GarrettCom Magnum 8000X Manual de usuario

www GarrettCom com

Corporate Headquarters

GarrettCom, Inc.

213 Hammond Ave.

Fremont, CA 94539

Phone (510) 438-9071

Fax (510) 438-9072

Website: http://www.GarrettCom.com

email support@garrettcom.com

Magnum 8000X

Mixed-Media Fiber Hubs

Installation and User Guide

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/02)

www GarrettCom com

Magnum8000X

Mixed-Media Fiber Hubs

Installation and User Guide

Part #: 84-000122 (Rev C 04/02)

Trademarks

Ethernet is a trademark of Xerox Corporation

NEBS is a trademark of Telcordia Technologies

UL is a registered trademark of Underwriters Laboratories

GarrettCom, Magnum and Personal Switch are trademarks and Personal Hub is a

registered trademark of GarrettCom, Inc.

Important: The Magnum 8000X Mixed-Media Fiber Hub contains no user

serviceable parts. Attempted service by unauthorized personnel shall render

all warranties null and void. If problems are experienced with Magnum

8000X Mixed-Media Fiber Hub products, consult Section 6,

Troubleshooting, of this User Guide.

of this publication may be reproduced without prior written permission from

GarrettCom, Inc.

Printed in the United States of America.

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/02)

www GarrettCom com

Contacting GarrettCom, Inc

Please use the mailing address, phone and fax numbers and email address listed

below:

GarrettCom, Inc.

47823 Westinghouse Drive

Fremont, CA 94539

Phone (510) 438-9071

Fax (510) 438-9072

Website: http://www.GarrettCom.com

email [email protected]

Federal Communications Commission

Radio Frequency Interference Statement

This equipment generates, uses and can radiate frequency energy and if not

installed and used properly, that is in strict accordance with the manufacturer's

instructions, may cause interference to radio communication. It has been tested and

found to comply with the limits for a Class A computing device in accordance with the

specifications in Subpart J of Part 15 of FCC rules, which are designed to provide

reasonable protection against such interference when operated in a commercial

environment. Operation of this equipment in a residential area is likely to cause

interference, in which case the user at his own expense will be required to take

whatever measures may be required to correct the interference.

Magnum DS80 Dual-Speed Personal Hub Installation and User Guide (05/ 02)

www GarrettCom com

The Magnum Line

ETHERNET CONNECTIVITY PRODUCTS

"DESIGNED AND MANUFACTURED IN THE USA"

OVERVIEW

GarrettCom, Inc.offers the premium-quality Magnumline of Ethernet LAN

connectivity products with industry-standard functionality and built-in fiber

configurability. Magnum products are designed for use in demanding Carrier Class,

Industrial Grade and OEM applications where reliability is a primary consideration.

6K25 Managed Fiber Switches, Gigabit, 100 and 10 Mbps, fiber and copper ports,

mix-and match. Features SFF fiber for up to 25 fiber ports in a 1U unit.

4K-Series Switches, 100 and 10 Mbps, copper ports with optional fiber port, with

auto-negotiating full switching performance.

Quad-Series Fiber Switches, 100 & 10Mbps, fiber and copper ports, mixed-speed

and mixed-media types, full switching performance.

“Outdoor” Ethernet Switch, for temperature uncontrolled locations

6 10/100 and 2 100Mb fiber ports, can be connected in strings

Mixed-Media Fiber Hub, 16-port Stackable,10/100 auto-sensing

Dual Speed 8-port and 16-port Stackables, 10/100 auto-sensing

Stackable Hubs, SNMP Optional

10Mb series and 100Mb series, both w/ optional port modules

Personal Switches, 10/100Mb

8 port dual speed, Auto-negotiable with fiber option

Personal Hubs, 100Mb or 10/100Mb

8-port, with two switched ports (1 fiber built in)

Personal Hubs, 10Mb series

8-port + AUI, stackable to 5 high, + optional BNC of fiber port

8 or 9-port and 4 or 5-Port Personal Hubs, w/ man. up-link sw.

Media Converters, 10Mb and 100Mb series

All media combinations, incl. fiber ST, SC, mm., single mode

The “X-line” of configurable MiXed Media products:

Stackable Concentrators, SNMP optional, 13-Ports

Mini-Concentrators, 7 Ports, Repeaters, 2-Ports

Repeater Port Modules (RPMs),6 types for Ethernet media

Bridge Port Modules (BPMs), 4 types, for segment isolation

Transceivers, 10Mb series Mini-Transceivers and Coax Models Apr, 02

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

TABLE OF CONTENTS............................................................................................. PAGE

1.0 TECHNICAL SPECIFICATIONS ............................................................................... 1

1.1 Specifications - Port Modules (PMs) for front ports.................................... 3

1.2 Specifications - Switch Port Module (SPM) for bonus port.......................... 3

1.3 Ordering Information...................................................................................... 4

2.0 INTRODUCTION - MAGNUM 8000X MIXED-MEDIA FIBER HUB .......................... ……5

2.1 Inspecting the Package and Product................................................................ 5

2.2 General Information........................................................................................ 6

2.3 Product Description - Magnum 8000X Fiber Hub.......................................... 6

2.3.1 The Magnum 8000X Fiber Hub Chassis ............................................. 7

2.4 Port Modules (PMs)....................................................................................... 8

2.5 Switch Port Modules (SPMs)........................................................................ 9

2.5.1 Magnum SPM-FDST........................................................................ 12

2.5.2 Magnum SPM-FDSC........................................................................ 13

2.5.3 Magnum SPM-FDSSC...................................................................... 13

2.5.4 Magnum SPM-TTX .......................................................................... 14

2.5.5 Magnum SPM Specificatons Summary Table ................................. 14

2.6 10/100 Speed Auto-Sensing (front ports, copper only)................................. 15

