Fujitsu ETERNUS JX40 S2 Manual de usuario

ETERNUS JX40 S2

Storage Subsystem

Operating Manual

Edition August 2015

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other

rights arising from the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior

written permission of Fujitsu.

ETERNUS JX40 S2 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual “Safety notes and other important information” and

ensure these safety notes are understood before using the product.

Keep this manual and the manual “Safety notes and other important

information” in a safe place for easy reference while using this product.

Radio interference

This product is a “Class A” ITE (Information Technology Equipment) as defined

by the Voluntary Control Council for Interference by Information Technology

Equipment (VCCI-A) of Japan. In a domestic environment this product may

cause radio interference, in which case the user may be required to take

appropriate measures.

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Operating Manual ETERNUS JX40 S2

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, “high safety use”). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by FUJITSU may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

ETERNUS JX40 S2 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Target Group . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.2 Structure of the Manual . . . . . . . . . . . . . . . . . . . . 10

1.3 Documentation Overview . . . . . . . . . . . . . . . . . . . 11

1.4 Notation Conventions . . . . . . . . . . . . . . . . . . . . . 12

1.5 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . 12

2 Important Notes . . . . . . . . . . . . . . . . . . . . . . . . 15

2.1 Notes on Safety . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.2 Electrostatic-sensitive Component Label . . . . . . . . . . 17

2.3 CE Certificate . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 18

2.5 Notes on Mounting the Rack . . . . . . . . . . . . . . . . . 19

2.6 Notes on Transportation . . . . . . . . . . . . . . . . . . . . 19

2.7 Environmental protection . . . . . . . . . . . . . . . . . . . 20

3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

3.1 Installation Steps . . . . . . . . . . . . . . . . . . . . . . . . 23

3.2 Unpacking the Storage Subsystem . . . . . . . . . . . . . . 24

3.3 Installing the ETERNUS JX40 S2 in the Rack . . . . . . . . . 25

3.3.1 Requirements of the Rack . . . . . . . . . . . . . . . . . . . . 25

3.3.2 Rack mounting . . . . . . . . . . . . . . . . . . . . . . . . . . 26

3.4 Switching the Storage Subsystem ON/OFF . . . . . . . . . 31

Operating Manual ETERNUS JX40 S2

Contents

4 Operating and Indicator Elements . . . . . . . . . . . . . . . 33

4.1 Front Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4.1.1 Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.1.2 Disk LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4.2 Rear Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4.2.1 I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.2.2 Power Supply Unit (PSU) . . . . . . . . . . . . . . . . . . . . . 39

5 Hard Disk Drives . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.1 Handling Hard Disk Drives . . . . . . . . . . . . . . . . . . . 41

5.2 Removing/Installing Hard Disk Drive/Drive Dummy . . . . . . 42

6 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

6.1 SAS Connection . . . . . . . . . . . . . . . . . . . . . . . . . 47

6.2 Power Supply Connection . . . . . . . . . . . . . . . . . . . 49

7 Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . 51

7.1 Basic RAID controller / HBA configuration . . . . . . . . . . 51

7.2 RAID controller / HBA configuration and maximal storage

configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

7.3 RAID controller / HBA configuration with two way storage . . 53

7.3.1 Host Bus Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 53

7.4 Redundant controller and storage two way configuration . . 54

7.5 Redundant controller and storage with file sharing . . . . . 55

8 Fault Clearing . . . . . . . . . . . . . . . . . . . . . . . . . . 57

8.1 Problem Solutions and Tips . . . . . . . . . . . . . . . . . . 58

8.1.1 Identification LED (Front) . . . . . . . . . . . . . . . . . . . . . 58

8.1.1.1 Identification status LED is on . . . . . . . . . . . . . . . . . 58

ETERNUS JX40 S2 Operating Manual

Contents

8.1.2 Fault LED (Front) . . . . . . . . . . . . . . . . . . . . . . . . 58

8.1.2.1 Fault LED is on during operation . . . . . . . . . . . . . . . 58

8.1.3 Power LED (Front) . . . . . . . . . . . . . . . . . . . . . . . . 58

8.1.3.1 Power LED remains dark . . . . . . . . . . . . . . . . . . . 58

8.1.4 I/O Module (IOM) . . . . . . . . . . . . . . . . . . . . . . . . 59

8.1.5 Temperature Sensor Error Message . . . . . . . . . . . . . . 59

8.1.6 Error LED of the Hard Disk Drive Indicates Disk Failure . . . . 59

8.1.7 The ETERNUS JX40 S2 does not Power on with the Attached

Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

9 Replacing Components . . . . . . . . . . . . . . . . . . . . 61

9.1 Power Supply Unit . . . . . . . . . . . . . . . . . . . . . . . 61

9.2 I/O Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

9.3 Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . 64

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Operating Manual ETERNUS JX40 S2

Contents

ETERNUS JX40 S2 Operating Manual 9

1 Introduction

The functionality, mechanics and design of the ETERNUS®JX40 S2 storage

subsystem are optimally adapted to the servers of Fujitsu Technology Solutions.

It is designed to be used as rack model. In the 19-inch rack, the

ETERNUS JX40 S2 subsystem occupies two height units.

The ETERNUS JX40 S2 storage subsystem can accommodate drives and

SSDs as follows:

A maximum of four ETERNUS JX40 S2 storage subsystems can be daisy-

chained in a connection to one RAID controller/HBA port.

Server Management/ServerView

(Only for connection to PRIMERGY servers and ServerView Suite package)

ServerView and the related agents are set up within the group of servers and

storage subsystems being monitored. The received informations are evaluated

by ServerView and processed for display or forwarding to the administrator

(manager).

IWhen installing ETERNUS JX40 S2 storage subsystem in connection

with ServerView please install the ServerView Suite V10.10.04 or higher

on each of the connected servers (will be implemented later).

Notes to installing and update see at the documentation of ServerView (see

also "Related Publications" on page 79).

2.5" Up to 24 drives including up to 4 SSDs

3.5" Up to 12 drives

10 Operating Manual ETERNUS JX40 S2

Target Group Introduction

1.1 Target Group

The operating instructions are intended for the person responsible for installing

the hardware and correctly operating the system. The operating instructions

contain all the descriptions which are of importance for commissioning your

ETERNUS JX40 S2 storage subsystem in so far as they do not form part of the

publication of your server system.

To understand the different expansion options it is necessary to have a

knowledge of hardware and data transmission, as well as basic knowledge of

the operating system used.

1.2 Structure of the Manual

The ETERNUS JX40 S2 storage subsystem manual describes how to install

and configure the subsystem and perform expansions or upgrades.

You will find further information in the documentation of your PRIMERGY server.

This manual consists of the following chapters:

●Important Notes

This chapter contains instructions on the safe operation of your storage

subsystem as well as information about environmental protection.

●Operating and Indicator Elements

This chapter gives a detailed description of the operating panel and the

connecting elements on the rear panel of the corresponding storage

subsystem.

●Hard Disk Drives

This chapter describes in detail how the hot-plug hard disk drives must be

dealt with.

●Connections

This chapter describes the SAS and the mains connection.

The possibilities of supplying the storage subsystem with mains voltage are

also described.

●Configurations

This part of the manual gives configuration examples.

Tabla de contenidos

Otros manuales de Almacenamiento de Fujitsu

Fujitsu

Fujitsu LTO-6 Manual de usuario

Fujitsu

Fujitsu ETERNUS DX100 S4 Manual técnico

Fujitsu

Fujitsu MHV2040AT - Hard Drive - 40 GB Manual de usuario

Fujitsu

Fujitsu MPG3409AT Manual de usuario

Fujitsu

Fujitsu MPA3017AT Manual de usuario

Fujitsu

Fujitsu MAU3036NC/NP Manual de usuario

Fujitsu

Fujitsu RDX USB 3.0 QuikStor Drive Manual de usuario

Fujitsu

Fujitsu PRIMERGY S10 Manual de usuario

Fujitsu

Fujitsu MHV2120BH Manual de usuario

Fujitsu

Fujitsu ETERNUS DX500 S4 Manual de usuario

Fujitsu

Fujitsu MAV2036RC - 36.7 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu Eternus DX80 S2 Manual de usuario

Fujitsu

Fujitsu MBB2147RC SERIES Manual de usuario

Fujitsu

Fujitsu ETERNUS Manual de instrucciones

Fujitsu

Fujitsu MHE2043AT Manual de usuario

Fujitsu

Fujitsu PRIMERGY PG-DTA101 Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Manual de usuario

Fujitsu

Fujitsu MHV2160BT - 160GB SATA/150 4200RPM 8MB Notebook Hard... Manual de usuario

Fujitsu

Fujitsu MHS2020AT Manual de usuario

Fujitsu

Fujitsu ETERNUS LT140 Manual de usuario

Fujitsu

Fujitsu MAB3091FC Series Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 Manual de usuario

Fujitsu

Fujitsu C141-E280 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario