Fujitsu FD-1100MT Manual de usuario

Preliminary Ver.0.50

SERVISTM Drawer

17inch [FD-1100MT]

NC14010-B452/xx

User's Manual

Operation of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense.

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules.

could void the user's authority to operate the equipment.

Changes or modifications not expressly approved by the party responsible for compliance

FCC WARNING:

Contents

This device has been classified as a Class A product by VCCI (Voluntary Control Council

for Interference by Information Technology Equipment). If you use this product in a

domestic environment, it may cause radio interference, in which case the user may be

held responsible for the cost of any required corrective action.VCCI-A

1. Preface ................................................................................... 1

1.1 Conventions ......................................................................................................................... 1

1.2 Packing List .......................................................................................................................... 1

2. Important Notices ................................................................... 2

2.1 Safety ................................................................................................................................... 3

2.2 Moving Console Drawer ....................................................................................................... 4

2.3 Disposal................................................................................................................................4

2.4 Safety Precautions and Limited Warranty Information.......................................................... 4

3. Installation .............................................................................. 6

3.1 Installing the Console Drawer (procedure for tapped guide rails) ......................................... 6

3.2 Installation Procedure........................................................................................................... 6

3.3 Installing the 4-port KVM Switch........................................................................................... 9

4. Connecting and Removing Cables........................................11

4.1 Connecting the Cables ........................................................................................................11

4.2 Removing Cables ................................................................................................................11

5. Connecting to Multiple Servers (with

a 4-port KVM Switch installed in the back of the Console Drawer.)............................ 12

6. Operation.............................................................................. 13

6.1 Operating the Console Drawer ........................................................................................... 13

6.2 Adjusting the Monitor .......................................................................................................... 15

6.2 Adjusting the Monitor .......................................................................................................... 16

6.3 Basic Adjustment Procedure .............................................................................................. 17

6.4 Main Menu Items................................................................................................................ 18

6.5 Resolutions and Refresh Rates.......................................................................................... 19

6.6 Caution: LCD display.......................................................................................................... 19

6.7 Keyboard Operation ........................................................................................................... 20

6.8 Pointing Device Operation.................................................................................................. 22

6.9 Hot-key and Reset Buttons................................................................................................. 23

6.10 Using a 4-port KVM Switch............................................................................................... 23

6.11 Stowing Console Drawer .................................................................................................. 24

7. Cleaning the Console Drawer .............................................. 25

8. Technical Specifications ....................................................... 27

9. Optional Accessories (Sold separately) ............................... 29

9.1 Optional Cables.................................................................................................................. 29

9.2 Optional Guide rails ............................................................................................................ 29

10. Troubleshooting.................................................................. 30

10.1 No image displayed on monitor ........................................................................................ 30

10.2 Monitor display is strange................................................................................................. 30

10.3 Monitor cannot be adjusted .............................................................................................. 31

10.4 Other Irregularities in Monitor Display .............................................................................. 31

10.5 Others............................................................................................................................... 32

1. Preface

Congratulations on your purchase of the server rack mountable Console Drawer (SERVIS™

DRAWER 17 inch). (hereinafter called "Console Drawer", "this product" or "this device")

Using this product will greatly improve the efficiency and functionality of the workspace

around your racks. Space that was used in previous layouts can now be used more freely

due to our compact sliding module design.

The 17-inch TFT monitor has a resolution of 1280 x 1024 dots with 16,770,000 colors.

Also, it is equipped with a keyboard and 3-button pointing device.

1.1 Conventions

Symbols and terminology that are used in this manual are described below.

This symbol indicates the possibility of physical damage (such as

damage to the Console Drawer) or physical injury, which may result if

the Console Drawer is operated incorrectly by ignoring this symbol.

This logo indicates supplemental information, comments or hints.

CAUTION

 Text that is preceded by a sequence of numbers (1, 2, etc.) means that the operations

must be performed in the indicated order.

 References to important chapter titles and terminology are in brackets [ ].

1.2 Packing List

Make sure that the items in the following list were included in the shipping package.

 Console Drawer x 1

 4 port KVM Switch Screws x 4 (in a nylon bad tapped to the Console Drawer)

 DC Cable x 1 (in a nylon bag taped to the Console Drawer)

 Operation Manual (this manual) x 1

We recommend keeping the box and packing material in which the Console Drawer was

purchased. They may be required when moving it to another location. If something is missing

from the package, contact your place of purchase or a Fujitsu sales person.

Similarly, as they will be needed when the 4-port KVM switch is installed, the 4-port KVM

switch screws and DC cable should be left taped to the Console Drawer.

Please note the safety information in [Important Notices].

to be used again.

CAUTION

1. Unpack the Console Drawer and check that it has not been damaged in transit.

2. Remove the rubber stabilizer from the front left side of the Console Drawer.

The rubber stabilizer is inserted to prevent the Console Drawer from

sliding when installing or moving it. Be sure to keep it after finishing the

installation for when it needs

Rubber stabilizer removal

2. Important Notices

Console Drawer

Rubber Stabilizer

Latch Lever

This chapter contains cautions that must be taken when operating the Console Drawer and

information related to safety. Carefully read this chapter to use the Console Drawer correctly.

2.1 Safety

Precautions

CAUTION

This device conforms to the safety regulations related to information processing equipment

such as electronic office machines that are used in an office environment. If you have any

questions please contact your place of purchase or a Fujitsu sales person.

 To prevent extreme bumping, shaking, vibration while moving the Console Drawer,

please use the original shipping container or a similar box, in addition make sure if it fits

well to the product for protection.

 During installation and before using the Console Drawer, carefully read [Installation] and

the section about environmental conditions in [Technical Specifications] to use the

Console Drawer correctly.

 Moving the Console Drawer from a cold environment to the installation location may

cause condensation to occur. Before using the Console Drawer allow it to dry out

completely and to reach the ambient temperature of the installation location.

 Make sure that the local power supply voltage is within the acceptable range of the

Console Drawer. Make sure that the rated voltage meets the specifications of this device

(Refer to [Technical Specifications] and the model plate on this device).

 The Console Drawer's power cable is specially certified. Do not connect it to anything

other than a rack power outlet in order to avoid electric shocks and/or short circuits.

 Arrange the adequate area to have the plug quickly pulled out around the Console

Drawer's power socket or the rack's power outlet .

 Lay all the cables so that they will not be damaged. Refer to the relevant sections in

[Installation] when connecting and removing cables.

 Do not connect or remove any cables during thunderstorms.

 Do not allow foreign substances (such as necklaces or paperclips) or liquids inside the

Console Drawer.

 In an emergency (such as: damage to the housing, parts or cables; or liquid or a foreign

object has fallen into the Console Drawer) remove the power cable as soon as possible

and contact your place of purchase or an authorized maintenance person.

 Do not disassemble or modify the Console Drawer for any purpose, which may cause

electric shocks, or fire and so on. Only licensed engineers may repair the Console

Drawer.

 Note that the corners of the open Console Drawer can be dangerous if bumped into.

Always be careful when the Console Drawer is open.

 It is recommended that the Console Drawer be stowed away in the rack when it is not in

use, or when other nearby servers or peripheral equipments are being used.

 Avoid using the keyboard when in poor health or for extended periods of time.

 Always hold the connector portion and do not jerk the cables when removing them.

 Avoid operating the Console Drawer with wet hands.

 Do not plug or unplug connectors with wet hands.

 Do not place such unnecessary items as cups on the top of the Console Drawer.

 Do not modify or repair the Console Drawer.

 Only licensed personnel may disassemble, remove or switch parts (such as power supply

units) that bear a warning mark (such as a lightning bolt mark).

 Only the resolutions and refresh rates specified in [Adjusting the Monitor] may be set.

Using settings other than those noted may damage the monitor. Contact your place of

purchase or a Fujitsu maintenance person if you have any questions.

 To prevent interference it is necessary to adequately isolate the data cables connected to

peripheral equipment.

 To cut off the power supply, unplug the power cable from the rack power outlet.

 Follow the instructions in the appropriate section in [Operation] when cleaning the server.

 Keep this manual with the Console Drawer at all times.

 Do not use the Console Drawer as a stepladder or lean against it with it drawn out.

Doing so may unbalance the rack, causing it to fall over.

 Some limited life components (such as the LCD, etc.) are included in this product. In

cases of extended continuous use, the performance of these components is easily

decreased.

 To avoid damage to this equipment or personal injury, return console drawer to its closed

position when not in use.

2.2 Moving Console Drawer

When moving the Console Drawer to a different location, use the box in

which it was purchased or a box that protects the product from bumping

and shaking. Do not unpack the Console Drawer until the move has

been completed.

CAUTION

2.3 Disposal

This device consists of metal, plastic, electronic parts and so on. Some

electronic components, such as LCD monitor, include lead. When it is

disposed of, follow exactly the relevant government regulations,

instructions and so on.

CAUTION

2.4 Safety Precautions and Limited Warranty Information

Fujitsu’s Products are not designed for use in medical or life support appliances, devices, or

systems where malfunction of a Product can reasonably be expected to result in a personal

injury. The Product is designed, developed and manufactured as contemplated for general

use, including, general office use, personal use, household use, and ordinary industrial use,

but is not for use for high risks or dangers that could reasonably be expected to result in

personal injury, or other loss including without limitation, nuclear application, aircraft flight

control, air traffic control, mass transport control, medical life support system, or missile

launch control in weapon system (“High Safety Required Use”). You should not use this

Product without securing sufficient safety required for such High Safety Required Use.

Purchaser and its customers using or selling Products for use in such applications do so at

their own risk and agree to fully indemnify Fujitsu for any damages resulting in such improper

use or sale.

Fujitsu Component Limited or its affiliates (“Fujitsu”) warrants all Product against defects in

materials and workmanship for a limited period not to exceed one (1) year from the date of

delivery to Fujitsu authorized distributor or authorized system integrator (“Authorized

Company”). Check with Fujitsu for such Authorized Company. Fujitsu’s liability under this

warranty is limited, at Fujitsu’s sole discretion, to repairing, or replacing any component with

new or like new components or parts, or replacing with a refurbished or alternative product,

or issuing credit for the purchase price, if paid, for such Product that was defective at the time

delivered to Purchaser, provided that Fujitsu will not be liable under this warranty unless: (i)

Fujitsu is promptly notified in writing upon the discovery of defects by Purchaser; (ii) the

defective unit is returned to Authorized Company, transportation charges prepaid by

Purchaser; (iii) the defective unit is received for adjustment no later than one year following

the date on which such Products were delivered by Fujitsu to Authorized Company; and (iv)

Fujitsu’s examination of such units shall disclose, to its satisfaction, that such defects have

not been caused by misuse, neglect, improper installation, repair, alteration, accident,

improper storage or other action or inaction beyond reasonable practice for such Product.

This warranty shall be administered and returned to the party from whom Purchaser

purchased Product which is an Authorized Company.

THE WARRANTY SET FORTH IN THIS SECTION IS IN LIEU OF, AND EXCLUDES, AND

EACH PARTY HEREBY WAIVES, ANY OTHER REPRESENTATIONS, GUARANTEES

AND WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A

PARTICULAR PURPOSE. IN NO EVENT SHALL FUJITSU BE LIABLE TO PURCHASER

FOR LOSS OF PROFITS, LOSS OF USE, COST OF SUBSTITUTE GOODS, OR

CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND BASED UPON A CLAIM

FOR BREACH OF WARRANTY OR OTHERWISE. FUJITSU'S WARRANTIES SHALL NOT

BE ENLARGED, DIMINISHED, OR AFFECTED BY, AND NO OBLIGATION OR LIABILITY

SHALL ARISE OR GROW OUT OF, SELLER'S RENDERING OF TECHNICAL ADVICE OR

SERVICE IN CONNECTION WITH BUYER'S ORDER OR THE PRODUCTS FURNISHED

HEREUNDER.

3. Installation

Please note the safety information in [Important Notices].

Drawer.

lar.

3.1 Installing the Console Drawer (procedure for tapped guide rails)

Observe the specified environmental conditions when using the

Console Drawer (See [Technical Specifications] for more information).

Avoid dust, humidity and extreme temperatures. Installation may

require two or more people in some situations. Be careful not to pinch

your fingers or hands between the guide rails and the Console Drawer.

3.2 Installation Procedure

1. Insert the rear spacer studs of the guide rails into the holes in the rear rack pillars. Extend

the guide rails to reach the inside of the front rack pillar. Fasten each guide rail with four

screws, one into each of the top and bottom holes of both the front and rear spacers.

(Install the left and right guide rails at the same height.)

2. Extend the guide rails to reach the inside of the front rack pillar.

Fasten each guide rail in place with two screws, one into each of the top and bottom

holes of the front spacer. (Attach the guide rails inside the front/rear rack pillar so

that the guides face inwards.)

3. Install the left and right guide rails at the same height.

Attach the guide rails so that they face inward and are open forward,

ready to accept the Console

Attach the guide rails inside the front/rear rack pil

See the "Installing the Guide Rails" diagra

CAUTION

Tabla de contenidos

Otros manuales de Almacenamiento de Fujitsu

Fujitsu

Fujitsu ETERNUS AF250 Guía

Fujitsu

Fujitsu ETERNUS JX40 S2 Manual de usuario

Fujitsu

Fujitsu MAU3036NC/NP Manual de usuario

Fujitsu

Fujitsu ETERNUS AB Series Manual técnico

Fujitsu

Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu MHW2160BJ Manual de usuario

Fujitsu

Fujitsu C141-E282 Manual de usuario

Fujitsu

Fujitsu M2488 Manual de usuario

Fujitsu

Fujitsu PG-HD9G1C Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S2 Manual de usuario

Fujitsu

Fujitsu ETERNUS DX S4 Series Manual de usuario

Fujitsu

Fujitsu GP5-HDH8B Manual de usuario

Fujitsu

Fujitsu MAB3091FC Series Manual de usuario

Fujitsu

Fujitsu MPG3409AT Manual de usuario

Fujitsu

Fujitsu GRANPOWER5000 Manual de usuario

Fujitsu

Fujitsu MHV2060AT Manual de usuario

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu ETERNUS LT160 Manual de usuario

Fujitsu

Fujitsu MHZ2040BH - Mobile 40 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS AF250 S2 Manual de usuario

Fujitsu

Fujitsu MHV2200BT Manual de usuario

Fujitsu

Fujitsu ETERNUS AF250 Manual de usuario

Fujitsu

Fujitsu MAP3147NP Manual de usuario

Fujitsu

Fujitsu MPB3021AT Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario