Gator PT350 Manual de usuario

PT350 Multi-functional Tracker

User Manual

Edition 1.0

LA Brand

http://www.gatorcn.com

China Printing

WEB: http://www.gatorcn.com

EMAIL: [email protected]

Tel: +86-755-23085553

Mob: +86-18620381992

Contents

Chapter I Preface .......................................................................................................................................2

I. General......................................................................................................................................................2

II. Notices .....................................................................................................................................................2

Chapter IIAbout the Device............................................................................................................................... 2

I. Components.............................................................................................................................................. 2

II. Product Features ....................................................................................................................................2

III. Product Specifications..........................................................................................................................3

1. Technical Specifications ..................................................................................................................3

2. Others............................................................................................................................................... 3

Chapter III Use Preparation............................................................................................................................... 3

I.Accessories................................................................................................................................................3

II. Charge the Battery................................................................................................................................. 4

III. Installation of SIM Card......................................................................................................................4

Chapter IV Commands Corresponding to and Operation Method of Basic Functions................................ 5

1. Location Inquiry.............................................................................................................................. 5

(1) SMS Inquiry...................................................................................................................................5

2. Setup of Center Number.................................................................................................................6

3. Bi-directional Call Function ...........................................................................................................6

5. Monitoring Function.......................................................................................................................6

6. Regular Upload Interval Setup.......................................................................................................7

7. Function of Changing Password..................................................................................................... 7

8. Low-VoltageAlarming Function.................................................................................................... 7

9. SetAPN Command..........................................................................................................................7

10. Set server address(ip,port)............................................................................................................8

11. Set user name .................................................................................................................................8

12. Electronic Fence Function ............................................................................................................ 8

(1)GPS Fence Function .......................................................................................................................8

(2)GSM Fence Function...................................................................................................................... 9

(3) Fence Reading Function................................................................................................................9

(4) Function of Canceling Fence.........................................................................................................9

13. Commands list:..............................................................................................................................9

Notices:............................................................................................................................................................... 13

Chapter I Preface

I. General

PT350 represents the perfect combination of GSM and GPS technologies. This model, with precise

dimensions and compact appearance, expresses the advanced workmanship in the GSM and GPS field and is

the typical design combing communication products and GPS services.

As a professional security and positioning company, we will provide you with more and better

products and services. Before use, please spend several minutes reading this user‟s manual in order to

understand operation details and obtain better services.

II. Notices

1. Please read carefully this user‟s manual and always use correct operation methods to prevent any

possible errors.

2. This user‟s manual is for reference only. If some contents and operation steps are inconsistent with

those for the actual product, the latter will prevail.

3. The defaulted password of this product is 0000.

Chapter II About the Device

PT350, as a personal remote positioning device made up of GPS module and GSM/GPRS module, is

compact in dimensions and has high accuracy. On the basis of GPS satellites and under dynamic conditions, it

can provide you with accurate and correct location information. With such features, it can be used to protect

and look for our old people and children. You can use it for safety purpose and other purposes, such as remote

positioning to protect property safety and follow animals.

I. Components

1. Inbuilt GPS Module

2. Internet positioning service center, used to receive and send positioning information.

II. Product Features

●GPS individual or fleet positioning;

●GSM /GPRS modem supports two frequency bands, i.e. 900/1800（850/1900）MHz(options)

●High-sensitivity, new workmanship and the most advanced GPS chip;

●Can accurately position even if with weak signals;

●Can work effectively in limited space such as the remote and narrow places in a city;

●Low energy consumption;

●Fast signal capturing;

●Supports single positioning and continuous tracking;

●Supports alarming and remote monitoring;

●Supports fast dial button;

●Supports the location information inquiry by SMS and Internet

●May monitor without disturbing the tracked person and realizes real-time tracking;

●Can position the holder by call or mobile phone SMS;

●In emergency, press the SOS button to have an accurate positioning.

III. Product Specifications

1. Technical Specifications

GSM module

GSM850/1900Hz or GSM900/1800MHz, two combinations

GPS chip

Latest

GPS sensitivity

-159dBm

GPS center frequency

L1, 1575.42MHz

GPS positioning accuracy

5-25m

GSM positioning accuracy

100-500m

Speed accuracy

0.1 m/s

Time accuracy

Synchronous with GPS

Default data

WGS-84

Hot start

Warm start

38s

Max. altitude

18000m

Max. speed

515m/s

Gravitational acceleration

﹤4g

2. Others

Working temperature

-20---65℃

Humidity

5%---95%

Dimensions

80×49×16 mm

Voltage

Rechargeable 800mAh battery

Power supply

DC5V

Standby time

>48h

Buttons

One SOS emergency button for emergency aid; Call 1, Call 2,

Receive and Hang up buttons.

Chapter III Use Preparation

I. Accessories

1. Main unit

2. USB data cable

3. Charge r

4. Headset cable (optional)

CALL2 button Lanyard hole

Receive button Speaker sound hole

SOS button MIC

Call 1 button USB

End button Power button

Power-on indicator

II. Charge the Battery

Before the use of the tracker, please charge the battery at least 4h via the USB charging cable. For the first

charge, in order to bring the performance of the battery into full play, charge it above 12h.