2.7 Stacking Magnum Mixed-Media 8000X ...................................................... 15

2.8 Bridge module between 10/100Mbps domain .............................................. 16

2.9 Feature & Benefits........................................................................................ 18

2.10 Applications................................................................................................ 19

3.0 INSTALLATION - MAGNUM 8000X INSTALLATION..................................... ……21

3.1 Locating the Magnum 8000X ...................................................................... 21

3.2 Connecting Ethernet Media.......................................................................... 21

3.3 Connecting Fiber Optic ST-type “twist-lock”.............................................. 22

3.4 Connecting Fiber Optic SC-type “snap-in”.................................................. 22

3.5 Connecting Fiber Optic Single-Mode ........................................................ 23

3.6 Connecting Twisted-Pair, RJ-45 ................................................................ 23

3.6.1 100Mbps collision domain diameter, cable distances and PDV *..... 24

3.6.2 Connection to NICs, that support Auto-negotiation.......................... 27

3.7 Table-Top or Shelf Mounting ...................................................................... 27

3.8 Rack-Mounting ............................................................................................ 27

3.9 Port Module (PM) Installation* .................................................................. 28

3.9.1 Preparation for Installing and Removing PMs .................................. 28

3.9.2 Installing PM Cards in the Magnum 8000X*.................................... 30

3.9.3 Removing PM cards.......................................................................... 31

3.10 Preparation for Installing and Removing SPMs * ...................................... 32

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

3.10.1 Installing SPM module in Magnum 8000X * ................................. 34

3.10.2 Removing SPM module *............................................................... 35

3.11 Powering the Magnum 8000X .................................................................. 35

4.0 OPERATION - .................................................................................................... 37

4.1 Repeater Functionality......................................................................... 37

4.2 Dual Speed Functionality .................................................................... 37

4.3 Auto-negotiation and speed sensing .................................................... 39

4.4 Chasis LEDs ...................................................................................... 39

4.5 Power Budget Calculations for Fiber Media *.……………… ....... .40

5.0 INTRODUCTION - MAGNUM PORT MODULES (AS SEPARATE ITEMS IN A SHIPMENT). 41

5.1 Inspecting the Package and Product ............................................................. 41

5.2 Product Description...................................................................................... 41

5.2.1 FPM-MST (FX), FPM10-MST (FL), Fiber ST “twist-lock” connec. 42

5.2.1a FPM10-MST ,10Mbps multimode, FC- ST “twist-lock” connec.... 42

5.2.2 FPM-MSC (FX), FPM10-MSC (FL), Fiber SC “snap-in” connect . 42

5.2.2a FPM10-MSC 10Mbps multimode FC- SC “snap-in” connector..... 43

5.2.3 Single-Mode FPMs, 10 and 100Mbps ............................................... 43

5.2.3a FPM10-SSC, 10Mbps Singlemode FC- SC “snap-in” connector.... 43

5.2.3b FPM10-SST,10Mbps Singlemode FC-ST “snap-in” connector...... 44

5.2.4 FPM-MTRJ, FX small-form-factor “plug -in” connector ................. 44

5.2.5 FPM-MV45, FX small-form-factor “plug -in” connector................. 44

5.2.6 FPM-SXMST and -SXMSC (100BASE-SX short wavelength) ....... 45

5.2.7 PM-RJ45 & PM-RJ45U (Twisted Pair) .......................................... 46

5.2.8 PM-FP............................................................................................... 47

6.0 TROUBLESHOOTING .................................................................................. 48

6.1 Before Calling for Assistance....................................................................... 48

6.2 When Calling for Assistance ........................................................................ 49

6.3 Return Material Authorization (RMA) Procedure........................................ 49

6.4 Shipping and Packaging Information ......................................................... 50

APPENDIX A: WARRANTY INFORMATION ………........................................... 50

APPENDIX B: OPTIONAL 48VDC POWER SUPPLY * ............................................……51

APPENDIX C : INTERNAL DC DUAL-SOURCE POWER OPTION ............................……53

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

Revisions

Rev D 05/02 : Updated the Rack Mounting and Appendix B & C with 24VDC &

125VDC Power Supply option

Rev C 05/01 : Change the company name to GarrettCom, Inc. (Formerly it was Garrett

Communications). There are no changes to the content of the material at this time

Rev B 01/01 : Added or changed 100Mbps collision domain diameter, cable

distances and PDV; Port Module (PM) Installation; Installing PM Cards in the

Magnum 8000X; Preparation for Installing and Removing SPMs; Installing

SPM module in Magnum 8000X; Removing SPM module; Power Budget

Calculations for Fiber Media; Optional 48VDC power supply; Optional 48V Dual-

Source DC power; Optional Dual Power Supply, AC Power; Optional Dual Power

Supply, 48VDC Power.

Rev A 03/99 : This revision is the initial release of the Magnum 8000X Mixed-Media

Fiber Hub user manual.

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

1.0 Technical Specifications

Performance (hub supports both 10 and 100Mb domains, ports individually selected)

When a port is operating at 100Mbps

Data Rate: 100Mbps

PDV (Path Delay Value): 80BT, exceeds Class II

When a port is operating at 10 Mbps :

Data Rate: 10 Mbps

Partitioning: Enforced after 63 consecutive collisions

Auto-reconnect: Occurs after one packet of error-free reception

Network Standards

100Mbps : Ethernet IEEE 802.3u , 100BASE-TX, 100BASE-FX, 100BASE-SX

10 Mbps : Ethernet IEEE 802.3, 10BASE-T, 10BASE-FL

RJ-45 ports are auto-sensing for speed: IEEE 802.3u

Packet-Processing Between Domains (internal 10/100 switch or bridge)

Filtering and Forwarding Rate from 100Mbps ports : 148,800 pps max

Filtering and Forwarding Rate from 10 Mbps ports : 14,880 pps max.

Processing type : Store and Forward

Auto-learning : 8K address table, shared for both traffic domains

Packet buffers : 2MB,dynamically allocated & shared on both domains

Latency (not including packet time) : 100 to 10 Mbps : 5µs

10 to 100Mbps : 5µs

CPU Type : State Machine

Maximum Ethernet Segment (or Domain) Lengths

10BASE-T (CAT 3, 4, 5 UTP) - 100 m (328 ft)

100BASE-TX (CAT 5 UTP) - 100 m (328 ft)

Shielded twisted pair - 150 m (492 ft)

10BASE-FL multi-mode fiber optic - 2 km (6,562 ft)

10BASE-FL single-mode fiber optic - 10 km (32,810 ft)

100BASE-FX, half-duplex:(multi-mode) - 412 m (1350 ft)

100BASE-SX, short wavelength hdx (m.m.) - 300 m ( 935 ft)

100BASE-FX, full duplex:(multi-mode) - 2.0 km (6,562 ft)

100BASE-FX, half-duplex:(single-mode) - 412 m (1350 ft)

100BASE-FX, full duplex:(single-mode) - 15.0 km (49,215 ft)

Operating Environment

Ambient Temperature: 32ºF to 122ºF (0ºC to 70ºC)

Storage Temperature: -20ºC to 70ºC

Ambient Relative Humidity: 5% to 95% (non-condensing)

Power Supply, AC (Internal)

AC Power connector : IEC-type, male recessed, rear of chassis

Power Input Voltage : 90 to 260 VAC (auto ranging)

Power Input Frequency : 47-63 Hz

Power Consumption : 25 watts typical, 30 watts max. P.S. rating

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

DC Power Supply (Options)

-48VDC Power Input Voltage : 36 to 70 VDC

24VDC Power Input Voltage : 20 to 36VDC

125VDC Power Input Voltage : 120 to 160VDC

Std. Terminal Block : “ -, GND, + ”

Power Consumption: same as for AC models, see above

For Dual Source and Redundant DC for –48VDC, 24VDC Power & 125VDC

supply options (Optional), see Appendices

For optional 23” Telco rack-mount brackets, order Model # RMB-23W

Network Cable Types (Modular on a per-port basis)

Fiber ports at 100Mbps and/or at 10 Mbps:

Multi-mode (62.5/125 typical) and single-mode (9/125 typical)

100Mbps copper (RJ-45): Category 5 UTP/STP

10 Mbps copper: Cat 3, 4, 5 UTP (Note: auto-neg. doesn’t sense cable type)

Stacking Cable - stacking may be up to three units (48 ports) of mixed-media

8000X hubs and/or DS8016-A Dual-Speed hubs.

A stacking cable with 25 pin DB25 male connectors, shielded, 9 inches (23

cm) long, is included with each Magnum 8000X-A add-on unit.

Manual Switches

Up-link Switch: RJ-45U Port Module only (for crossover and cascading)

Auto/100 Switch: RJ-45 and RJ-45U port Module (for auto-negotiation or

fixed 100Mbps speed operation)

Packaging

Enclosure: High strength metal. 1U rack-mounting brackets included.

Suitable for wiring closet shelf, 19” rack or desktop mounting.

Dimensions: 1.75 in H x 17 in W x 9 in D ( 4.4cm x 43.2cm x 22.9cm)

Weight: 4.0 lb. ( 1.8 Kg)

Cooling method: Fan cooled, internal @ 9 cfm

LED Indicators

PWR : Steady On when power applied

BR : Steady On, unit has bridge module inside

COL 10 and 100 : Collision LEDs, one for each speed domain

ACT 10 and 100 : Activity LEDs, one for each speed domain

Agency Approvals

Safety :UL Listed (UL 1950), cUL, CE

Emissions: meets FCC Part 15, Class A

Warranty

Three years, return to factory Made in USA

Magnum 8000X Mixed-Media Fiber Hubs Installation and User Guide (05/ 02)

www GarrettCom com

1.1 Specifications - Port Modules, for front ports of the Magnum 8000X

(For Power Budget data, see Section 4.5)

PM Model # IEEE Standard Speed Connector type -Mode

FPM-MST FX 100Mbps ST “twist-lock” multi-

FPM-MSC FX 100Mbps SC “snap-in” multi-

FPM-SSC FX 100Mbps SC “snap-in” single-

FPM-MTRJ FX 100Mbps MT-RJ “plug-in” multi-

FPM-MV45 FX 100Mbps VF-45 “plug-in” multi-

FPM-SXMST SX 100Mbps ST “twist-lock” multi-

FPM-SXMSC SX 100Mbps SC “snap-in” multi-

FPM10-MST FL 10Mbps ST “twist-lock” multi-

FPM10-MSC FL 10Mbps SC “snap-in” multi-

FPM10-SST FL 10Mbps ST “twist-lock” single-

FPM10-SSC FL 10Mbps SC “snap-in” single-

FPM-MFC FL 10Mbps FC “screw-on” multi-

PM-RJ45 -T, TX 10/100 auto-neg. RJ-45 twisted pair

PM-RJ45U -T, TX 10/100 auto-neg. RJ-45 with up-link sw. TP

PM-BLNK Blank cover for an unused port slot

Two LED indicators per fiber port, in each PM, are “L” for LINK is made, “A” for traffic Activity.

Additional LED for RJ-45 ports are “S” for Speed, where flashing indicates auto-negotiation is

ready (or nothing is connected), steady ON indicates 100Mbps operation and OFF means 10 Mbps

operation has been selected by the last auto-negotiation session.

1.2 Specifications - Switching Port Modules (SPMs) for bonus port

* PDV (path delay value) of an SPM is the same as a user-node i.e. , 50 BT

SPM Type * SPM-TTX SPM-FDSC SPM-FDST SPM-FDSSC

Physical Signaling Type 100BASE-TX

& 10BASE-T

100BASE-FX

mm* f. duplex

100BASE-FX

mm* f. duplex

100BASE-FX

sgl.mode, fdx

Connector Type RJ-45 Fiber-SC Fiber-ST Fiber-SC

LINK LED yes yes yes yes

Receive (RX) LED yes yes yes yes

Up-link switch yes n.a. n.a n.a.

10/100Mb switch yes n.a. n.a. n.a.

(For power budget data, see Section 4.5)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de GarrettCom

GarrettCom

GarrettCom Magnum 6K32T Manual de usuario

GarrettCom

GarrettCom 4K-Series Manual de usuario

GarrettCom

GarrettCom Ethernet Networks and Web Management Manual de usuario

GarrettCom

GarrettCom P80C Manual de usuario

GarrettCom

GarrettCom Hardened Ethernet Switches P62F Manual de usuario

GarrettCom

GarrettCom Magnum ES42 Series Manual de usuario

GarrettCom

GarrettCom Magnum PS14P Manual de usuario

GarrettCom

GarrettCom DS8016 Manual de usuario

GarrettCom

GarrettCom 500-Series Manual de usuario

GarrettCom

GarrettCom DS80C Manual de usuario

GarrettCom

GarrettCom PS14H-48VDC Manual de usuario

GarrettCom

GarrettCom Magnum 10KG Manual de usuario

GarrettCom

GarrettCom DS60s Manual de usuario

GarrettCom

GarrettCom Magnum 6K8 Manual de usuario

GarrettCom

GarrettCom MAGNUM 6KM Manual de usuario

GarrettCom

GarrettCom Quad Manual de usuario

GarrettCom

GarrettCom Magnum 14E Manual de usuario

GarrettCom

GarrettCom Magnum 4K220 Manual de usuario

GarrettCom

GarrettCom Magnum CS14 Series Manual de usuario

GarrettCom

GarrettCom Magnum 4K16 Manual de usuario

GarrettCom

GarrettCom Magnum 6K8-Series Manual de usuario

GarrettCom

GarrettCom Magnum 6K25e Manual de usuario

GarrettCom

GarrettCom Magnum 4K24F Manual de usuario

GarrettCom

GarrettCom Magnum DS80 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario