Fujitsu ETERNUS AF250 S2 Manual técnico
FUJITSU Storage
ETERNUS AF250 S2,
ETERNUS AF250
All-Flash Arrays
Site Planning Guide
Requirements for transportation/installation
P3AG-1812-06ENZ0
Table of Contents
1. ETERNUS AF Installation 7
Installation Specifications............................................................................................................... 7
ETERNUS AF250 S2..................................................................................................................................................7
ETERNUS AF250.......................................................................................................................................................9
Storage System Dimensions.......................................................................................................... 11
Compliance Standards .................................................................................................................. 13
Package Size ................................................................................................................................. 14
Installation Area ........................................................................................................................... 15
Installation Environment .............................................................................................................. 16
Installation of the ETERNUS AF in High Altitude Locations ....................................................................................16
Air Conditioning ....................................................................................................................................................16
Installation Methods.............................................................................................................................................17
Load Bearing Capacity for Floors ...........................................................................................................................17
Outlet/Socket Specifications.......................................................................................................... 17
Specifications for Optional Power Supply Products ................................................................................................18
Required Number of Outlets/Sockets.....................................................................................................................23
Circuit Protectors ...................................................................................................................................................23
Input Power Supply Lines ......................................................................................................................................28
2. Rack Installation Specifications 31
Rack Installation Requirements .................................................................................................... 31
Placement in the Rack ..........................................................................................................................................31
Cable Connection ..................................................................................................................................................32
Installable Racks........................................................................................................................... 35
Fujitsu Racks .........................................................................................................................................................35
Non-Fujitsu Racks .................................................................................................................................................35
2
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
List of Figures
Figure 1 Controller Enclosure Dimensions..............................................................................................................11
Figure 2 Drive Enclosure Dimensions .....................................................................................................................12
Figure 3 Installation Area and Service Area............................................................................................................15
Figure 4 Power Distribution Units (AC8A/200-240V, 1U, 4 Outlets, 2 Inlets) ..........................................................20
Figure 5 Power Distribution Units (AC24A/200-240V, 1U, 4 Outlets, 1 Inlet)..........................................................20
Figure 6 Power Distribution Units (2U) ..................................................................................................................21
Figure 7 Power Distribution Units (2U) ..................................................................................................................22
Figure 8 Breaking Characteristics of Distribution Board Circuit Protectors ..............................................................24
Figure 9 Example of a Power Supply Connection When a Power Distribution Unit (1U) Is Used .............................25
Figure 10 Example of a Power Supply Connection When a Power Distribution Unit (2U) Is Used .............................26
Figure 11 Example of a Power Supply Connection When a Power Distribution Unit Is Not Used...............................28
Figure 12 Dual-Line Power Supply (When Connecting to Power Sockets).................................................................28
Figure 13 Dual-Line Power Supply (When Connecting to a UPS Unit).......................................................................29
Figure 14 Single-Line Power Supply (When Connecting to Power Sockets) ..............................................................29
Figure 15 Single-Line Power Supply (When Connecting to a UPS Unit) ....................................................................29
Figure 16 Single-Line Power Supply (When Connecting to a Power Socket and a UPS Unit).....................................29
Figure 17 Distance between Each Enclosure and the Power Distribution Unit (Example) ........................................32
Figure 18 AC Cable Connection.................................................................................................................................33
Figure 19 Unit Installation Area ...............................................................................................................................36
3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
List of Tables
Table 1 ETERNUS AF250 S2 Installation Specifications............................................................................................7
Table 2 Efficiency and Power Factor of the Power Supply Unit (ETERNUS AF250 S2)...............................................8
Table 3 ETERNUS AF250 Installation Specifications.................................................................................................9
Table 4 Package Size (for Regions other than the EMEIA, Central American, and Caribbean Regions) .................14
Table 5 Current Consumption of Each Power Cord.................................................................................................17
Table 6 Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions) .........18
Table 7 Specifications for AC200V Power Cords (for Regions other than the EMEIA, Central American, and Carib-
bean Regions)..........................................................................................................................................18
Table 8 Specifications for AC125V Power Cords (for Regions other than the EMEIA, Central American, and Carib-
bean Regions)..........................................................................................................................................19
Table 9 Specifications for AC100V and AC200V Power Cords (for Regions other than the EMEIA, Central American,
and Caribbean Regions)...........................................................................................................................19
Table 10 Specifications for Power Distribution Units (AC8A/200-240V, 1U, 4 Outlets, 2 Inlets)...............................20
Table 11 Specifications for Power Distribution Units (AC24A/200-240V, 1U, 4 Outlets, 1 Inlet) ..............................20
Table 12 Power Distribution Unit (AC200-240V, 2U, 12 Outlets) Specifications ......................................................21
Table 13 Power Distribution Unit (AC200-240V, 2U, 16 Outlets) Specifications ......................................................21
Table 14 Power Distribution Unit (AC16A/200-240V, 2U, 16 Outlets) Specifications ...............................................22
Table 15 Power Distribution Unit (AC24A/200-240V, 2U, 16 Outlets) Specifications ...............................................22
Table 16 Required Conditions for Distribution Board Circuit Protectors...................................................................23
Table 17 Enclosure Installation Order .....................................................................................................................31
Table 18 Cable Lengths When Connecting Each Enclosure to the Power Distribution Unit......................................32
Table 19 Usage of Cables for Connecting Enclosures...............................................................................................34
Table 20 Specifications for the Unit Installation Area .............................................................................................36
4
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
Preface
Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 (herein-
after referred to as ETERNUS AF).
The ETERNUS AF is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY,
and other servers) or non-Fujitsu servers.
This manual describes the environmental requirements that are necessary to install and use the ETERNUS AF.
This manual is intended for use of the ETERNUS AF in regions other than Japan.
Please carefully review the information outlined in this manual.
Sixth Edition
June 2021
Trademarks
Third-party trademark information related to this product is available at:
https://www.fujitsu.com/global/products/computing/storage/eternus/trademarks.html
About This Manual
Intended Audience
This manual is intended for managers of facilities where the ETERNUS AF is installed.
Related Information and Documents
The latest version of this manual and the latest information for your model are available at:
https://www.fujitsu.com/global/support/products/computing/storage/manuals-list.html
Document Conventions
■Third-Party Product Names
•Oracle Solaris may be referred to as "Solaris", "Solaris Operating System", or "Solaris OS".
•Microsoft® Windows Server® may be referred to as "Windows Server".
■Notice Symbols
The following notice symbols are used in this manual:
Indicates information that you need to observe when using the ETERNUS storage system.
Make sure to read the information.
Indicates information and suggestions that supplement the descriptions included in this
manual.
5
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
Warning Signs
Warning signs are shown throughout this manual in order to prevent injury to the user and/or material damage.
These signs are composed of a symbol and a message describing the recommended level of caution. The follow-
ing explains the symbol, its level of caution, and its meaning as used in this manual.
This symbol indicates the possibility of serious or fatal injury if the ETERNUS AF is not used
properly.
This symbol indicates the possibility of minor or moderate personal injury, as well as dam-
age to the ETERNUS AF and/or to other users and their property, if the ETERNUS AF is not
used properly.
This symbol indicates IMPORTANT information for the user to note when using the ETERNUS
AF.
The following symbols are used to indicate the type of warnings or cautions being described.
The triangle emphasizes the urgency of the WARNING and CAUTION contents. Inside the
triangle and above it are details concerning the symbol (e.g. Electrical Shock).
The barred "Do Not..." circle warns against certain actions. The action which must be
avoided is both illustrated inside the barred circle and written above it (e.g. No Disassem-
bly).
The black "Must Do..." circle indicates actions that must be taken. The required action is
both illustrated inside the black disk and written above it (e.g. Unplug).
How Warnings are Presented in This Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical rib-
bon in the left margin, to distinguish this warning from ordinary descriptions.
A display example is shown here.
Warning level indicator
Warning type indicator
Warning details
•To avoid damaging the ETERNUS storage system, pay attention to the
following points when cleaning the ETERNUS storage system:
Warning layout ribbon
Example warning
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS storage system
when using cleaners, etc.
- Do not use alcohol or other solvents to clean the ETERNUS storage system.
CAUTION Do
Preface
6
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
1. ETERNUS AF Installation
This chapter provides the installation specification of the ETERNUS AF.
Installation Specifications
ETERNUS AF250 S2
Table 1 shows the installation specifications of the ETERNUS AF250 S2 and Table 2 shows the efficiency and the
power factor of the power supply unit.
Table 1 ETERNUS AF250 S2 Installation Specifications
Item ETERNUS AF250 S2
Dimensions
(W ´ D ´ H)
Controller enclosure 482 ´ 645 ´ 88mm (2U)
Drive enclosure 482 ´ 540 ´ 88mm (2U)
Power distribution unit
(*1)
1U 435 ´ 148 ´ 38mm (*2),
482 ´ 111 ´ 44mm (*3)
2U (*4) (485 ´ 280 ´ 43mm) ´ 2 (*5),
(485 ´ 123 ´ 44mm) ´ 2 (*6)
Maximum weight (*7) Controller enclosure 35kg
Drive enclosure 35kg
Power distribution unit
(*1)
1U 2.0kg (*2),
2.5kg (*3)
2U (*4) (6.0kg) ´ 2 (*5),
(3.0kg) ´ 2 (*6)
Power Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Maximum power con-
sumption (*7)
Controller enclosure AC 100 – 120V 850W (860VA)
AC 200 – 240V 850W (860VA)
Drive enclosure AC 100 – 120V 430W (440VA)
AC 200 – 240V 430W (440VA)
Maximum heat genera-
tion (*7)
Controller enclosure AC 100 – 120V 3,100kJ/h
AC 200 – 240V 3,100kJ/h
Drive enclosure AC 100 – 120V 1,600kJ/h
AC 200 – 240V 1,600kJ/h
Maximum amount of ex-
haust air
Controller enclosure 4.0m3/min
Drive enclosure 4.0m3/min
7
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
Item ETERNUS AF250 S2
Environmental conditions Temperature Operating 10 – 40°C
Not operating 0 – 50°C
Shipping -40 – 60°C
Temperature gradient 15°C/Hr or less
Humidity Operating 20 – 80%RH
Not operating 8 – 80%RH
Shipping 8 – 90%RH
Humidity gradient 30%/day or less
Maximum wet bulb temperature 29°C
Altitude above sea level 0 – 3,000m
Airborne dust 0.15mg/m3 or less
Gas concentration tolerance level Cl2: 6.8ppb or less, H2S: 7.1ppb or less,
SO2: 37ppb or less, NH3: 423.5ppb or less,
NO2: 52ppb or less, O3: 5ppb or less,
HCl: 6.6ppb or less, HF: 3.6ppb or less
Oil vapor 0.2mg/m3 or less
Seawater (salt corrosion) If the ETERNUS AF is installed on the ocean or
premises within 0.5km from the coast, neces-
sary measures must be taken to prevent salt
corrosion.
Vibration limit Operating 400gal
Not operating 1,000gal
Noise emission (*8) Sound pressure level 47dB (A)
Sound power level 6.5B
*1: For power distribution units, there are multiple types of exteriors. For details, refer to "Specifications for
Optional Power Supply Products" (page 18).
*2: These values are for product ID ETFP4BU-L.
*3: These values are for product ID ETFP4DU-L.
*4: A 2U power distribution unit is composed of two 1U power distribution units.
*5: These values are for product ID ETFP16U-L / ETFP12U-L.
*6: These values are for product ID ETFP48U-L / ETFP32U-L.
*7: These values are for each enclosure when 24 drives are installed.
*8: These values are measured when a single controller enclosure and a single drive enclosure are configured
in an environment in which the temperature is 23 ± 2°C at 0 meters above sea level.
Table 2 Efficiency and Power Factor of the Power Supply Unit (ETERNUS AF250 S2)
Component name 80PLUS®Efficiency Power fac-
tor Output
20% (*1) 50% (*1) 100% (*1) 50% (*1)
Controller enclosure GOLD (*2) 89.3% 92.5% 90.2% 0.975 Multiple output
Drive enclosure 89.3% 92.5% 90.2% 0.975
*1: Indicates the rated load against the rated output of the PSU.
1. ETERNUS AF Installation
Installation Specifications
8
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
*2: 80PLUS® GOLD certified power supply units are used. 80PLUS® is a power saving program for electrical
equipment promoted by the 80PLUS® program.
ETERNUS AF250
The following table shows the installation specifications of the ETERNUS AF250.
Table 3 ETERNUS AF250 Installation Specifications
Item ETERNUS AF250
Dimensions
(W ´ D ´ H)
Controller enclosure 482 ´ 645 ´ 88mm (2U)
Drive enclosure 482 ´ 540 ´ 88mm (2U)
Power distribution unit
(*1)
1U 435 ´ 148 ´ 38mm (*2),
482 ´ 111 ´ 44mm (*3)
2U (*4) (485 ´ 280 ´ 43mm) ´ 2 (*5),
(485 ´ 123 ´ 44mm) ´ 2 (*6)
Maximum weight (*7) Controller enclosure 35kg
Drive enclosure 35kg
Power distribution unit
(*1)
1U 2.0kg (*2),
2.5kg (*3)
2U (*4) (6.0kg) ´ 2 (*5),
(3.0kg) ´ 2 (*6)
Power Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Maximum power con-
sumption (*7)
Controller enclosure AC 100 – 120V 810W (820VA)
AC 200 – 240V 810W (820VA)
Drive enclosure AC 100 – 120V 430W (440VA)
AC 200 – 240V 430W (440VA)
Maximum heat genera-
tion (*7)
Controller enclosure AC 100 – 120V 3,000kJ/h
AC 200 – 240V 3,000kJ/h
Drive enclosure AC 100 – 120V 1,600kJ/h
AC 200 – 240V 1,600kJ/h
Maximum amount of ex-
haust air
Controller enclosure 4.0m3/min
Drive enclosure 4.0m3/min
1. ETERNUS AF Installation
Installation Specifications
9
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
Item ETERNUS AF250
Environmental conditions Temperature Operating 10 – 40°C
Not operating 0 – 50°C
Shipping -40 – 60°C
Temperature gradient 15°C/Hr or less
Humidity Operating 20 – 80%RH
Not operating 8 – 80%RH
Shipping 8 – 90%RH
Humidity gradient 30%/day or less
Maximum wet bulb temperature 29°C
Altitude above sea level 0 – 3,000m
Airborne dust 0.15mg/m3 or less
Gas concentration tolerance level Cl2: 6.8ppb or less, H2S: 7.1ppb or less,
SO2: 37ppb or less, NH3: 423.5ppb or less,
NO2: 52ppb or less, O3: 5ppb or less,
HCl: 6.6ppb or less, HF: 3.6ppb or less
Oil vapor 0.2mg/m3 or less
Seawater (salt corrosion) If the ETERNUS AF is installed on the ocean or
premises within 0.5km from the coast, neces-
sary measures must be taken to prevent salt
corrosion.
Vibration limit Operating 400gal
Not operating 1,000gal
Noise emission (*8) Sound pressure level 47dB (A)
Sound power level 6.5B
*1: For power distribution units, there are multiple types of exteriors. For details, refer to "Specifications for
Optional Power Supply Products" (page 18).
*2: These values are for product ID ETFP4BU-L.
*3: These values are for product ID ETFP4DU-L.
*4: A 2U power distribution unit is composed of two 1U power distribution units.
*5: These values are for product ID ETFP16U-L / ETFP12U-L.
*6: These values are for product ID ETFP48U-L / ETFP32U-L.
*7: These values are for each enclosure when 24 drives are installed.
*8: These values are measured when a single controller enclosure and a single drive enclosure are configured
in an environment in which the temperature is 23 ± 2°C at 0 meters above sea level.
1. ETERNUS AF Installation
Installation Specifications
10
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Site Planning Guide
Copyright 2021 FUJITSU LIMITED
P3AG-1812-06ENZ0
Otros manuales para ETERNUS AF250 S2
3
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Almacenamiento de Fujitsu
Fujitsu
Fujitsu MBA3073NC Manual de usuario
Fujitsu
Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS... Manual de usuario
Fujitsu
Fujitsu MPD3XXXAH Manual de usuario
Fujitsu
Fujitsu MHW2080AT - Mobile 80 GB Hard Drive Manual de usuario
Fujitsu
Fujitsu ETERNUS AX Series Manual de usuario
Fujitsu
Fujitsu ETERNUS JX40 S2 Manual de usuario
Fujitsu
Fujitsu MBC2073RC SERIES Manual de usuario
Fujitsu
Fujitsu GRANPOWER 5000 GP5-HDH451 Manual de usuario
Fujitsu
Fujitsu MHV2100BH Manual de usuario
Fujitsu
Fujitsu PRIMERGY LTO4 Manual de usuario
Fujitsu
Fujitsu M2266S Nota de versión
Fujitsu
Fujitsu Eternus DX500 S3 Manual técnico
Fujitsu
Fujitsu ETERNUS LT260 Manual de usuario
Fujitsu
Fujitsu MAY2036RC Product/ Manual de usuario
Fujitsu
Fujitsu MHG2102AT - Mobile 10 GB Hard Drive Manual de usuario
Fujitsu
Fujitsu MAB3091FC Series Manual de usuario
Fujitsu
Fujitsu Eternus DX200F Manual de usuario
Fujitsu
Fujitsu MHV2200BT Manual de usuario
Fujitsu
Fujitsu MAP3147NC - Enterprise - Hard Drive Manual de usuario
Fujitsu
Fujitsu ETERNUS DX60 S2 Manual de usuario
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario