GBC Auto+200M Manual de usuario

S H R E D D E R S

™

Instruction Manual

www.accobrandsasia.com

A U T O + 200X&200M™

2min

200X

200

300X

200

200X

200

200X

200

300X

200

300X

200X

200

200X

200

A U T O + 200X&200M™S H R E D D E R S

autofeed technology

auto-feed chamber and up to 6 - 7 sheets through the manual feed slot. The auto-feed mechanism

The Auto+ 200X and 200M has been designed to automatically shred up to 200 sheets from the

has been designed to handle paper fastened with staples and paper clips and to only pull a few

sheets of paper into the cutting mechanism to minimise the risk of paper jams.

Sheet capacity:

Manual feed slot

7 sheets (80gsm)

Sheet capacity:

Autofeed chamber

200 sheets (80gsm)

Duty Cycle 12 min ON / 40 min OFF

Run time from cold 14 minutes

Volts / Hz UK Version: 230V / 50Hz

EK Version: 220V / 60Hz

Amperage UK Version: 1.2 Amps

EK Version: 1.2 Amps

Motor Watts UK Version: 270 Watts

EK Version: 300 Watts

Sheet capacity:

Manual feed slot

6 sheets (80gsm)

Sheet capacity:

Autofeed chamber

200 sheets (80gsm)

Duty Cycle 5 min ON / 30 min OFF

Run time from cold 15 minutes

Volts / Hz UK Version: 230V / 50Hz

EK Version: 220V / 60Hz

Amperage UK Version: 1.5 Amps

EK Version: 1.5 Amps

Motor Watts UK Version: 350 Watts

EK Version: 350 Watts

technical specifications

GBC Auto+ 200X GBC Auto+ 200M

To guard against injury, the following basic safety precautions must be observed in the set-up of this

product.

• Ensure the machine is plugged into an easily accessible power outlet, and ensure the cable is not

likely to trip up a passer by.

•

supplier.

• Unplug your shredder before moving it or when it is not in use for an extended period of time.

• Do NOT operate with a damaged power supply cord or plug, after it malfunctions, or after it has

been damaged in any manner.

•

• The socket-outlet should be near the equipment and should be easily accessible.

•

• Do NOT use near water.

• Do NOT use aerosol dusters or cleaners.

• Do NOT spray anything into the shredder.

• Do NOT load the auto-feed chamber with unopened junk mail, magazines, bound documents etc.

Although this shredder has been designed to comply with UL 60950-1 EN 60950-1 safety standards

including the “probe accessibility tests”, do not operate the shredder near children or pets.

points to note

Cool Down indicator – This means

the machine is cooling down.

warning symbols

This means no aerosols.

This means keep children away

from shredder.

This means you should be careful

because long hair can become

entangled in the cutting head.

This means don’t reach into the

feed opening of the cutting head.

This means be careful of loose

jewellery which could become

entangeld in the cutting head.

This means no oil lubrication,

use Rexel oil sheets only.

This means be careful of ties and

other loose clothing which could

become entangled in the cutting

head.

This means the shredder can

accept small paperclips.

This means the shredder can

accept small staples.

Safety First

Sheet capacity of manual feed

entry slot.

control panel and indicators

Continuous Jam BoostReverse Auto

This means the shredder can

accept credit cards.

Bin Full indicator – This means the

bin is full.

Paper Loading Door/Bin Door

Open indicator –

This means either:

• Loading door is open

• Bin is open

Lock indicator – This means the

paper loading door is locked (during

shredding).

Paper jam indicator – This means

there is a paper jam in the auto feed

chamber.

If this symbol is flashing the

shredder is attempting to clear a

paper jam automatically.

If this symbol is permanently

illuminated red please follow the

instructions under ‘Reverse function’

to clear any jammed material.

Auto+ 200X/200M shredding capability

Auto+ 200X/200M CAN shred the following:

•200 sheets

• Stapled paper, 25mm within the corner

• 26/6 and 24/6 or smaller staples

• Small sized paper loaded centrally

•200 sheets

• Paper clip paper, 25mm within the corner.

• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)

• >80/100gsm paper (through manual feed slot ONLY)

• A3 folded in half max. 2 sheets

• 200 sheets

• 80 gsm paper

- A4 - 210mm x 297mm

- A5 - 148mm x 210mm

- A3 single sheet folded in half to make A4

Auto+ 200X/200M CAN shred (through the manual feed slot):

Thick paper or

card.