Indicator of charging:

Red, being charged;

Green, charging completed.

III. Installation of SIM Card

Open the back cover, then you will see the place where the SIM card is placed. Then push the SIM card into

the slot until it comes into its proper position completely and make sure it is locked. See the following figures:

Remove this small iron piece Insert the SIM card in as directed Restore the small iron piece

Choose SIM card:

The type of the SIM card is GSM card (the SIM card of China Mobile is recommended).

Make sure the SIM card has sufficient amount in order to pay the communication cost.

Prepare one piece of SIM card for mobile phone (the SIM card of China Mobile is recommended),

make sure that the card has opened such functions of Caller ID and receiving and sending messages. If

necessary, use the service platform to track the GPRS function to be opened in real time.

Chapter IV Commands Corresponding to and Operation Method of Basic Functions

1. Location Inquiry

(1) SMS Inquiry

Create 666 + password command (defaulted password as 0000) via mobile phone and send it to the student

terminal mobile phone number; after successful sending, the guardian‟s mobile phone will receive a piece of

word message. See the flow as follows:

Send command to the terminal The terminal will return confirmation message to the mobile phone

By the same means, send the command 987 + password to the terminal, then the terminal will return one

piece of website message. The guardian may inquire the location information of the ward attached with local

map through this website message.

2. Setup of Center Number

Set the center number by means of SMS through mobile phone. After the setup is successful, then the

mobile phone sending the SMS will receive the “config OK”response message from the terminal.

Command format: #710# center number # user password ##

For example: #710#134xxxxxxxx#0000##

Note: All alarming information thereafter including SOS, low power, electronic fence, etc will be returned

to such number.

3. Bi-directional Call Function

Send the command in form of SMS through mobile phone to the terminal. After the setup is successful,

after sending the SMS, the mobile phone will receive the config OK response message returned from the

terminal.

Setup format: #711# Call 1# Call 2 # Call 3 # 0000##

For example:

Send command to the terminal The terminal will return confirmation message to the mobile phone

Note: After the setup is successful, press the CALL 1 button, then the terminal will automatically dia the

first phone number. Press the CALL 2 button, then the terminal will automatically dial the second phone

number. In addition, the terminal may receive all calls by pressing the Receive button and end all calls by

pressing the End button.

Remarks: The automatic receiving function of the terminal. For all calls, if the terminal does not choose to

end or receive within 30s, they can be received automatically.

4. SOS Function

If a ward，3number (the number in 3 above) is set, when the ward encounters emergency and presses the

SOS button, then the terminal will send alarming information to the center number and dial three ward numbers

in order.

5. Monitoring Function

The ward may send SMS 555 + password to the terminal of the ward; in such case, the ward terminal of

the ward will automatically call back the mobile phone of the guardian and the guardian may listen to the sound

of the surroundings within 10m around the ward.

SMS format: 5550000

Remarks: 0000 is the initial default password and the actual use s subject to the actual password.

6. Regular Upload Interval Setup

The defaulted factory upload interval of this device is 2 minutes for getting the point and 10 minutes for

uploading one piece of positioning information. The user may change such parameter according to actual

demand.

Command format: # command number 730# Sampling interval # Pieces of uploads # User password ##

For example: #730#20#4#0000##

Note: The parameter “20” indicates getting one point every 20s; after getting points accumulatively for 4

times, upload one piece of positioning information with the upload interval as 20*4=80s. The user may change

this parameter as the case may be.

7. Function of Changing Password

Send the SMS “#770# User new password # User old password ##” by mobile phone to the terminal

number, after successful sending, the mobile phone with such setup will receive one piece of config ok

response information, as shown in the following figure:

Send command to the terminal The terminal will return confirmation message to the mobile phone

8. Low-VoltageAlarming Function

If the terminal of the ward has a very low power and needs to be powered off, the terminal of the ward will

automatically upload one piece of low-voltage alarming command to the monitoring center number.

9. SetAPN Command

Create the SMS “802#APN letters or digits, 4-20 bits # Log user name letters or digits 4-20 bits in #

Log password letter or digits 4-20 bits in # terminal password 4 bits ##” and send it to the terminal; after

executing this command, the terminal will automatically restart and connect to GPRS with APN set.

Command example 1: #802#cmnet###0000##

Command example 2: #802#CCDLEN#QIUXIA.21#RX0000#0000##

After this command is executed, APN will be CCDLEN; the login user name is QIUXIA.21 and login

password is RX0000.

Note: The defaultAPN of this product is CMNET.

10. Set server address(ip,port)

Command Format: #803# Fixed IP address# port number#4-digit password##

This command is used to set GPRS center server address, which could be fixed IP number, like IP1, IP2,

IP3, IP4……as well as domain name with the length less than 64. After the setup is successful, the module

will send a reply with „&803&successful setting&&‟ or „&803&PASSWORD ER&&‟ if the password is

wrong.

Example: #803#58.60.185.172#9125#0000##

Setup via domain name:

Example: #803#gps.gatorcn.com#9125#0000##

11. Set user name

SMS Command Format: #801#4~20-digit letters or numbers #4-digit password ##

Example: #801#13900139000#0000##

Notes: After executing this command, the user name of the terminal on GPRS mode is required to be set up

according to actual demand. After the setup is successful, the terminal will send reply with

„&801&successful setting&&‟ or „&801&PASSWORD ER&&‟ if the password is wrong.

12. Electronic Fence Function

(1)GPS Fence Function

The guardian may log into the system, click the custom deviation setup in the user system manager, enter

the deviation setup interface, choose the longitude and latitude of the center point to be set as fence. Click the

mouse in the Google map, then reading page will display the electronic fence with longitude and latitude set.

See the figure below:

Set fence format: # command number (751) # fence radius # sampling interval # longitude # latitude #

user password ##.

For example: #751#500#5#22.5442N#113.91E#0000##

After the setup is successful, the setting mobile phone will receive a piece of config ok command. Then,

when the ward leaves this area, the terminal will send the alarming information of being out of the fence to the

center number.

(2)GSM Fence Function

The ward may send # command number (740) user password 4 digits ## command to set the GSM

fence. After the setup is successful, the terminal will return the message of CONFIG OK to the setting

mobile phone, or the message of PASSWORD ER if the password is wrong.

For example: #740#0000##

Description of GSM fence: The terminal reads the GSM base station information, including that the main

base station and the adjacent base stations. Take the first four digits and keep them in the module. If the

base station has many data with different first digits, they all must be saved. And initiate the protection

status. In the state of protection, the module will read the data of all base stations (1-7) once every 5

minutes, and take the first 4 digits to compare with the protection data. If all the first 4 digits of the data of

all base station are consistent with the existing data, then dial or send alarming messages to the user

according to the alarming setup.

For example: #740#0000##. After the fence is set, the terminal will alarm in the case where it is moved

about 3-5km out of the fence.

(3) Fence Reading Function

Send commands to the terminal: # command number (752) # user password 4 digits ##; after the

command is set successfully, the terminal will read the data of the module fence working status and return

message to the sending mobile phone, or PASSWORD ER if the password is wrong.

For example: #752#0000##

Return: #open:1#lat:11456.209400#lng:2233.470100#distance:500#time:5#status:2

Where, open: 1 indicates fence open; Open: 0 indicates fence closed;

lat:11456.209400, latitude;

lng: 2233.470100; longitude;

distance: 500; fence radius;

time: 5 sampling interval;

status: 2 , terminal has obtained valid satellite data, fence works normally;

status: 1; fence open, but there are no valid satellite data have been received;

status: 0, no electronic fence is set.

(4) Function of Canceling Fence

Command name: # command number (760) # user password 4-digits ##

Example: #760#0000##

After the terminal receiving this command, all fence settings will be cancelled.

Advice；Do not set GSM fence and GPS fence at the same time.

13. Commands list:

Function

Command

Note

Mode Change

#70x#password##

Eg: #703#0000##

Default password is 0000,

This unit can support four

different mode and can

change mode each other.

#700#0000##

When X=0, the mode is

P2P mode,the feedback will

Tabla de contenidos

Otros manuales de GPS de Gator

Gator

Gator iDriveZ Navi 430 Manual de usuario

Gator

Gator GTRACK4G Manual operacional

Gator

Gator M518 Manual de usuario

Gator

Gator M508 Manual de usuario

Gator

Gator GTRAKPRO Guía del usuario

Gator

Gator M508 Manual de usuario

Gator

Gator M588T Manual de usuario

Gator

Gator GTRACK3G Manual de usuario

Gator

Gator GTRACK 4G Manual operacional

Gator

Gator GTKPRO2 Manual de usuario

Manuales populares de GPS de otras marcas

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Manual de usuario

Garmin

Garmin SOUNDER 125 Manual de usuario

Garmin

Garmin DEZL 580 Manual de usuario

Jigabot

Jigabot EX Manual de usuario

Pointer

Pointer Cellocator CelloTrack XT LTE Guía de instalación

Queclink

Queclink GV55LITE Manual de usuario

Voxson

Voxson Voxtrack GPS500 Manual de instrucciones

Garmin

Garmin ECHOMAP PLUS Manual de usuario

Starcom Systems

Starcom Systems Kylos Compact Manual de usuario

Garmin

Garmin 15 H Series Manual de usuario

Cobra

Cobra Marine MC 600Ci Manual de usuario

Cellocator

Cellocator CelloTrack T Manual de usuario

Enfora

Enfora Mini-MT GSM2228UG001 Manual de usuario

Magellan

Magellan eXplorist 100 Manual de usuario

LTE

LTE G50B Manual de usuario

Garmin

Garmin DEZL OTR500 Manual de usuario

SkyGolf

SkyGolf SkyCaddie SG1 Manual de usuario