read

all the following steps prior to starting the auto code

search as you will need to be prepared to lock-in the

proper code when found.

1. Manually turn on the device you wish

to control.

2. Press and hold the SETUP button

until the red indicator light stays on

(approximately2seconds)andthen

release the button.

3. Press and release the device button on

the remote (TV, DVR, CBL, B-RAY, AMP,

AUX) for device you wish to control.

The red indicator will blink once and

then remain on.

4. Point the remote at the device and

press and release the POWER button

(for TV) or PLAY button (for DVD, VCR,

etc.) to start the search. The red

indicatorwillash(approximately

every 2 seconds) as the remote

searches. Note: The remote must be

pointed at the device for the duration

of this search.

5. Place your ﬁnger on the #1 button so

you are prepared to lock-in the code.

6. When the device shuts off or begins

playing, press the #1 button to lock-in

the code. The red indicator light will

turn off. Note: You have approximately

two seconds after the device shuts off

or begins playing to lock-in the code.

7. Point the remote at the device and

check to see if the remote operates the

device as desired. If it does, no further

programming is required for that

device. If it does not, return to step 2

and start the auto code

search again.

Programming Your Remote, cont.

8. Repeatthisprocessforeachdevice(forexample

TV, DVD, SAT, AUX) in your home entertainment

system you wish to control.

Programming Notes

• Thisprocessmaytakeseveralminutesasthe

remote contains many codes.

• WhenusingtheAutoCodeSearchprogramming

method, the device button corresponding to

the type of device you want to control must be

selected(forexample,theTV device button must

be selected in step 3 if you want to control a TV,

the DVD device button for a DVD player, etc.)

• TheSETUP button can be used during the search

process to reverse the direction of the search of

theremotecodes.Forexample,ifyoumissthe

code for your device and the remote is continuing

to search (as indicated by the blinking red light),

press the SETUP button and the code search will

reverse direction and return to the code.

• Sometimestherstcodethat“works”withyour

device may operate only a few functions of your

device. There may be another code in the code

list that performs more functions. Continue the

auto code search as directed above until the best

code is found.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/

VCR, etc.) will require you to set up two different Mode

buttons to control both parts of the Combo device.

Forexample,ifyouhaveaTV/DVDCombo,youmight

need to set up one code under the TV button to

control the TV part AND a separate code (under any

other Mode button) to control the DVD part.

Favorite Function

Allows user to program up to 10 of their favorite

channels for quick access.

Setup Favorite Function

1. Press and release the device button

(TV, DVR,CBL, B-RAY, AMP, AUX). The

indicator light will blink once. Special

 Note:Usermustselectthedevice

type that controls the channels; for

 exampleifauserhasaCableBox

for controlling channels, then this

device button must be selected to

properly change the channels on

 thecablebox.

2. Press and hold the SETUP button for 2

seconds or until the red indicator light

turns on, then release the SETUP button.

3. Press and release the FAV button.

The red indicator will blink once

and remain on.

4. Press and release the numerical button

(0 – 9) that you will use for storing your

favorite channel. The red indicator will

blink once and remain on.

5. Enter the channel number you wish

 toprogram,forexamplechannel4,

21, 4-1, 52-2.

6. Press and release the FAV button, the

red indicator will turn off. Your

favorite channel is now saved.

7. Process can be repeated for up to 10 of

your favorite channels.

Using Favorite Function

1. Press and release the FAV button. The

red indicator light will turn on.

2. Press and release the programmed

button (0-9). The red indicator will

blink twice and the remote will

send the code for your

pre-programmed channel.

Programming Your Remote

Otros manuales para 24922 - Universal Remote Control

Tabla de contenidos

Idiomas:

Manuales populares de Control remoto universal de otras marcas

Pronto

Pronto Peel Manual de usuario

Radio Shack

Radio Shack Wireless Remote Control System Manual de usuario

AUVIO

AUVIO Universal Home Theater Remote Manual de usuario

Philips

Philips Icon SRU4106 Manual de usuario

THOMSON

THOMSON ROC4309 Manual de usuario

Philips

Philips pm625S Manual de usuario

RCA

RCA RCU600WMS - Universal Remote Control Manual de usuario

Blackweb

Blackweb BWB17AV002 Manual de usuario

Marmitek

Marmitek DoorGuard 300 Manual de usuario

Chunghop

Chunghop RM-L618 Manual de usuario

Anderic

Anderic KTN828 Manual de usuario

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manual de usuario

Medion

Medion E74023 Manual de usuario

intensity

intensity RM02A Manual de usuario

Sky

Sky MY Manual de usuario

RCA

RCA RCU600M - Universal Remote Control Manual de usuario

Savant

Savant SUR-0500 Guía de referencia rápida

GDI

GDI GDI-WT2K Manual de usuario