Multiple folded

sheets (e.g. A3

sheets folded in

half).

Unopened mail

(e.g. junk mail).

Glossy paper or

a sheet covered

with print on both

sides.

Auto+ 200X/200M CANNOT shred the following:

Large clips.

Check the length

of the paperclip

is not longer than

32mm.

Heavy duty

staples. Check

the staple leg

length is not

greater than

6mm.

Bound

documents

Bulldog clips

Magazines or

other documents

bound by multiple

staples or clips.

Adhesive labels.

Plastic sheets,

laminated

documents,

plastic folders.

A U T O + 200X&200M™S H R E D D E R S 7

intelligent help

1In the unlikely event of the shredder jamming, the Auto+ 200X & 200M will stop shredding,

and the jam icon will blink in orange.

2The shredder will illuminate the FWD ( ) and REV ( ) buttons in the sequence necessary

to clear the jam.

3If the jam cannot be intelligentally cleared, the jam icon ( ) will illuminate in red. At this

point follow the reverse function instructions to clear any jammed material.

bin or loading door open safety function

As a safety precaution, if the bin or loading door is opened during shredding, the shredder will stop

and the bin full indicator will illuminate ( ).

automatic jam clearance

Intelligent Jam Clearance: In the unlikely event of the shredder jamming, the Auto+ 200X and 200M

will automatically reverse and forward the engine three times to clear a jam. During this operation

the Paper Jam indicator will flash ( ).

1. operation

1After unpacking the product, remove the CD shard tray which sits inside the shredder bin.

Store this tray on the product as shown and use when you shred CDs.

2Connect the shredder to mains supply.

3Ensure the ON/OFF button on the back of the machine is in the ON position, which will

illuminate the blue standby symbol ( ).

4To commence shredding, press the Auto button ( ), which sets the shredder into auto mode.

You are now ready to shred.

5To load the shredder, simply lift the loading door handle to open the loading door and insert

documents. You can open the door further to 90 degrees for easier access if required. Load up

to 200 sheets at a time into the feed chamber. Do not fill above the 200 MAX level, this could

damage the shredder.

6The shredder will start the shredding cycle automatically ONLY after closing the loading door.

If there is still paper in the Autofeed chamber after first attempt, open and re-close the paper

loading door a second time.

7If you only have up to 6/7 sheets to shred, you can use the manual feed slot, provided the auto

feed chamber is empty.

8Insert paper to be shredded into the feed area.The shredder will detect the paper and start

automatically.

9If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will

automatically turn back to sleep mode in order to save power.

10 The shredder will automatically ‘wake up’ from sleep mode when paper is inserted into the

shred mouth or you open the loading door. There is no need to press the Auto button ( ).

A U T O + 200X&200M™S H R E D D E R S

2. reverse function

1Should you wish to reverse paper out whilst shredding, a reverse button ( ) has been fitted for

your convenience.

2Reverse the paper out then turn the machine off using the ON/OFF switch at the rear of the

shredder. Remove the paper from the manual feed slot (if being used) or open the loading door,

remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.

3To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder.

Return the switch to the auto position ( ).

5. bin full

The shredder will not function when the bin is full and the bin full symbol ( ) is illuminated.

You should empty the bin.

• Pull open the bin slowly to empty.

• Push the empty bin back into place and press the auto button to resume shredding.

3. CD/DVD shredding

A separate CD/DVD tray is provided to collect the shredded CD/DVD shards, ensure that this is

correctly mounted onto the bin before shredding.

1Lift up the paper loading door.

2Always insert CDs/DVDs in the CD/DVD slot. Only shred one CD/DVD at a time.

3Close the paper loading door.

4Empty the CD/DVD bin after 8 CDs/DVDs to avoid waste spilling over into the paper waste bin.

5Remove the CD/DVD tray before recommencing to shred paper and store on the back of the

shredder.

GBC encourages customers to recycle shredded paper.

Please note that shredded paper cannot be recycled if mixed with credit card shards.

If recycling, please separate shredded paper and credit cards.

4. credit card shredding

The Auto+ 200X and 200M can shred credit cards. Switch the shredder to auto mode, then;

1Lift up the paper loading door.

2Insert the credit card into the roller as shown. Only shred one credit card at a time.

3Close the paper loading door.

