Gator GRV90MKT Manual de usuario
GRV90MKT
OWNER’S MANUAL
9” Super wide mirror monitor
with Re
v
erse &
Li
v
e stream Camera
This manual is considered correct at time of printing but is subject to
change. For latest manuals and updates refer to the website.
www.gatordriverassist.com
2
Introduction
Product features
Thank you for purchasing the Gator GRV90MKT Mirror Monitor.
This product is a convenient and durable traveling video and data
recorder. Please ensure that you have read the product manual
and instructions in full, prior to installation and use. Failure to do
so may result in product failure/damage or incorrect operation
and therefore impact the product performance.
ATTENTION: The Mirror Monitor must be connected to power
when in use. The internal battery only holds date and time settings.
• 9.35" High-resolution LCD touch screen mirror monitor
• Rear camera input
• FHD video recording 1920*1080 @ 30 FPS
• 120 Degree wide angle lens surface mount butterfly camera
• Reverse camera functionality
• Live streaming functionality
• Parking guide lines
• G-Sensor, Loop recording
• 400mAh 3.7V Rechargeable battery
• Seamless cycle loop recording
• Rubber clip-on mount
• Supports Micro SD card class10 up to 64GB
• 12/24V DC car adapter (3.5M length)
• USB2.0 DC5V 2A
• Camera cable (6M length)
• Dimensions 72(H) x 18(W) x 260mm(L)
3
Introduction..................................................................2
Product features...................................................................2
Table of contents..................................................................3
Package components...........................................................4
Product structure..................................................................5
Installation of Mirror Monitor.................................................6
Hard wiring kit.......................................................................7
Touch screen functions......................................................8
Settings..................................................................9
Video playback mode........................................................10
Connecting to a computer..................................................10
G-sensor sensitivity............................................................10
Reversing guide lines........................................................11
Formatting SD card...........................................................11
Infringement of copyright warning......................................11
Product specifications.......................................................12
Troubleshooting guide.......................................................13
Safety information & warnings...........................................14
Technical assistance..........................................................15
Table of contents
4
Package components
Camera extension cable
with trigger wire
Mounting screws & 3M adhesive
for butterfly camerea
Mirror protector pads &
rubber mounting clips
USB cable
GRV90MKT
Mirror Monitor
Rear Camera
12/24V charging adapter
4
5
1) LCD touch screen
2) Power button
3) Micro SD card slot
4) Rear camera input
5) Power input (Mini USB)
6) Mounting clip-on system
2
1
3 5
6
Product structure
6
Installation of the Mirror Monitor
1. Clip on mirror design securely mounts on the existing rear
view mirror in the vehicle by stretching the bands at the back.
There are two positions based on thickness of existing mirror.
2. Insert Micro SD card into the Mirror Monitor
3. Insert power cable into the DC-in of the Mirror Monitor.
Connect the DC charging end of the power cable into the 12-24V
power socket of your vehicle. Hide cable as picture below.
4. Connect the rear camera to the input on the mirror. Test the
camera is working correctly and orientation before running the
cable and securing the camera mount on your vehicle.
5. Attach the red trigger wire to the reverse light of you vehicle to
engage parking guide lines when vehicle is put into reverse gear.
6. Turn vehicles ignition on, and the Mirror Monitor and it will
automatically start recording.
7. When recording the recording indicator LED will flash red.
8. For the Mirror Monitor to work it must receive power from the
charging adapter. Once power is removed or turned off the Mirror
Monitor will save the current file and turn off.
Suggested
7
Hard wiring kit GUNIHWC (Sold separately)
This can be purchased from your retailer to hard wire your Mirror
Monitor to your vehicle. A 3 Metre extension cable is also
available separately.
NOTE: The GUNIHWC Hardwire Kit is a simple plug and
play solution to hardwire any Mirror Monitor or device
using Mini or Micro USB for power. The Hardwire Kit is
compatible with 12V/24V DC for car or truck installations.
Please ensure that you have read the product manual and
instructions in full, prior to installation and use. Failure to
do so may result in product failure/damage or incorrect
operation and therefore impact the product performance.
8
Product structure
1 82
3 5
4 6
7
Touch screen functions
Long press the power button to turn the Mirror Monitor ON/OFF.
Short press the power button whilst recording to turn the display
off, recording will continue. The recording indicator will start
flashing RED when recording has started. To stop and start
recording, simply press the stop/start recording icon on the touch
screen. When recording press the lock icon to lock the recorded
video. Recording indicator LED will flash YELLOW. To rotate the
image press the Image rotation button. Note the camera does not
have GYRO so the recorded footage will not rotate, thus footage
will be upside down. Press the Microphone icon to turn audio on
or off. To enter settings or playback video files you must stop the
recording. In liveview & reversing mode touch the screen and
scroll Up/Down to change viewing area display. Note this does
not effect recording, for visual display purposes only. Touch the
screen and scroll Left/Right to change brightness.
1) Recording indicator
2) Settings
3) Playback
4) Stop/Start recording
5) Image rotation
6) Microphone ON/OFF
7) Lock/Unlock recorded files
8) Date/Time
9
Settings
Function
Movie Mode
Movie Clip Time
Sound Record
Mirror
Clock Settings
Stamp
Language
Flicker
LCD Power Save
PQ Mode
G-sensor
Volume
Reset Setup
Format SD-Card
FW Version
Description
1080P/720P
1/2/3 Min
On/Off
On/Off
Date/Time
Date+Logo/Date/Logo/Off
English/Russian/Chinese
50/60 Hz
Off/1/3 Min (Screen display time)
Soft/Standard/Bright
Off/High/Medium/Low
On/Off
Yes/No (All settings will be deleted)
Yes/No (All data will be deleted)
Firmware version
Press settings icon to enter video settings. Select function and select
settings to make changes. Press arrow icon to exit the function.
10
Video playback mode
When not recording press the playback icon to select recorded
and locked recorded video footage. Press on the file to view on
screen.You can press icons on screen to lock/ unlock/ back/
forward/ pause and delete recorded video files. Press return
arrow to exit to menu files. Press return arrow to exit playback.
G-sensor sensitivity
Connecting to a computer
You can remove the SD card from the Mirror Monitor and plug
the card directly into your computer to access files. With the SD
card inserted, and when connected to a computer. Two folders
will appear in the storage device. Normal and Event for locked
files.
This function activates in the case of a car accident by
determining the gravitational acceleration (1g = 9.8
meters/second^2). When this function activates the Dash Cam
will automatically save a 1 minute video file and save it to the
Event folder on the SD card. We recommend Low Sensitivity to
avoid false triggers.
Note: With this function turned on it may fill up the SD card with
locked video files. Re-format the SD card to create space. The
device does NOT guarantee video recording of all accidents as
built-in impact sensor may not be activated due to combination of
user settings and the level of impact during the collision.
Tabla de contenidos
Otros manuales de Cámara de salpicadero de Gator
Gator
Gator GHDVR291 Manual de usuario
Gator
Gator GHDVR380 Manual de usuario
Gator
Gator GRV43SKT Manual de usuario
Gator
Gator GHDVR370 Manual de usuario
Gator
Gator HDDVR250 Manual de usuario
Gator
Gator GHDVR80W Manual de usuario
Gator
Gator GDVR189 Manual de usuario
Gator
Gator GDVR190 Manual de usuario
Gator
Gator GHDVR350 Manual de usuario
Gator
Gator GHDVR72W Manual operacional
Gator
Gator C05EV00009 Manual operacional
Gator
Gator HDVR400L Manual de usuario
Gator
Gator HDDVR302 Manual de usuario
Gator
Gator G2KSR1 Manual de usuario
Gator
Gator HDDVR253 Manual de usuario
Gator
Gator HDDVR308 Manual de usuario
Gator
Gator GHDVR82W Manual operacional
Gator
Gator HDDVR550 Manual de usuario
Gator
Gator HDVR303 Manual de usuario
Gator
Gator GHDVR210 Manual operacional
