Fujitsu PRIMEPOWER900 Manual de usuario
Edition September 2004
PRIMEPOWER900
Comments…Suggestions…Corrections…
The User Documentation Department would like to know your
opinion on this manual. Your feedback helps us to optimize our
documentation to suit your individual needs.
Fax forms for sending us your comments are included at the
back of the manual.
There you will also find the addresses of the relevant User
Documentation Department.
Copyright and Trademarks
This manual is printed
on paper treated with
chlorine-free bleach.
Copyright ©FujitsuSiemensComputers GmbH 2003, 2004.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
U41290-J-Z816-3-76 1
Environmental protection and service
The PRIMEPOWER systems have a long life expectancy, not only because of the excellent
expansion options they offer, but also because of the quality of the products.
As technology continues to develop, however, ever greater volumes of data will need to be
processed. More and more demands are being placed on storage capacity, speed and
computer system design. So when you eventually want to replace your PRIMEPOWER
system with a newer model and dispose of the old device, we can also offer you support in
this area.
Recycling old computer equipment is already a tradition at Fujitsu Siemens Computers: We
have been redeeming and reusing old computer systems for many years now. Even at the
design stage, particular emphasis is placed on the reusability of components and materials.
Your PRIMEPOWER system is manufactured to the greatest possible extent from environ-
mentally friendly materials that can be fully recycled.
Read on through the next sections for a brief look at some of the measures we have intro-
duced in an effort to protect the environment as well as our tips and suggestions for environ-
mentally friendly handling of your system.
Environmentally friendly product design and development
This product has been designed in accordance with the Siemens standard “environmentally
friendly product design and development”.
This means that the designers have taken into account critical factors such as durability,
selection of materials and coding, emissions, packaging, the ease with which the product
can be dismantled and the extent to which it can be recycled.
This saves resources and thus reduces the harm done to the environment.
Production and development of the PRIMEPOWER systems are certified in accordance
with the environment management system DIN ISO 14001.
Note on saving energy
If your device does not have to remain switched on permanently, only switch it on when you
are ready to use it and then switch it off again during long breaks and when you finish your
work.
Environmental protection and service
2 U41290-J-Z816-3-76
Note on dealing with consumables
Please dispose of printer consumables and batteries in accordance with local government
regulations.
Note on labeling plastic housing parts
Please avoid sticking your own labels on plastic housing parts wherever possible, since this
makes it difficult to recycle them.
Take-back, recycling and disposal
Our remarketing and recycling center is certified in accordance with the ECO Audit
Regulation of the European Community. Contact it for details on redeeming and reusing
devices and consumables within Europe:
Tel. +49 (0) 5251 8 18010
Fax +49 (0) 5251 8 18015
You can also consult your local Fujitsu Siemens Computers branch office/subsidiary.
Service
If you have any complaints in relation to missing/faulty parts, please contact the complaints
department of Fujitsu Siemens Computers:
Tel. +49 (0) 5251 8 22222
Fax +49 (0) 5251 8 22029
You can also submit complaints via the internet:
http://www.fujitsu-siemens.com/servers/quality/reklamation_us.htm
Email: reklamation.cs@fujitsu-siemens.com
If you have questions on setup or operation or if problems occur, please contact your local
service office.
Fujitsu Siemens Computers IT service can be reached on the internet
(http://its.siemens.de/helpdesk) under the heading “IT Service”.
You will also find information here on products, telephone numbers, etc. The information is
available in English and German.
The Call Management Center (CMC) can be reached in Germany as follows:
Tel. +49 01805 4040
Fax +49 01805 336779
U41290-J-Z816-3-76
FOR SAFE OPERATION
This manual contains important information regarding the use and handling of this
product. Read this manual thoroughly. Pay special attention to the section "NOTES
ON SAFETY." Use the product according to the instructions and information
available in this manual. Keep this manual handy for further reference.
Fujitsu and Fujitsu Siemens Computers make every effort to prevent users and
bystanders from being injured or from suffering damage to their property. Use the
product according to this manual.
ABOUT THIS PRODUCT
The PRIMEPOWER900 server is designed and manufactured for use in standard
applications such as office work, personal device, household appliance, and general
industrial applications. This product is not intended for use in nuclear-reactor control
systems, aeronautical and space systems, air traffic control systems, mass
transportation control systems, medical devices for life support, missile launch
control systems or other specialized uses in which extremely high levels of reliability
are required, the required levels of safety cannot be guaranteed, or a failure or
operational error could be life-threatening or could cause physical injury (referred to
hereafter as “high-risk” use). You shall not use this product without securing the
sufficient safety required for the high-risk use. If you wish to use this product for
high-risk use, please consult with sales representatives in charge before such use.
U41290-J-Z816-3-76
RADIO FREQUENCY INTERFERENCE STATEMENT
The following notice is for USA users only.
TRADEMARKS ACKNOWLEDGEMENTS
lUNIX is a registered trademark in the United States and other countries, licensed
exclusively through X/Open Company Limited.
lSun, Sun Microsystems, the Sun Logo, Solaris and all Solaris based marks and
logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the
U.S. and other countries, and are used under license.
lEthernet is a registered trademark of Xerox Corporation in the United States and in
certain other countries.
lAll SPARC trademarks are registered trademarks of SPARC International, Inc.
Products bearing SPARC trademarks are based on an architecture developed by
Sun Microsystems, Inc.
lAll other product names mentioned herein are the trademarks or registered
trademarks of their respective owners.
lSystem and product names in this manual are not always noted with trademark or
registered trademark symbols (), ().
Notice: This equipment has been tested and found to comply with the limits for a Class B
digital divice, pursuant to Part 15 of FCC Rules.These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING: Changes or modificaitions not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
U41290-J-Z816-3-76
The contents of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any
media without the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2003, 2004
U41290-J-Z816-3-76
Revision History
(1/2)
Edition Date Revised section
(Added/ Deleted/ Altered) Details
01 2003-02-07
2003-03-11
Altered: Order number of this
manual, “Revision History”,
Index, Comment Forms;
( see column “Details”for
more alterations).
Deleted: Chapter “Expansion
File Unit”.
Fujitsu Siemens Computers
adds its order numbers in
manual references, adapts the
specifications of power supply
units, power distributors and
power connectors to the server
systems supplied by Fujitsu
Siemens Computers, adds the
reference to the documentation
belonging to the
PRIMESTATION - the
standard hardware platform of
SMCs at Fujitsu Siemens
Computers -, adds a URL to
request for additional host-IDs,
and replaces the comment
forms.
02 2003-04-20
2003-07-14
Entire manual (addition and
correction)
F.3 (addition)
Technical brush-up
Error corrections
Addition of description for
expanded interleave mode and
3 CPU mode
Fujitsu Siemens Computers
reprocesses the manual in the
same way as the first manual
version.
Note: In this table, a revised section is indicated by its section number in the current
edition.
An asterisk (*) indicates a section in the previous edition.
(2/2)
Edition Date Revised section
(Added/ Deleted/ Altered) Details
03 2004-08-13
2004-09-10
Entire manual (correction)
Section 2.2.2 (correction)
Section 4.5.3 (addition)
Section 6.9 (addition)
Chapter 8 (correction)
Appendix D (deletion)
Error correction
Addition of specifications of
new models
Addition of description for PCI
Hot Plug
Addition of description for the
Fast Memory Mode
Correction of description for
the SMC
Deletion of description for the
Fast Memory Mode
Fujitsu Siemens Computers
reprocesses the manual in the
same way as for the first two
manual versions, except of the
following two changes: Dual
Power Feed is no longer part ot
the standard equipment of the
systems supplied by Fujitsu
Siemens Computers. The
respective changes made in the
former manual versions were
cancelled. And, besides the
PRIMESTATION, as second
type of SMC Fujitsu Siemens
Computers uses the
PW250SMC.
Note: In this table, a revised section is indicated by its section number in the current
edition.
An asterisk (*) indicates a section in the previous edition.
Tabla de contenidos
Otros manuales de Servidor de Fujitsu
Fujitsu
Fujitsu PRIMERGY BX600 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX900 S1 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX2550 M4 Manual de usuario
Fujitsu
Fujitsu BS2000 SE Series Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 3800E2 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de usuario
Fujitsu
Fujitsu PRIMERGY BX960 S1 Manual de usuario
Fujitsu
Fujitsu Primergy RX200 S4 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise T5120 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX200 S3 Guía
Fujitsu
Fujitsu BS2000 SE Series Manual de usuario
Fujitsu
Fujitsu PRIMERGY BX620 S4 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise T5440 Server Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise T5440 Server Manual de instrucciones
Fujitsu
Fujitsu PRIMERGY TX100 S1 Manual del propietario
Fujitsu
Fujitsu PRIMERGY BX900 Manual de usuario
Fujitsu
Fujitsu SPARC Enterprise T2000 Manual de instrucciones
Fujitsu
Fujitsu PRIMERGY BX600 Manual de usuario
Fujitsu
Fujitsu Primergy RX300 S3 Manual del propietario
Fujitsu
Fujitsu PRIMERGY TX150 S8 Manual de usuario