6. self-cleaning cutters

After emptying and replacing a full bin, the shredder will run in forward for 4 seconds, stop for

2 seconds and then reverse for 4 seconds to clear away any remaining paper from the cutter

mechanism. This unique ‘self-cleaning’ mechanism is additional jam prevention technology

from GBC.

over heating

If the Auto+ 200X and 200M is used continuously for over 14-15 minutes the shredder may overheat

and the cool down incicator will flash red ( ). Please allow the shredder to cool down. When

the shredder is ready to be used the thermometer symbol will no longer illuminate. If the shredder

needs to cool down while shredding, no action is needed. The shredder will automatically restart

shredding paper once it has cooled down after periods of continuous use. All you need to do is

ensure paper is loaded into the chamber and the bin is empty when the machine is cooling down.

lubrication of the shredder

Only use Rexel Oil Sheets (2101948) to lubricate. ACCO Brands accepts no liability for

product performance or safety when other types or brands of lubricants are used on any part(s) of

this machine. GBC recommend using an oil sheet after the bin has been emptied three times (and

for ongoing three bin cycle thereafter). Insert the oil sheet into the manual feed slot and NOT in the

auto-feed chamber. Using an oil sheet in the auto-feed chamber will contaminate the feed rollers

preventing the auto-feed mechanism shredding. Follow the maintenance instructions if the rollers

become contaminated.

7. maintenance

The rollers on the auto-feed mechanism may become dirty over time, please wipe clean with a

dry cloth to maintain maximum product performance.

The auto-start infra-red sensor, located in the paper feed entry-slot, can occasionally become

covered in paper-dust causing the shredder to run despite no paper being fed into the machine.

Switch the shredder off at the rear of the machine and carefully clean the sensor using a cotton-

swab.

service

We recommend these machines are serviced every 6 to 12 months by a GBC service engineer –

see back of this booklet for the contact details of our service centre and for enquiries about

maintenance contracts.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Trituradora de papel de GBC

GBC

GBC SHREDMASTER 1246S-2 Manual de usuario

GBC

GBC Auto+ 100M Manual de usuario

GBC

GBC 3870M-2 Manual de usuario

GBC

GBC 6550X-2 Manual de usuario

GBC

GBC SHREDMASTER SM15-08 Manual de usuario

GBC

GBC Silencio V35WS Manual de usuario

GBC

GBC Shredmaster 5570X Manual

GBC

GBC Shredmaster CC195 Manual de usuario

GBC

GBC CX40-59 Manual de usuario

GBC

GBC Shredder Manual de usuario

GBC

GBC ShredMaster GDS2213 Manual de usuario

GBC

GBC AutoFeed+ 60X Manual de usuario

GBC

GBC CM15-30 Manual de usuario

GBC

GBC SHREDMASTER PSX12-06 Manual de instrucciones

GBC

GBC ShredMaster GKHS9 Manual de usuario

GBC

GBC SHREDMASTER PX12-06 Manual de usuario

GBC

GBC Shredmaster 5020S Manual de usuario

GBC

GBC SHREDMASTER PX08-04 Manual de instrucciones

GBC

GBC MOMENTUM Manual de usuario

GBC

GBC Mercury RDS2270 Manual de usuario

GBC

GBC Shredmaster 1236S Manual de usuario

GBC

GBC Auto+ 100M Manual de usuario

GBC

GBC ShredMaster GLS3230 Manual de usuario

GBC

GBC Shredmaster 3220S Manual

Manuales populares de Trituradora de papel de otras marcas

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Manual de instrucciones

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manual de usuario

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manual de usuario

Rexel

Rexel Optimum AutoFeed+ 45X Manual de usuario

Martin Yale

Martin Yale 227284S1 Manual de usuario

Bonsaii

Bonsaii DocShred C223-A Manual de usuario

HSM

HSM Pure 740 max Manual de usuario

TRU RED

TRU RED TR-BMC20A Manual de usuario

Fellowes

Fellowes 50S Manual de usuario

Gude

Gude GH 2600 P Manual de usuario

Ativa

Ativa DQ80M Manual de usuario

Q-Connect

Q-Connect Q8CC Manual de usuario

Fellowes

Fellowes POWERSHRED C-325CI Manual de usuario

Olivetti

Olivetti Privacy 5000C Guía de inicio rápido

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Manual de usuario

Dahle

Dahle paperSAFE 22022 Manual de usuario

Formax

Formax OnSite FD 87 Manual de usuario

GEHA

GEHA Home & Office S7 CD Manual de usuario