GE TLE Scalable 150 Manual de usuario

Logix Series Quick Start Guide

150

Stainless Steel Control Valve

Progra mming Your Control

General Program Reference Guide

To Change a Value:

• Use or to select value to change.

• Then press until value blinks.

• The use or to scroll through value

options.

• Then press to enter value.

NOTE: A locked value ( ) cannot be changed until it is

unlocked.

To Star t Manual Regeneration:

• Press for regeneration today .

• Hold for 5 seconds for immediate regeneration.

During a Regeneration:

• Press or or to view current cy cle

time remaining.

• Press AND to advance cy cles.

• Hold AND for 5 seco nds to cancel

regeneration.

To Program Individual Cy cle T imes:

Note: Only required to override current settings.

• Hold AND for 5 seco nds.

• Then use or to scroll through cycles.

C1= Backwash

C2 = Regenerant Draw

C3 = Slow Rinse

C5 = Fast Rinse

C8 = Regenerant Refill

• Then press until value blinks.

• Then use or to scroll.

• Then press to enter value.

Setting the 7-Day Clock (742 and 742F only)

• Set the Days Override to "0".

• W ith arrow on “Regen Time/Day, press until

arrow flashes under desired day of week.

• Then use or until black bar is displayed

indicating regeneration that day.

• Press to advance to next day.

To Reset the Valve Type:

NOTE: All values are reset to factory defaults.

• Hold AND for 5 seco nds.

• When “HO” is displayed, hold for 5 seconds.

• Then press or to change valve type.

• Then press to enter displayed valve type.

SET

DOWN

REGEN

LOCKED VALUE

Time& Day

RegenTime & Day

Salt

SU MO TU WE TH FR SA DAYS

LBS

MIN

x100

Capacity

Hardness

Control:

Syst em Type:

Use Page:

762

Time/Day

Regeneration Time/Day

Salt Amount

Capacity

Hardness

4-Cycle

Conditioner

742

Time/Day

Regeneration Time/Day

Salt Amount

Capacity

4-Cycle

Conditioner

762F

Time/Day

Capacity

Backwash Time/Day

Backwash Length

3-Cycle

Filter

742F

Time/Day

Backwash Time/Day

Backwash Length

3-Cycle

Filter

Regeneration StartMetered Clock or Remote Signal Metered Clock or Remote Signal

Identify your control

by matching the

display text to the

guide

150 Quick Start

Grains/gal:3

200

SU MO TU WE TH FR SA DAYS

Lbs/ft3

SU MO TU WE TH FR SA DAYS

Time/Day

Salt Amount

SU MO TU WE TH FR SA DAYS

Capacity

Hardness

Time/Day

Regeneration Time/Day

Salt Amount

SU MO TU WE TH FR SA DAYS

Capacity

Hardness

1. Valve Type

 Select 150 for 4-Cycle Single tank conditioner

 Select 2150 for 4-Cycle Twin-Alternating conditioner

2. Resin Volume

Select correct resin volume Cubic feet: 3.00

17.00

3. Time of Day (12 hr.)

Set to actual time of day

Note: Setting includes PM indicator.

4. Day of Week

Set to actual day of the week

5. Time of Regeneration

Set to desired time of regeneration

Note: Time of Regeneration is ignored for Twin-alternating.

6. Days Override

Leave at 0 to disable

Set to desired days override

7. Salt Dosage

Set to desired dosage

lbs per cubic feet of resin

8. Capacity

Estimated exchange capacity

calculated by Logix control

Use to OVERRIDE calculated

capacity

9. Hardness

Set to actual water hardness

Screen Buttons to Description Range

Press

Lbs/f

: 3

Kilograins:1

9999

Programmming is complete

press

then

press

then

press

then

press

then

press

then

press

then

press

then

press

then

press

then

to override

Service Display

Toggles between Capacity Remaining

(gallons or m ) and Flow Rate (g/m

or L/m)

150 Demand 762 4-Cycle Conditioner

Max. Days

Between Regen:

In Service LED is On

In Service

Grams/Liter: 30

2000

grams/Liter: 50

290

Kilograms:0.1

999.9

Liters:75

500

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Time/Day

Salt Amount

Capacity

Hardness

Regeneration Time/Day

SU MO TU WE TH FR SA DAYS

2. Resin Volume

Select correct resin volume Cubic feet: 3.00

17.00

3. Time of Day (12 hr.)

Set to actual time of day

Note: Setting includes PM indicator.

4. Day of Week

Set to actual day of the week

5. Time of Regeneration

Set to desired time of regeneration

6. Days Between Regeneration

Set to desired days between

regeneration

Set at 0 to program as a 7-day

timer

7. Salt Dosage

Set to desired dosage

8. Estimated Exchange Capacity (view only)

Based on resin volume and

salt setting

Screen Buttons to Description Range

Press

Days:0

Lbs/ft3:3

Programmming is complete

press

then

press

then

press

then

press

then

press

then

press

then

press

then

press

Service Display

Displays actual day of the week

and time of day

150 Time Clock 742 4-Cycle Conditioner

1. Valve Type

 Select 150 for 4-Cycle Single tank conditioner

 Select 2150 for 4-Cycle Twin-Alternating conditioner

Time/Day

Salt Amount

SU MO TU WE TH FR SA DAYS

Capacity

In Service LED is On

In Service

Grams/Liter: 50

290

Liters:75

500

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Time/Day

Salt Amount

Capacity

Lbs/ft3

Time/Day

Salt Amount

Capacity

Regeneration Time/Day

SU MO TU WE TH FR SA DAYS

Time/Day

SU MO TU WE TH FR SA DAYS

Capacity

SU MO TU WE TH FR SA DAYS

2. Program Type

Select "F"

3. Time of Day (12 hr.)

Set to actual time of day

Note: Setting includes PM indicator.

4. Day of Week

Set to actual day of the week

5. Time of Backwash

Set to desired time of backwash

Note: Time of Backwash is ignored for Twin-alternating.

6. Days Override

Leave at 0 to disable

Set to desired days override

7. Backwash Length (minutes)

Set to desired backwash length

8. Capacity (gallons)

Set to desired capacity in

Screen Buttons to Description Range

Press

Minutes:1

250

Gallons:1

x 100

9999

Programmming is complete

press

then

press

then

press

then

press

then

press

then

press

then

press

then

Backwash Time/Day

Backwash Length

MIN

X100

150 Demand 762F - 3-Cycle Filter

1. Valve Type

 Select 153 for 3-Cycle Single tank filter

 Select 2153 for 3-Cycle Twin-Alternating filter

Max. Days

Between Regen:

m3:1

999.9

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Time/Day

Capacity

Backwash Time/Day

Backwash Length

SU MO TU WE TH FR SA DAYS

Service Display

In Service

Time/Day

Capacity

Backwash Time/Day

Backwash Length

Toggles between Capacity Remaining

(gallons or m ) and Flow Rate (g/m

or L/m)

In Service LED is On

Time/Day

SU MO TU WE TH FR SA DAYS

2. Program Type

Select "F"

3. Time of Day (12 hr.)

Set to actual time of day

Note: Setting includes PM indicator.

4. Day of Week

Set to actual day of the week

5. Time of Backwash (12 hr)

Set to desired time of backwash

6. Days Between Regeneration

Set to desired days between

regeneration

Set to 0 to program as a 7-day

timer

7. Backwash Length (minutes)

Set to desired backwash length

Screen Buttons to Description Range

Press

Days:0

Minutes:1

250

Programmming is complete

press

then

press

then

press

then

press

then

press

then

press

then

Service Display

Displays actual day of week and

time of day.

Backwash Time/Day

Backwash Length

MIN

150 Time Clock 742F - 3-Cycle Filter

1. Valve Type

 Select 153 for 3-Cycle Single tank filter

 Select 2153 for 3-Cycle Twin-Alternating filter

In Service LED is On

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Time/Day

Backwash Time/Day

Backwash Length

Printed in U.S.A. P/N 3017534 Rev. B

Este manual sirve para los siguientes modelos

Otros manuales de Unidad de control de GE

GE RX3i PROFINET Manual de usuario

GE VersaMax IC200CHS006 Manual de usuario

GE IC3645SR7T405T5 Manual de usuario

GE C-800 Series Manual de usuario

GE VME DLAN Manual de usuario

GE PACSystems RX3i IC695ETM001-JW Manual de usuario

GE 22158 Manual de usuario

GE NetworX Series Manual de usuario

GE Multilin MM300 Manual de usuario

GE VARIVENT S Series Manual de usuario

GE MiCOM P40 Agile Manual de usuario

GE GEH-5201 Manual de usuario

GE IC3645SR4W746HL1 Manual de usuario

GE EntelliGuard TU Manual de usuario

GE MiCOM P40 Agile Manual de usuario

GE C-400 Series Manual de usuario

GE NetworX Series Manual de instalación

GE Baker Hughes 2900-40 Series Manual de usuario

GE L60 Manual de usuario

GE IC3645SR4W746N5 Manual de usuario

GE ATS7200 Manual de usuario

GE Baker Hughes Masoneilan 31000 Series Manual de usuario

GE Masoneilan 48000 Series Manual de usuario

GE Spectra Series Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario