Fujitsu PRIMERGY TX120 S2 Manual de usuario
PRIMERGY TX120 S2 Server
Options Guide
Edition April 2009
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2009 Fujitsu Technology Solutions GmbH.
All rights are reserved.
Delivery subject to availability. The right to technical modification is reserved.
All hardware and software names used are trade names and/or trademarks of their respective
manufacturers.
TX120 S2 Options Guide
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.2 Concept and target groups . . . . . . . . . . . . . . . . . . . 6
1.3 Documentation overview . . . . . . . . . . . . . . . . . . . . 7
1.4 Expansions and conversions . . . . . . . . . . . . . . . . . . 9
1.5 Notational conventions . . . . . . . . . . . . . . . . . . . . 10
2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.1 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 19
4.2 Removing the crosspiece . . . . . . . . . . . . . . . . . . . 20
4.3 Removing the drive cage . . . . . . . . . . . . . . . . . . . 21
5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.1 Equipping rules . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.2 Expanding/replacing the main memory . . . . . . . . . . . . 25
6 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . 27
6.1 Installing an HDD extension box . . . . . . . . . . . . . . . 27
6.2 Installing a backup drive . . . . . . . . . . . . . . . . . . . . 31
7 Expansion cards in the PCI slots . . . . . . . . . . . . . . . 37
OptionsGuide TX120 S2
Contents
7.1 PCI slot overview . . . . . . . . . . . . . . . . . . . . . . . . 37
7.2 Installing an expansion card . . . . . . . . . . . . . . . . . . 38
8 Trusted Platform Module (TPM) . . . . . . . . . . . . . . . . . 45
9 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
9.1 Installing the drive cage . . . . . . . . . . . . . . . . . . . . . 41
9.2 Installing the crosspiece . . . . . . . . . . . . . . . . . . . . 43
9.3 Assembling the server . . . . . . . . . . . . . . . . . . . . . 44
10 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
10.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
TX120 S2 Options Guide 5
1 Introduction
The PRIMERGY TX120 S2 server is an Intel-based server for small and
medium-sized networks and can be used in the horizontal position or as a
desktop model.
The PRIMERGY TX120 S2 server features exceptionally low energy
consumption, very quiet running and a compact size. As a result, it is also the
ideal solution for home and small offices.
Thanks to its highly developed hardware and software components, the
PRIMERGYTX120 S2serveroffersahighlevel ofdatasecurityandavailability.
These include hot-plug HDD modules, the ServerView server management
software, Prefailure Detection and Analysing (PDA) and Automatic Server
Reconfiguration and Restart (ASR&R).
Security functions in the BIOS-setup protect the data on the server against
manipulation. Additional security is provided by the lockable drive cover.
6 OptionsGuide TX120 S2
ENERGY STAR Introduction
1.1 ENERGY STAR
1.2 Concept and target groups
This Options Guide shows you how to extend and upgrade your server.
VCAUTION!
The activities described in this manual may only be performed by
technical specialists.
IThe installation and removal of the hot-plug components is described in
the Operating Manual supplied with the server.
In some particular configurations1the PRIMERGY TX120 S2 is
equipped with a power management system which, in energy-
saving mode, reduces the power consumption to <65 W. The
server thus satisfies the requirements of the U.S. Environmental
Protection Agency (EPA).
The EPA estimates that computer systems use around 5 % of all
electricity in the office sector and that this figure is growing
rapidly. If all computer systems and peripherals were placed in
energy-saving mode when not in use, the overall savings in
electricity could amount to some US $ 2 billion annually. These
savings would also prevent the emission of 20 million tons of
carbon dioxide into the atmosphere - equivalent to theemissions
from 5 million automobiles.
As an ENERGY STAR partner, Fujitsu Technology Solutions
GmbH has determined that in some particular configurations this
product meets the ENERGY STAR guidelines for energy
efficiency.
1These servers are always delivered with a particular setting in the BIOS setup. For details
please see the manual “D2785 BIOS Setup Utility for PRIMERGY TX120 S2” on the
PRIMERGY ServerView Suite DVD 2.
TX120 S2 Options Guide 7
Introduction Documentation overview
1.3 Documentation overview
More information on your PRIMERGY TX120 S2 can be found in the following
documents:
– “Quick Start Hardware - PRIMERGY TX120 S2” leaflet (only included as a
printed copy)
– “Quick Start Software - Quick Installation Guide” DVDbooklet (only included
with the PRIMERGY ServerView Suite as a printed copy)
– “Safety notes and other important information” manual
– “Warranty” manual
– “PRIMERGY ServerView Suite Local Service Concept - LSC” manual
– “Returning used devices” manual
– “Helpdesk” leaflet
– Technical manual for the system board D2785
– “PRIMERGY TX120 S2 Server Operating Manual”
– “PRIMERGY TX120 S2 Server Options Guide”
– “D2785 BIOS Setup Utility für PRIMERGY TX120 S2“ manual
IFurther information on SAS/SATA RAID controllers is provided in the
“Modular RAID Controller Installation Guide” (on PRIMERGY
ServerViewSuiteDVD 2underIndustry Standard Servers -Expansion Cards
- Storage Adapters - LSI RAID / SCSI Controllers).
Further information on other SAS/SATA RAID controllers (e.g. for
operatingexternalSAS/SATA harddisk drives ortapedrives)is available
on PRIMERGY ServerView Suite DVD 2 under Industry Standard Servers
- Expansion Cards - Storage Adapters - LSI RAID / SCSI Controllers.
8 OptionsGuide TX120 S2
Documentation overview Introduction
IPRIMERGY manuals are available in PDF format on the PRIMERGY
ServerView Suite DVD 2. The PRIMERGY ServerView Suite DVD 2 is
part of the PRIMERGY ServerView Suite supplied with every server.
If you no longer have the ServerView Suite DVDs, you can obtain the
relevant current versions using the order number U15000-C289.
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL:
http://manuals.ts.fujitsu.com. The PRIMERGY server documentation can
be accessed using the Industry standard servers navigation option.
Further sources of information:
– PRIMERGY Abbreviations and Glossary on the PRIMERGY
ServerView Suite DVD 2
– Manual for the monitor
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
TX120 S2 Options Guide 9
Introduction Expansions and conversions
1.4 Expansions and conversions
Main memory expansion
The system board supports up to 16 Gbyte of main memory. 4 slots (2 memory
banks with 2 slots each) are provided for the main memory. Each memory bank
can be equippeded with 1 GB, 2 GB or 4 GB unbuffered DDR2 memory
modules.
If the memory modules are installed in pairs, they must be identical (2-way inter-
leaved mode).
Additional accessible drive
A 3.5-inch bay for an HDD extension box or a backup drive is available.
Expansion cards in the PCI slots
The following PCI slots are provided by the system board:
PCI slot Description
1 PCI Express x8 slot
2 PCI Express x8 slot
3 PCI slot (32-bit/33MHz)
4 PCI Express x8 slot
10 OptionsGuide TX120 S2
Notational conventions Introduction
1.5 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
“Quotation marks” indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
Otros manuales para PRIMERGY TX120 S2
2
Tabla de contenidos
Otros manuales de Servidor de Fujitsu
Fujitsu
Fujitsu PRIMERGY RX600 S3 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 1000 Series Instrucciones de montaje
Fujitsu
Fujitsu BX630 - PRIMERGY - S2 Dual Manual del propietario
Fujitsu
Fujitsu PRIMEQUEST 520A Manual técnico
Fujitsu
Fujitsu PRIMERGY TX100 S3 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de servicio
Fujitsu
Fujitsu PRIMERGY TX150 S6 Manual de usuario
Fujitsu
Fujitsu PRIMERGY CX400 M1 Guía del usuario
Fujitsu
Fujitsu FUTRO A300 Manual de usuario
Fujitsu
Fujitsu FUTRO S9011 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de servicio
Fujitsu
Fujitsu SPARC Enterprise M4000 Guía de instalación
Fujitsu
Fujitsu PRIMEQUEST 1000 Series Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de servicio
Fujitsu
Fujitsu PRIMERGY TX150 S7 Manual de usuario
Fujitsu
Fujitsu 200/200R Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX300 S3 Manual de usuario
Fujitsu
Fujitsu PRIMERGY BX300 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX200 S7 Guía del usuario
Fujitsu
Fujitsu Primergy RX4770 M1 Manual de usuario
