GCC Technologies Jaguar IV Series Manual de usuario

Jaguar IV Series

User Manual

http://www.GCCworld.com

V.6 2012 Mar.

NOTICE

GCC reserves the right to modify the information contained in this user

manual at any time without prior notice; un-authorized modification, copying

distribution or display is prohibited. All comments, queries or

suggestions concerning this manual please consult with your local dealer.

JaguarIVUserManual

ImportantInformation

Important Information

Thank you for purchasing the GCC Jaguar IV Cutting Plotter.

Before you use the cutting plotter, please make sure that you have read the

safety precautions and instructions below.

Caution

!SAFETY PRECAUTIONS!

¾For safety concern, please always hold the cutter firmly from the bottom while moving

it. Do not move the cutter by clasping the depression area on both sides.

O (Correct) X (Incorrect)

¾Do not shake or drop the blade holder, a blade tip can fly out.

¾During an operation, do not touch any of the moving parts of this machine (such as the

carriage). Also be careful to make sure that clothing and hair do not get caught.

¾Always connect the power cable to a grounded outlet.

¾Always use the accessory power cable which is provided. Do not wire the power cable

so that it becomes bent or caught between objects.

¾Do not connect the power cable to branching outlet to which other machines are also

connected, or use an extension cable. There is danger of overheating and of

mis-operation of the machine.

¾Keep the tools away from children where they can reach.

¾Always put the pinch rollers within the white marks.

JaguarIVUserManual

ImportantInformation

Warning

Never press the top release grip and pull the bottom release grip at the same time as

the pictures shown below:

O (CORRECT) ╳(INCORRECT)

Press down

DISABLE

Press down

Stop bar

ENABLE

Note:

In case the grips clipped

together due to your

wrong operation, please

use a tweezers to pull

out the stop bar when

pressing down the top

Pull up bottom to release grip

release grip. Keep the

stop bar outside then

release the grips as the

right figure.

Jaguar IV User Manual

Table of Contents

Important Information

1. General Information

1.1 Introduction 1-1

1.2 PackageItems 1-1

1.3 Product Features 1-2

1.4 Appearance of Jaguar IV

1.4.1 TheFrontView 1-3

1.4.2 TheBackView 1-3

1.4.3 The Whole View 1-4

1.4.4 The Left-hand Side 1-4

1.4.5 The Right-hand Side 1-5

2. Installation

2.1 Precaution 2-1

2.2 Stand & Flexible Media Support System 2-2

2.3 DesktopFlexible Media Support System 2-6

2.4 BladeInstallation 2-8

2.5 Cable Connections

2.5.1 USBInterface 2-10

2.5.2 ParallelInterface 2-13

2.5.3 RS-232 Interface 2-13

2.5.4 DataTransmitting 2-13

3. The Control Panel

3.1 The LCD Panel 3-1

3.2 Menu in On-line Mode 3-2

3.3 Menu in Off-line Mode 3-3

3.4 Menu Items 3-4

4. Operation

4.1 Media Loading

4.1.1 Loading the Sheet Media 4-1

4.1.2 Loading the Roll Media 4-3

4.2 Tracking Performance 4-5

4.3 Cutting Force and OffsetAdjustment 4-7

4.4 HowtoCut3mmLetter 4-8

4.5 How to Make A Long Plot 4-8

4.6 When Completing the Cutting Job 4-9

4.7 Jaguar IV Print Driver setting 4-10

4.7.1 Option Page 4-10

4.7.2 Paper Page 4-12

5. Accu-Aligning System

5.1 Introduction 5-1

5.2 Calibrating the System 5-2

5.2.1 Media Calibration 5-2

5.2.2 AAS Calibration 5-2

5.2.3 AAS II on Jaguar IV 5-3

Jaguar IV User Manual

Table of Contents

5.3 Printer Test 5-4

5.4 Contour Cutting 5-6

5.5 TipsforAAS 5-8

6. Maintenance

6.1 Cleaning the cutting Plotter 6-1

6.2 Cleaning the Grid Drum 6-2

6.3 Cleaning the Pinch Rollers 6-2

7. Trouble Shooting

7.1 Non-Operational Problems 7-1

7.2 Operational Problems 7-2

7.3 Communication Problems 7-3

7.4 SoftwareProblems 7-4

7.5 Cutting Quality Problem 7-5

7.6 USB connection Problems 7-6

Appendix

A-1 Jaguar IV Specification A-1

A-2 Blade Specification A-2

A-3 CorelDRAWPlug-InInstruction A-3

A-4 SignPal8.5Instruction A-4

A-5 EasySIGN Instruction A-5

A-6 GreatCut Instruction A-6

A-7 Illustrator Instruction A-7

Jaguar IV User Manual

GeneralInformation 1-1

1.1 Introduction

Jaguar IV series cutting plotters have been designed to produce computer-generated images

or perform contour cutting on sheets or rolls of vinyl media.

This manual covers the following models of Jaguar IV series cutting plotters:

‧J4-61 for media width: 50mm(1.97”) ~ 770mm(30.3”)

‧J4-101S for media width: 50mm(1.97”) ~ 1270mm(50”)

‧J4-132S for media width: 50mm(1.97”) ~ 1594mm(62.7”)

‧J4-183S for media width: 300mm(11.8”) ~ 1900mm(74.8”)

1.2 Package Items

The package of the Jaguar IV model contents the items listed below, please check carefully.

If you find any item missing, please consult your local dealer for further assistance.

1. Cutting Plotter 1

2. Stand Set ( for J4-101S/132S/183S only )(Optional for J4-61)

z2 piece of T-shape stand

z1 piece of stand beam

z18 pieces of M6 screws

z1 piece of M5 L-shape hexagon screw driver

z1 piece of Installation Guide for Stand Set

3. Flexible Media Support System Package

Items S 1183S/132S/101 6

1 set of Roll Media Flange (2 pieces) V V

1 set of Roll Holder (2 pieces) V V

1 set of Roll Holder Guide Bushes (4 pieces) V V

1 set of Roll Holder Support (2 pieces) V V

1 piece of M6 L-shape hexagon screw driver V V

1 piece of Installation Guide for Roll Holder V

1 piece of M5 L-shape hexagon screw driver V

1 set of Desktop Support Brackets (2 pieces) V

4 pieces of Plastic Foot V

4 pieces of M4 screws V

12 pieces of M6 screws V

1 piece of M4 L-shape hexagon screw driver V

1.GeneralInformation

Jaguar IV User Manual

GeneralInformation 1-2

4. Accessories

z1 piece of User’s Compact Disk

z1 piece of AC power Cord

z1 piece of data cable (RS-232C)

z1 piece of data cable (USB cable)

z1 set of Blade Holder Assembly (Installed in tool carriage of the cutting

plotter)

z1 piece of Blade (Installed in Blade Holder)

z1 piece of Safe Blade

z1 piece of Cutting Pad for Vinyl cutting

z1 piece of Tweezers

z1 piece of Promise Card

1.3 Product Features

The following are the main features of the Jaguar IV series cutting plotters:

‧Tri-port connectivity provides you with greater flexibility

‧Up to 600-gram cutting force

‧Up to 60-inch/per second cutting speed

‧Guaranty 10-meter tracking

‧User friendly, multi-language control panel

‧Ingenious media basket (optional item)

‧Enhanced Accu-Aligning System for automatic contour cutting

Jaguar IV User Manual

GeneralInformation 1-3

1.4 Appearance of Jaguar IV

1.4.1 The Front View (Figure 1-1)

Control panel – consists of 14

control keys and 1 LED and 1 LCM

showing messages and menus.

Cutting Pad –provides the

protection of blade when the blade is

cutting.

Tool Carriage – performs the

cutting with the installed blade

and

en with AAS module.

Slicer Groove –

slice off the extra

media easily along

this groove.

Platen – provides the

surface for holding and

supporting media while

performing cutting.

Grid Drums – move

the media back and

forth during operation.

Alignment Rulers –

media can be aligned

with the clear guide line

marks.

Figure 1-1

1.4.2 The Back View (Figure 1-2)

Figure 1-2

Lever –

raises or lowers the

pinch rollers.

Pinch Rollers –

hold the media during

cutting.

Jaguar IV User Manual

GeneralInformation 1-4

1.4.3 The Whole View of Jaguar IV (Figure 1-3)

Roll Holder – holds

and supplies the roll

media for cutting.

Roll Holder Guide

Bushes –serve to

keep the roll media in

place when media is

pulled from the roll.

Roll Holder

Support – supports

roll holders.

T-Stand –supports

the cutting plotter

Stand Beam –

stabilizes the body.

Figure 1-3

T-Stand –supports

the cutting plotter

Otros manuales para Jaguar IV Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Trazador de GCC Technologies

GCC Technologies

GCC Technologies EXPERT 24 LX Manual de usuario

GCC Technologies

GCC Technologies P3-60 Manual de usuario

GCC Technologies

GCC Technologies Jaguar V Series Manual de usuario

GCC Technologies

GCC Technologies puma iii series Manual de usuario

GCC Technologies

GCC Technologies Jaguar II Series Manual de usuario

GCC Technologies

GCC Technologies Jaguar IV Series Manual de usuario

GCC Technologies

GCC Technologies EXPERT 24 LX Manual de usuario

GCC Technologies

GCC Technologies Expert 52 Manual de usuario

GCC Technologies

GCC Technologies AR-24 Manual de usuario

GCC Technologies

GCC Technologies J5 Series Manual de usuario

GCC Technologies

GCC Technologies RX II Series Manual de usuario

GCC Technologies

GCC Technologies EP-60 Manual de usuario

GCC Technologies

GCC Technologies Puma Series Manual de funcionamiento

GCC Technologies

GCC Technologies BENGAL Manual de usuario

GCC Technologies

GCC Technologies EXPERT 24 Manual de usuario

Manuales populares de Trazador de otras marcas

MUTOH

MUTOH Kona 760 Manual de usuario

HP 7475a Manual de usuario

Vulcan-Hart

Vulcan-Hart FC-500VC Manual de usuario

Roland

Roland TrueVIS VG-640 Manual del propietario

Furuno

Furuno RP-180 Manual de usuario

Roland

Roland VersaCamm SP-540V Manual de usuario

MIMAKI

MIMAKI CF2 Series Manual de usuario

Ioline

Ioline Summit Manual de usuario

Summa

Summa S CLASS Manual de usuario

Gerber Technology

Gerber Technology GERBERplotter MP Series Manual de usuario

Furuno

Furuno RP-17 Manual de usuario

HP 7470A Manual de usuario

SII

SII LP-1010 Manual de usuario

Great Computer

Great Computer JII-61 Manual de usuario

Roland

Roland VersaUv LEF - 12i Manual de usuario

Lectra

Lectra Alys 120 Manual de usuario

MUTOH

MUTOH Ultima SC-850D Manual de usuario

Skycut

Skycut D Series Manual de usuario