Fujitsu PRIMERGY RX4770 M5 Manual de usuario

FUJITSU Server PRIMERGY RX4770 M5

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

01/2022

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de/en/

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

RX4770 M5 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual RX4770 M5

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

RX4770 M5 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 04/2019 Initial release

V 2.0 10/2019 Update

V 3.0 07/2020 CMOS battery updated

V 4.0

10/2021 Following sections were updated

–Verifying system information backup/restore

– Replacing the CMOS battery

– Replacing the system board

– Installing an expansion card updated with

SAS CP500i RAID controller

01/2022 Following sections were updated

–Replacing the CMOS battery

– Slots and bolts for M.2 SSD

– Memory population conditions

Upgrade and Maintenance Manual RX4770 M5

Content

1 Introduction 17

1.1 Concept and target groups of this manual 17

1.2 Notational conventions 17

2 Before you start 19

2.1 Basic information 19

2.1.1 Proceeding 19

2.1.2 Advanced Thermal Design (ATD) 19

2.1.3 Installing optional components 20

2.1.4 Replacing a defective component 20

2.2 Classification of procedures 21

2.2.1 Assignment of unit categories 21

2.2.2 Customer Replaceable Units (CRU) 21

2.2.3 Upgrade and Repair Units (URU) 22

2.2.4 Field Replaceable Units (FRU) 23

2.3 Average task duration 25

2.4 Tools you need at hand 26

2.5 Documentation overview 26

2.5.1 Downloading manuals 26

2.5.2 List of documents 26

3 Important information 29

3.1 Introduction 29

3.2 Safety instructions 29

3.2.1 Basic safety instructions 29

3.2.2 Before starting up 30

RX4770 M5 Upgrade and Maintenance Manual

3.2.3 Installation and operation 30

3.2.4 Batteries 33

3.2.5 Working with optical disk drives (ODDs) and media 33

3.2.6 Laser information 35

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 35

3.2.8 Transporting the server 37

3.2.9 Installing the server in the rack 38

3.2.10 Other important information 38

3.3 ENERGY STAR 39

3.4 CE conformity 39

3.5 FCC Class A Compliance Statement 40

3.6 Environmental protection 41

4 Basic hardware procedures 43

4.1 Using diagnostic information 43

4.1.1 Proceeding 43

4.1.2 Locating the defective server 43

4.1.3 Determining the error class 44

4.1.4 Locating the defective component 44

4.2 Shutting down the server 45

4.3 Disconnecting the power cord 46

4.4 Getting access to the component 47

4.4.1 Safety notes 47

4.4.2 Extending the server out of the rack 48

4.4.3 Removing the server from the rack 49

4.4.4 Removing the top covers 51

4.5 Reassembling 53

4.5.1 Safety notes 53

4.5.2 Installing the top covers 53

4.5.3 Installing the server in the rack 55

4.5.4 Sliding the server into the rack 57

Content

Upgrade and Maintenance Manual RX4770 M5

4.6 Connecting the power cord (AC PSU) 58

4.7 Switching on the server 59

4.8 Handling riser modules 60

4.8.1 Positions of riser modules 60

4.8.2 Removing the riser module 3/4 and 6/7 61

4.8.3 Installing the riser module 3/4 and 6/7 62

4.8.4 Removing the riser module 64

4.8.5 Installing the riser module 65

4.9 Handling the OCP dummy cover 67

4.9.1 Installing the OCP dummy cover 67

4.9.2 Removing the OCP dummy cover 68

4.10 Handling the fan cage 69

4.10.1 Removing the fan cage 69

4.10.2 Installing the fan cage 71

4.11 Handling the CPU air duct 72

4.11.1 Removing the CPU air duct 72

4.11.2 Installing the CPU air duct 74

4.12 Handling the top system board holder 74

4.12.1 Removing the top system board holder 74

4.12.2 Installing the top system board holder 79

5 Basic software procedures 85

5.1 Validation 85

5.2 Starting the maintenance task 85

5.2.1 Suspending BitLocker functionality 85

5.2.2 Disabling the boot watchdog 86

5.2.3 Removing backup and optical disk media 88

5.2.4 Verifying and configuring the backup software solution 88

5.2.5 Switching on the ID indicator 88

5.3 Completing the maintenance task 89

5.3.1 Updating or recovering the BIOS and iRMC S5 89

Content

RX4770 M5 Upgrade and Maintenance Manual

5.3.2 Verifying system information backup or restore 92

5.3.3 Updating expansion card firmware 93

5.3.4 Enabling Option ROM scan 94

5.3.5 Reconfiguring the backup software solution 95

5.3.6 Resetting the boot retry counter 96

5.3.7 Resetting the error status after replacing memory modules or

CPU 97

5.3.7.1 Resetting the error status after replacing CPUs 97

5.3.7.2 Resetting the error status after replacing memory modules 99

5.3.8 Enabling the boot watchdog 101

5.3.9 Enabling replaced components in the BIOS 102

5.3.10 Verifying the memory mode 103

5.3.11 Verifying the system time settings 103

5.3.12 Viewing and clearing the System Event Log (SEL) 104

5.3.13 Updating the NIC configuration file in a Linux and VMware

environment 107

5.3.14 Resuming BitLocker functionality 108

5.3.15 Performing a RAID array rebuild 109

5.3.16 Looking for MAC/WWN/GUID and SAS addresses 110

5.3.16.1 Basic information 110

5.3.16.2 Looking for the MAC address of a LAN controller 110

5.3.16.3 Looking for the WWN address of a fibre channel controller 112

5.3.16.4 Looking for the GUID address of an infiniband or Omni-Path

controller 112

5.3.16.5 Looking for SAS addresses of SAS controllers for external

devices 113

5.3.17 Using the Chassis ID Prom Tool 114

5.3.18 Configuring LAN teaming 116

5.3.19 Switching off the ID indicator 117

5.3.20 Performing a fan test 118

6 Power supply unit (PSU) 121

6.1 Safety notes 121

6.2 Basic information 121

Content

Upgrade and Maintenance Manual RX4770 M5

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY RX220 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1p Manual de usuario

Fujitsu

Fujitsu Primergy CX250 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX100 S7 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX1330 M3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S2 Manual de usuario

Fujitsu

Fujitsu BX630 - PRIMERGY - S2 Dual Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX924 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX100 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S6 Guía

Fujitsu

Fujitsu Primergy BX920 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX920 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX4770 M6 Manual de usuario

Fujitsu

Fujitsu primequest 2400E2 Guía

Fujitsu

Fujitsu 1PRIMERGY RX600 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY GX2460 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX2540 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX800 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY CX122 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Manual de usuario

Fujitsu

Fujitsu T2555SC020IN Manual de usuario

Fujitsu

Fujitsu Primergy TX300 S4 Guía rápida

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario