GE Simon XT V2 Manual de usuario

Security

P/N 466-2266-01 • REV A • ISS 24FEB10

Simon XT V2 User Manual

This document may not be copied in whole or in part or otherwise reproduced without prior

written consent from GE Security, Inc., except where specifically permitted under US and

international copyright law.

Disclaimer The information in this document is subject to change without notice. GE Security, Inc.

(“GE Security”) assumes no responsibility for inaccuracies or omissions and specifically disclaims

any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or

indirectly, of the use or application of any of the contents of this document. For the latest

documentation, contact your local supplier or visit us online at www.gesecurity.com.

This publication may contain examples of screen captures and reports used in daily operations.

Examples may include fictitious names of individuals and companies. Any similarity to names

and addresses of actual businesses or persons is entirely coincidental.

Trademarks and patents GE and the GE monogram are trademarks of General Electric Company.

Other trade names used in this document may be trademarks or registered trademarks of the

manufacturers or vendors of the respective products.

Intended use Use this product only for the purpose it was designed for; refer to the data sheet and user

documentation for details. For the latest product information, contact your local supplier or visit

us online.

FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a residential environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications.

FCC Part 15 registration number: B4Z-910C-SIMON

Part 68. This equipement complies with Part 68 of the FCC rules and the requirements adopted

by the ACTA.

FCC registration number: US: B4ZAK02B55910

Contact information For contact information see our Web site: www.gesecurity.com.

Content

Introduction 3

Using the Simon XT security system 5

Panel controls 5

Simon XT features 7

Home security 8

Exit/entry delay 9

Bypassing sensors 11

Alarms 11

Chimes 12

Latchkey 13

System status 13

Using an offsite phone 14

Touchpads and key fobs 14

How your system communicates 16

Status beeps 16

Alarm sirens 17

Panel indicator lights 17

Trouble beeps 18

Programming 20

System menu 20

Code options 20

Menu navigation 21

Set clock 22

Chime 22

Special chime 23

System tests 24

Revision 24

Contrast 24

System programming 24

Testing 30

Sensor test 30

Communication test 31

System download 32

Reference information 33

Alarm system limitations 33

Simon XT V2 User Manual i

Emergency planning 34

Sensor and module locations 35

Access codes 36

Delays 37

Simon XT system quick reference 37

ii Simon XT V2 User Manual

Introduction

The Simon XT uses wireless technology to warn your family about intrusion, carbon

monoxide and fire. The system communicates with a central monitoring station and

sends voice messages to an offsite phone.

The security system uses sensors that communicate alarms to the control panel

using radio waves.

The system is supervised, meaning that the panel checks the status of each sensor to

detect problems. If the panel detects trouble, it will notify you with displayed and

spoken messages, beeps, and indicator lights on the panel itself.

A Simon XT installation may include any of the devices listed in Table 1 below.

Table 1: Simon XT system components

Component Type Description

Control panel Operates and programs your security system. It

communicates to you through displayed and spoken

messages. The panel can communicate to a central

monitoring station and send voice messages to your offsite

phone.

Remote handheld Controls the security system primarily from within the house.

Simon XT talking

touchpad

Controls the security system primarily from within the house.

Simon XT talking

touch screen

Controls the security system primarily from within the house.

Touchpads

Key fob This keychain touchpad controls the security system from

within or near the outside of your home.

Indoor motion Detects motion in protected indoor area. When motion is

detected, the panel may respond by sounding chimes or an

alarm.

Outdoor motion Detects motion in a protected outdoor area. When motion is

detected, the system may respond by sounding chimes or

turning on outside lights. These sensors are not used for

intrusion detection.

Door/window Detects the opening of a door or window.

Smoke Detects smoke or a significant rise in temperature. They have

a built-in siren that sounds when smoke or a significant rise

in temperature is detected.

Freeze Detects furnace failure. If the inside temperature drops

below 41ºF (5ºC), the sensor will notify the panel. The sensor

will send a restore signal to the panel when the temperature

rises to 50ºF (10ºC).

Sensors

Carbon monoxide Detects carbon monoxide. They have a built-in siren that

sounds when carbon monoxide is detected.

Simon XT V2 User Manual 3

Component Type Description

Personal help

button

A wireless device used for activating police, fire, or auxiliary

alarms through your security system.

You can send commands or instruct your security system through a series of key

presses on the panel, touchpads, or a remote telephone.

Table 2: System communication devices

Device Description

Control panel You can enter commands for your security system through simple key

presses on the panel. Depending on how your system is programmed,

you may need to enter an access code for certain commands. An access

code is a numeric code that allows authorization to operate your security

system.

Remote handheld

touchpad

This touchpad gives you the option to enter commands from any room in

your house. You can enter commands through simple key presses on the

touchpad.

Simon XT talking touchpad The two-way talking touchpad is a wireless device that provides a

convenient option to: arm the system (doors, windows, and motion

sensors), arm the system with no entry delay, disarm the system, activate

a panic alarm to call the central monitoring station in a nonmedical

emergency, check system status, and turn system controlled lights on or

off (all or individual), all while providing voice feedback.

Simon XT talking touch

screen

The two-way talking touch screen is a wireless device that provides a

graphical user interface that allows you to: arm the system (doors,

windows, and motion sensors), arm the system with no entry delay,

disarm the system, activate a panic alarm to call the central monitoring

station in a nonmedical emergency, check system status, and turn system

controlled lights on or off (all or individual), all while providing voice

feedback. The touch screen also provides trouble beeps, entry/exit beeps

and alarm sounds (Fire, Aux, Police).

Key fob Key fobs are handy for simple arming and disarming control functions.

They are portable and can be carried offsite in a purse or pocket.

Telephone Touchtone telephones can be used to communicate with your system

while you are offsite. Ask your installer if you have this feature.

Note: The default master code is 1-2-3-4 when the security system is shipped from

the factory. You should change your code after your system is installed.

4 Simon XT V2 User Manual

Using the Simon XT security system

You can operate the self-contained security system through several different

methods:

• Use the front panel buttons to arm/disarm the system when you enter or exit your

home and to determine which sensors are active and the system status.

• Use the three fast action keys to communicate with the central monitoring station

to report emergency (auxiliary), police, or fire alarms.

• Use a combination of the panel buttons and the display menu to program certain

user features. This method is used by your installer to establish your system

configuration. (See “Programming” on page 20.)

Panel controls

The self-contained panel provides the user interface for system operation and

programming system functions.

Simon XT controls

Simon XT

123

456

789

Table 3 on page 6 provides a description of the panel keys and display.

Simon XT V2 User Manual 5

Table 3: Panel keys and features

Control Description

Piezo siren Provides alarm beeps and status beeps.

LCD display Provides a 2 x 16 character array that displays a variety of phrases

and icons.

Scroll up/scroll down arrows Press to scroll through lists of similar items.

OK Press to select a particular menu item or commit to panel memory a

menu item that has just been programmed.

Doors+Windows Press to arm perimeter sensors.

Motions Press to arm interior sensors.

Disarm Press to turn off intrusion/burglary protection for your system. Only

intrusion/burglary sensors are disarmed. Environmental sensors, such

as smoke and carbon monoxide detectors, stay active at all times.

Status Press to determine system status.

Silent Press to silence exit beeps when arming.

Bypass Press to bypass a sensor.

Emergency (cross)

Police (shield)

Fire (flame)

Press and hold for 2 seconds (or press twice quickly) to call the central

monitoring station and notify them of a nonmedical call for help.

Microphone Use to communicate with the central monitoring station after an

alarm.

Numeric keypad Press the keys (0 through 9, *, #) to enter access codes or other

numerical data.

* (light bulb) Press to turn lights on. (Contact GE Security for required equipment

information.)

# (dark light bulb) Press to turn lights off. (Contact GE Security for required equipment

information.)

Speaker Provides voice output and sounds key beeps.

Standard text display

While the panel is idle, the text displays:

Display line 1 Arming level

Display line 2 HH:MMx (Time) and status icons

Arming level text could be one of the following:

• Subdisarmed

• Disarmed

• Doors+Windows

6 Simon XT V2 User Manual

• Motions

• Doors+Windows and Motions

The phrase “no delay” is appended to the arming level when no entry delay is active.

Possible status icons include:

• Chime (solid bell)

• Special chime (outlined bell)

• Latchkey on (key)

LEDs

Every key on the front keypad has an LED behind it, except for the scroll arrow keys.

There are four status LEDs behind the row of keys below the LCD display. These

status LEDs indicate the arming level. There is one status LED behind the OK button.

This status LED is lit when there are no open sensors in the system. All other LEDs are

controlled as a group and provide backlighting for the keypad for 30 seconds after a

key is pressed.

Simon XT features

The Simon XT features provide you with the ability to perform the following functions:

• Arm perimeter (doors and windows) and interior (motion) sensors to indicate

intruders.

• Use one button to send quick response alerts to the central monitoring station.

• Access the system from a key fob (similar to the one used for your car).

• Access the system from a remote telephone.

• Disable sensors so you can leave a window open while the system is armed.

• Get an audio alert when a protected door is opened while the system is disarmed.

• Have the system notify you if your children do not arrive at home by a

predetermined time.

Simon XT V2 User Manual 7

Home security

The Simon XT allows you to control which sensors are active at any given time.

Table 4 below describes the arming levels that you can set from the control panel.

Table 4: Arming levels

Level Function Description

0 Subdisarm If your system includes 24-hour protection sensors, you must

subdisarm the panel before accessing these areas to avoid

causing an alarm. Environmental sensors (such as smoke or

carbon monoxide detectors detectors) stay active at all times.

1 Disarm In this level, only 24-hour sensors are active. Environmental

sensors (such as smoke or carbon monoxide detectors

detectors) stay active at all times.

2 Arm door and window

sensors (exterior)

This level arms the door and window sensors, while leaving the

interior motion sensors disarmed.

3 Arm motion sensors (interior) This level arms the interior motion sensors, while leaving the

exterior door and window sensors disarmed.

4 Arm doors/windows and

motion sensors

This level arms all sensors.

Arming/disarming

Arming a sensor makes it active and allows the panel to generate an alarm when a

door or window is opened or when an unauthorized person enters a specific area.

Disarming makes the sensor inactive in the system. The current arming level is shown

on the panel display and changes in arming level are announced on the speaker.

To subdisarm (level 0):

1. Enter the master code while the system is disarmed.

The panel displays and speaks Subdisarmed, the Disarm button blinks, and the

panel beeps once.

2. When you finish accessing the temporarily unprotected areas, press Disarm to

return to the disarmed level.

To disarm (level 1):

1. Press Disarm.

2. Enter your code when the display shows Enter Code.

The panel displays and speaks Disarmed, the Disarm button lights up, and the

panel beeps once.

8 Simon XT V2 User Manual

Tabla de contenidos

Otros manuales de Sistema de seguridad de GE

GE CareGard Manual de usuario

GE 8RP Board Instrucciones de montaje

GE Concord 4 Manual de instrucciones

GE Choice-Alert 45136 Manual de usuario

GE 45235 Manual de usuario

GE AS272 Manual de usuario

GE 45411 Manual de usuario

GE 60-960-95 Manual de usuario

GE Interlogix 60-875 Simon Manual de usuario

GE Silent Alert 45137 Manual de usuario

GE 45131 Manual de usuario

GE 60-806-95R-16Z - Security Concord Express System Control... Manual de usuario

GE Concord 4 Series Manual de usuario

GE Security Pro 7000 Manual de usuario

GE BA300 Manual de capacitación

GE SmartCom CC-SCRS01 Manual de usuario

GE Simon XTi Manual de usuario

GE TX-7201-05-1 Manual de usuario

GE ARITECH AS399 Manual de usuario

GE SIMON XT Manual de instrucciones

GE JSC1300 Manual de usuario

GE 600-1021-95R Manual de usuario

GE 45232 Manual de usuario

GE 45133 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario