Fujitsu Eternus DX80 S2 Manual
ETERNUS DX80 S2 and DX90 S2
Hardware Installation
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
Package Contents
Rack Mounting
Power Cabling
Backend Cabling QSFP
Power On Procedure
Power Off Procedures
Operator Panel -Function Button
Hardware Installation ETERNUS DX80 S2 and DX90 S2 Copyright Fujitsu Technology Solutions, Release August 2011
Content
1
Package Contents (1)
Controller Enclosure Kit
Installation poster
Documentation CD
Rack mount kit
Controller Enclosure
•Single Controller Module
•Dual Controller Module
Left and right Flange Cover
Push pin tool
2 x power cords
Safety Manual
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2 2
Package Contents (2)
Drive Enclosure Kit
Installation poster
Rack mount kit
Drive Enclosure
2 x power cords
1 x QSFP (SAS) cable
•Single IOM configuration
2 x QSFP (SAS) cables
•Dual IOM configuration
Safety Manual
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2 3
Rack Mounting (1)
For FTS (CEMEA &I) only
Rack-mount kit
Rack mount installation overview
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2 4
M5 Centering
screws (10 mm)
2U Bracket
Rack Mounting (2)
Attach the 2U Bracket to the right rear
rack pillar
The M5 centering screws should be
inserted in the 1st and 6th holes
above the base line of the
Enclosures
Insert the pins of the left hand
side slide rail in the 1st and
3rd hole
Start counting from the bottom
of the 2U Bracket
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
Base line of the
Controller Enclosure
5
M5 Cage nut
Rack Mounting (3)
Push the M5 cage nut into the
2nd hole of the front rack pillar
Above the base line of the Enclosures
At the left hand side fix the slide
rail to the front pillar with
The M5 centering screws
The M5 pan head screws
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
M5 Centering
screw (10 mm)
M5 Pan head
screw (10 mm)
Base line of the
Controller Enclosure
6
Rack Mounting (4)
For the left hand side rail
Insert the pins in the holes of the rear pillar
Fix the other side of the slide rail to the front pillar
•Repeat the same procedure as done before with the left hand side slide rail
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2
Base line of the
Controller Enclosure
M5 Cage nut
Base line of the
Controller Enclosure M5 Pan head
screw (10 mm)
M5 Centering
screw (10 mm)
7
Rack Mounting (5)
Front view of the rack installation
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2 8
Rack Mounting (6)
Fit the Controller Enclosure and/or Drive Enclosure to the rack
For better stability, a rack has to be filled by starting from the
bottom
Copyright Fujitsu Technology Solutions, Release August 2011
Hardware Installation ETERNUS DX80 S2 and DX90 S2 9
Otros manuales para Eternus DX80 S2
11
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Servidor de almacenamiento en red de Fujitsu
Manuales populares de Servidor de almacenamiento en red de otras marcas
HP
HP NetStorage 6000 Manual de usuario
Seagate
Seagate U10 ST320423A Manual de usuario
Synology
Synology RackStation RS816 Manual
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manual de usuario
Avid Technology
Avid Technology VideoRAID ST Guía de seguridad
Western Digital
Western Digital My Cloud Home Duo Manual de usuario
