Fujitsu Eternus DX200F Manual de usuario
FUJITSU Storage
ETERNUS DX200F All Flash Array
Operation Guide (Basic)
P3AM-8472-01ENZ0
This page is intentionally left blank.
Preface
Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX200F All Flash Array (herein-
after referred to as ETERNUS DX200F or ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or
non-Fujitsu servers.
This manual describes the operation management and maintenance of the ETERNUS DX.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
Please carefully review the information outlined in this manual.
First Edition
May 2014
About This Manual
Organization
This manual is composed of the following six chapters:
•"Chapter 1 Component Name/LED Name" (page 12)
This chapter provides component names of the ETERNUS DX.
•"Chapter 2 Basic Operation" (page 19)
This chapter explains how to turn on and off the ETERNUS DX and how to operate the buttons on the oper-
ation panel.
•"Chapter 3 Storage System Monitoring" (page 25)
This chapter describes the status monitoring of the ETERNUS DX.
•"Chapter 4 Maintaining Optional Products " (page 29)
This chapter explains how to install drives and host ports in the ETERNUS DX and how to register the li-
cense.
•"Chapter 5 Maintenance" (page 39)
This chapter describes maintenance once the ETERNUS DX starts to be operated.
•"Chapter 6 Troubleshooting" (page 40)
This chapter explains troubleshooting when errors occur on the ETERNUS DX.
3
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
Registered Trademarks and Trademarks
•All SPARC trademarks are used under license from SPARC International, Inc. and are trademarks or regis-
tered trademarks of that company in the United States and other countries.
•UNIX is a registered trademark of The Open Group in the United States and other countries.
•Microsoft, Windows, Windows Server, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
•Oracle and Java are registered trademarks of Oracle and/or its affiliates.
•HP-UX is a trademark of Hewlett-Packard Company in the U.S. and other countries.
•Mozilla, Firefox, and the Mozilla and Firefox logos are trademarks or registered trademarks of the Mozilla
Foundation in the United States and other countries.
•Red Hat is a registered trademark of Red Hat, Inc. in the U.S. and other countries.
•Linux is a registered trademark of Linus Torvalds.
•SUSE is a registered trademark of Novell, Inc. in the United States and other countries.
•IBM, AIX, and Tivoli are trademarks of International Business Machines Corporation, registered in many ju-
risdictions worldwide.
•VMware, VMware logos, Virtual SMP, and vMotion are either registered trademarks or trademarks of
VMware, Inc. in the U.S. and/or other countries.
•The company names, product names and service names mentioned in this document are registered trade-
marks or trademarks of their respective companies.
•Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Naming Conventions
■Product Names
•The following abbreviations are used for Microsoft® Windows Server®.
Product name Abbreviation
Microsoft® Windows Server® 2008 Datacenter
Microsoft® Windows Server® 2008 R2 Datacenter
Windows Server 2008
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 for Itanium-Based Systems
Microsoft® Windows Server® 2008 R2 for Itanium-Based Systems
Microsoft® Windows Server® 2008 HPC Edition
Microsoft® Windows Server® 2008 R2 HPC Edition
Microsoft® Windows Server® 2012 Datacenter Windows Server 2012
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 Essentials
Preface
4
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
•The following abbreviations are used for Red Hat Linux.
Product name Abbreviation
Red Hat Enterprise Linux 5 (for x86)
Red Hat Enterprise Linux 5 (for Intel64)
Red Hat Enterprise Linux 5 (for Intel Itanium)
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6 (for x86)
Red Hat Enterprise Linux 6 (for Intel64)
Red Hat Enterprise Linux 6
■Symbols Used in This Manual
The following symbol is used throughout this manual:
This indicates information for the user to note when using the ETERNUS DX. Please be
sure to read this information.
This indicates supplementary and reference information.
■Abbreviations Used in This Manual
•"ETERNUS DX200F" or "ETERNUS DX" refers to the FUJITSU Storage ETERNUS DX200F All Flash Array.
•"CA" refers to a host interface module that is used in an ETERNUS DX to connect to a server.
•"Host Bus Adapter (HBA)" refers to the interface module that is normally used by the server to connect to
ETERNUS DX storage systems.
•Trademark symbols such as ™ and ® are omitted in this document.
Preface
5
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
Warning Signs
Warning signs are shown throughout this manual in order to prevent injury to the user and/or material dam-
age. These signs are composed of a symbol and a message describing the recommended level of caution.
The following explains the symbol, its level of caution, and its meaning as used in this manual.
This symbol indicates the possibility of serious or fatal injury if the ETERNUS DX is not
used properly.
This symbol indicates the possibility of minor or moderate personal injury, as well as
damage to the ETERNUS DX and/or to other users and their property, if the ETERNUS DX
is not used properly.
This symbol indicates IMPORTANT information for the user to note when using the ETER-
NUS DX.
The following symbols are used to indicate the type of warnings or cautions being described.
Electric Shock
The triangle emphasizes the urgency of the WARNING and CAUTION contents. Inside
the triangle and above it are details concerning the symbol (e.g. Electrical Shock).
No Disassembly
The barred "Do Not..." circle warns against certain actions. The action which must be
avoided is both illustrated inside the barred circle and written above it (e.g. No Disas-
sembly).
Unplug
The black "Must Do..." circle indicates actions that must be taken. The required ac-
tion is both illustrated inside the black disk and written above it (e.g. Unplug).
Preface
6
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
How Warnings are Presented in This Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical
ribbon in the left margin, to distinguish this warning from ordinary descriptions.
A display example is shown here.
Warning level indicator
Warning type indicator
Warning details
•To avoid damaging the ETERNUS DX, pay attention to the following points
when cleaning the ETERNUS DX:
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS DX when using
cleaners, etc.
- Do not use alcohol or other solvents to clean the ETERNUS DX.
Warning layout ribbon
Example warning
CAUTION Do
Preface
7
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
Table of Contents
Chapter 1 Component Name/LED Name 12
1.1 Front ............................................................................................................................................ 12
1.2 Rear.............................................................................................................................................. 13
1.3 Components (Front) .................................................................................................................... 13
1.4 Components (Rear) ..................................................................................................................... 15
Chapter 2 Basic Operation 19
2.1 Powering On and Off .................................................................................................................... 19
2.1.1 Switching On and Off the PSU Switch on the Power Supply Unit .........................................................................19
2.1.2 Powering On .......................................................................................................................................................21
2.1.3 Powering Off.......................................................................................................................................................22
2.2 Using the FUNCTION Button ......................................................................................................... 23
Chapter 3 Storage System Monitoring 25
3.1 Checking LED Status..................................................................................................................... 25
3.2 Displaying Status via ETERNUS Web GUI....................................................................................... 25
3.3 Displaying Status via ETERNUS CLI................................................................................................ 26
3.4 Event Notification......................................................................................................................... 27
3.5 Audit Log...................................................................................................................................... 28
Chapter 4 Maintaining Optional Products 29
4.1 Installing Additional Drives .......................................................................................................... 29
4.1.1 Installable Drives ................................................................................................................................................29
4.1.2 Drive Handling Instructions ................................................................................................................................30
4.1.3 Additional Drive Installation Procedure ..............................................................................................................31
4.2 Adding Servers ............................................................................................................................. 33
4.2.1 RAID Group Creation ...........................................................................................................................................33
4.2.2 Volume Creation .................................................................................................................................................34
4.2.3 Connection Setup................................................................................................................................................35
Chapter 5 Maintenance 39
8
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
5.1 Periodic Backup............................................................................................................................ 39
5.2 Maintenance Service .................................................................................................................... 39
5.2.1 Maintenance Support Period ..............................................................................................................................39
5.2.2 Related Service ...................................................................................................................................................39
Chapter 6 Troubleshooting 40
6.1 Check List ..................................................................................................................................... 40
6.2 Required Information for Inquiries ............................................................................................... 46
Table of Contents
9
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
List of Figures
Figure 1.1 Front View of a Controller Enclosure.........................................................................................................12
Figure 1.2 Rear View of a Controller Enclosure ..........................................................................................................13
Figure 1.3 Operation Panel .......................................................................................................................................13
Figure 1.4 Drives ......................................................................................................................................................14
Figure 1.5 Drive Slot Numbers ..................................................................................................................................15
Figure 1.6 Controllers................................................................................................................................................15
Figure 1.7 Host Interface for FC Cable Connection (Installed in a Controller) ............................................................17
Figure 1.8 Host Interface for Copper Twinax Cable Connection (Installed in a Controller) .........................................17
Figure 1.9 Power Supply Unit ....................................................................................................................................18
Figure 2.1 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit ........................................................19
Figure 2.2 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit ......................................................20
Figure 3.1 ETERNUS Web GUI Screen.........................................................................................................................25
Figure 3.2 Event Notification ....................................................................................................................................28
Figure 3.3 Audit Log..................................................................................................................................................28
10
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0
Otros manuales para Eternus DX200F
2
Tabla de contenidos
Otros manuales de Almacenamiento de Fujitsu
Fujitsu
Fujitsu MHV2160BT Manual de usuario
Fujitsu
Fujitsu MHW2160BJ Manual de usuario
Fujitsu
Fujitsu ETERNUS DX Disk Manual de usuario
Fujitsu
Fujitsu MAS3184NC/NP Manual de usuario
Fujitsu
Fujitsu ETERNUS DX60 S3 Manual de usuario
Fujitsu
Fujitsu ETERNUS DX60 S2 Manual de usuario
Fujitsu
Fujitsu ETERNUS DX60 Manual de usuario
Fujitsu
Fujitsu Eternus DX80 S2 Manual de usuario
Fujitsu
Fujitsu MBC2036RC SERIES Manual de usuario
Fujitsu
Fujitsu ETERNUS SF Express V16.6 Manual de usuario
Fujitsu
Fujitsu Eternus DX500 S3 Manual técnico
Fujitsu
Fujitsu MPG3409AT Manual de usuario
Fujitsu
Fujitsu SPARC S7-2 Manual de usuario
Fujitsu
Fujitsu M2266S Nota de versión
Fujitsu
Fujitsu ETERNUS AF250 S2 Instrucciones de montaje
Fujitsu
Fujitsu MHW2060BK - Mobile 60 GB Hard Drive Manual de usuario
Fujitsu
Fujitsu PG-HDH61D Manual de usuario
Fujitsu
Fujitsu MBB2147RC SERIES Manual de usuario
Fujitsu
Fujitsu MHT2020AT Manual de usuario
Fujitsu
Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario