Fujitsu 560H SERIES Manual de usuario

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

MEMORY CARD CONNECTORS

(PCMCIA CONFORMABLE)

560H SERIES

■FEATURES

• The connectors conform to the Japan Electronic Industry

Development Association (JEIDA) and Personal

Computer Memory Card International Association

(PCMCIA) standards Ver. 4.

• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).

Incorrect insertion is prevented. Hot system plugging is

possible (contact detection).

• Plugs have an easy-to-use ejection mechanism.

• Raised mounting type connectors (under which

components can be mounted) and low-profile connectors

are available.

• In addition to connectors for type I and type II cards, a

connector for type III cards has been provided.

• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided

mounting are available.

■PIN CONNECTOR (PLUG) CONTACT LENGTH

■SPECIFICATIONS

Item

Operating temperature range

Current rating

Voltage rating

Contact resistance

Insulation resistance

Dielectric withstanding voltage

Insertion/withdrawal life

Specification

– 55°C to + 85°C

DC 0.5 A

AC 250 V

40 mΩmax (6 VDC, 0.1 A)

1000 MΩmin. (500 VDC)

500 VAC for 1 minute

Industrial environment: 5,000 times

Office environment: 10,000 times

Contact type

Power, ground pins

Card detection pins

Other signal pins

Pin No.

1, 17, 34, 35, 51, 68

36, 67

Others

Contact length

5.0 mm (0.196 in.)

3.5 mm (0.137 in.)

4.25 mm (0.167 in.)

■MATERIALS

Plug body: PPS resin UL94V-0

: 6T nylon (for type III card connector) UL94V-0

Ejector: Polyester

PPS resin

(for SMT and type III card connectors)

Copper alloy

Contact: Gold over palladium over nickel

(PAGOS)

Terminal: Palladium

Specification

Item

Insulating material

Conductor

Plating

560HSeriesConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

■ORDERING PART NUMBER [PLUG]

V4: Conforms to Ver.4

E4: Conforms to Ver.4 and anti-ESD

Specification

Plating G: Gold plating

Number of contacts: 68, 136

Body P: Plug

Pin type 4: Straight

5: Right-angle

8: SMT

560 series connector

Fujitsu connector

FCN-56 5 P 068-G / XC-V4

■ORDERING PART NUMBER [SOCKET]

FCN-56 8 J 068-G / 0

Terminal type 0: PC board double-sided straddle type

PC board single-sided mounting type

Plating G: Gold plating

Number of contacts: 68

Body J: Socket

Pin type 8: SMT

560 series connector

Fujitsu connector

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE ((

((

(WITH NO EJECTOR, LOW-PROFILE TYPE))

))

)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Unit: mm (in.)

Part number: FCN-565P068-G/C-V4

(0.118) 4

(0.157)

1.51 (0.059)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

50.8 (2)

1.27 (0.05) ×(34-1) = 41.91 (1.65)

1.27 (0.05)

(0.118) 42 (1.65)

12.2 (0.48)

58.7 (2.31)

24.9 (0.98)

1.27 (0.05)

1.27 (0.05) ×(34-1) = 41.91 (1.65)

No.1

No.35 No.68

No.34

2- ø 2.8 (0.11)

2.5mm (0.098)

deep spot facing

3.6 (0.141)

Part number: FCN-565P068-G/01-V4

•

Models with a board lock (metal fitting for direct mounting) are also available.

Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)

FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)

• Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))

FCN-565P068-G/02-V4 (10 mm (0.394 in.))

• Models which support Type III are also available. Part number: FCN-565P068-G/17-V4

FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm

(0.063 in.) thick PC board )

Unit: mm (in.)

50.8 (2)

0.51 (0.02)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

7 (0.276)

3 (0.118)

11.2 (0.44)

5 (0.197) 1 (0.039)

4.25 (0.167)

3.5 (0.138)

2- ø 2.8 (0.110)

41.91 (1.65)1.27 (0.05)

59.7(2.35)

2.42 (0.095)

35.2 (1.39)

2.5mm (0.098)

deep spot facing

41.91 (1.65)

1.27 (0.05)

No.17

No.51 No.34

No.68

No.35

No.1

1.27 (0.05)

4 (0.157)

50.8 (2)

±0.1 (0.0039)

41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.3

No.1

No.2

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

No.68

2- ø 2.8 (0.110)

±0.1 (0.0039)

68- ø 1 (0.039)

±0.05 (0.0020)

(Card insertion side)

50.8 (2) ±0.1 (0.0039)

41.91(1.65)±0.1 (0.0039)

1.27 (0.05)±0.05 (0.0020)

No.3

No.1

No.2

5.715 (0.225) ±0.05 (0.0020)

3.810 (0.15) ±0.05 (0.0020)

1.905 (0.075) ±0.05 (0.0020) No.68

2- ø 2.8 (0.110)

±0.1 (0.0039)

68- ø 1 (0.039)

±0.05 (0.0020)

(Card insertion side)

Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.

In order to avoid damage to the connector, do not pull out the card at an angle.

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

0.51 (0.059)

3 (0.118)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

6 (0.236)

8 (0.315)

7 (0.276)

4.5 (0.177)

2.42 (0.095)

35.2 (1.385)

11.2 (0.441)

59.7 (2.35)

50.8 (2)

2- ø 2.2 (0.0866)

1.27 (0.05) × (34 – 1) = 41.91 (1.65)

1.27 (0.05)

No.1 No.17

No.35 No.51

No.34

No.68

1.27 (0.05)

53.7 (2.114)

8.5

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON

THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING

TYPE)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Unit: mm (in.)

Part number: FCN-565P068-G/F-V4

Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)

Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)

7 (0.276)2.5

(0.098)

1 (0.039)

5.715 (0.225)

3.810 (0.15)

1.905 (0.075)

0.51 (0.059)

2.42 (0.095)

35.2 (1.385)

11.2 (0.441)

59.7 (2.35)

50.8 (2)

1.27 (0.05)

1.27 (0.05) × (34 – 1) = 41.91 (1.65)

(2) M2.5 (0.098 in.)

thread nut

1.27 (0.05) × (34 – 1) = 41.91 (1.65)

1.27 (0.05)

No.68 No.51 No.35

No.1No.17No.34

4(0.157)

Unit: mm (in.)

• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4

• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)

• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)

50.8 (2)

±0.05 (0.0039)

1.27 (0.05) × (68/2-1) =

41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.34

No.68

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

No.35

68- ø 1 (0.039)

±0.05 (0.0020)

(Card insertion side)

2- ø 2.8 (0.110)

±0.1 (0.0039)

No.1

50.8 (2)

±0.1 (0.0039)

41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.3

No.1

No.2

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

No.68

2- ø 2.8 (0.110)

±0.1 (0.0039)

68- ø 1 (0.039)

±0.05 (0.0020)

(Card insertion side)

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Unit: mm (in.)

Part number: FCN-565P068-G/A-V4

3 (0.118) 4.5 (0.177)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

6 (0.236)

11.2 (0.441)

50.8 (2)

1.27 (0.05) × (34–1) = 41.91 (1.65)

1.27 (0.05)

59.7 (2.35)

2.42 (0.095)

35.2 (1.39)

2- ø 2.8 (0.110)

1.27 (0.05) × (34–1) = 41.91 (1.65)

1.27 (0.05)

3 (0.118)

No.1 No.17 No.34

No.68No.51No.35

2.5mm (0.098)

deep spot facing

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

2- ø 2.8 (0.110)

±0.1 (0.0039)

68- ø 1 (0.039)

±0.05 (0.0020)

1.27 (0.05)

50.8 (2)

±0.1 (0.0039)

±0.05 (0.0020)

1.27 (0.05) × (68/2-1) =

41.91 (1.65)

±0.1 (0.0039)

No.35

No.1

No.68

No.34

6.7 (0.264)

±0

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)

■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Unit: mm (in.)

Part number: FCN-565P136-G/0-V4

(0.276) 7

(0.276)

1.905 (0.075)

1.905 (0.075) ×(8-1) = 13.335 (0.525)

35.2 (1.39)

11.2 (0.441)

2.42 (0.095)

59.7 (2.35)

50.8 (2)

11 (0.433)

(0.118)

4 (0.157)

No.35

No.1

No.35 No.1

No.34

No.68

No.34

No.68

1.905 (0.075)

±0.05 (0.0020)

No.35

No.1

1.905 (0.075) × (8-1)

= 13.335 (0.525)

No.1

No.35

±0.1 (0.0039)

50.8 (2)

1.27 (0.05) × (68/2-1)

= 41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.34

No.68

No.34

No.68

±0.05 (0.0020)

2- ø 2.8 (0.110)

±0.1 (0.0039)

136- ø 1 (0.039)

±0.05 (0.0020)

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS

Part number: FCN-565P068-G/C34-V4

*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4

Unit: mm (in.)

■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Unit: mm (in.)

50.8 (2) ±0.1 (0.0039)

1.27 (0.05) × (68/2-1)

= 41.91 (1.65) ±0.1 (0.0039)

1.27 (0.05) ±0.05 (0.0020)

No.1

No.35

5.715 (0.225)±0.05 (0.0020)

3.810 (0.15) ±0.05 (0.0020)

1.905 (0.075)±0.05 (0.0020) No.68

No.34

2- ø 2.8 (0.110)±0.1 (0.0039)

±0.05 (0.0020)

68- ø 1 (0.039)

0.51 (0.02)

3 (0.118)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

(0.276) 59.7 (2.35)

50.8 (2)

2- ø 2.8 (0.110)

2.42 (0.095)

35.2 (1.386)

11.2 (0.441)

No.1

No.35

No.34

No.68

7 (0.276)

4 (0.157)

59 (2.32)

2.5mm (0.098)

deep spot facing

83.38 (3.283)*A

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS

Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)

Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)

Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)

7 (0.276)

3 (0.118)

0.51 (0.020)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

35.2 (1.386) 2.42 (0.095)

11.2 (0.441)

8 (0.315)

83.38 (3.283)

67.31 (2.65)

59.7 (2.35)

50.8 (2)

34 (1.339)

4.25 (0.167)

3.5

(0.138)

36 (1.417)

40 (1.574)

R 1.4

3.7 (0.146)

10 (0.394)

78.5 (3.091)

59 (2.323) 42 (1.654)

35.5 (1.398)

7 (0.276) 11 (0.433)

4.8 (0.189)

2.1 (0.083)

4 (0.157)

No.1 No.17

No.35 No.51 No.68

No.18 No.34

No.52

ø 2.8 (0.110)

2- ø 2.8 (0.110)

2.5mm (0.098)

deep spot facing

5 (0.197)

A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,

instead of FCN-565P068-G/XC-V4.

■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

50.8 (2)

±0.1 (0.0039)

41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.3

No.1

No.2

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

No.68

2- ø 2.8 (0.110)

(Card insertion side)

34 (1.339)

±0.05 (0.0020)

67.31 (2.65)~68.0 (2.677)

40 (1.574)

±0.1 (0.0039)

4- ø 2.8 (0.110)

±0.1 (0.0039)

±0.05 (0.0020)

68- ø 1 (0.039)

Unit: mm (in.)

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)

SUPPORTS TYPE I, II CARDS

■DIMENSIONS

Part number: FCN-565P068-G/MC-V4 (Button color: Black)

Part number: FCN-565P068-G/C22-V4 (Button color: Beige)

Unit: mm (in.)

7 (0.276)

3 (0.118)

0.51 (0.020)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

35.2 (1.386) 2.42 (0.095)

11.2 (0.441)

8 (0.315)

83.38 (3.283)

67.31 (2.65)

59.7 (2.35)

50.8 (2)

34 (1.339)

4.25 (0.167)

3.5

(0.138)

36 (1.417)

40 (1.574)

R 1.4

3.7 (0.146)

10 (0.394) 78.5 (3.091)

59 (2.323)

42 (1.654)

35.5 (1.398)

7 (0.276) 11 (0.433)

4.8 (0.189)

2.1 (0.083)

4 (0.157)

No.1 No.17

No.35 No.51 No.68

No.18 No.34

No.52

2- ø 2.8 (0.110)

2.5mm (0.098)

deep spot facing

5 (0.197)

ø 2.8 (0.110)

■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of

FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.

50.8 (2)

±0.1 (0.0039)

41.91 (1.65)

±0.1 (0.0039)

1.27 (0.05)

±0.05 (0.0020)

No.3

No.1

No.2

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

No.68

2- ø 2.8 (0.110)

(Card insertion side)

34 (1.339)

±0.05 (0.0020)

67.31 (2.65)~68.0 (2.677)

40 (1.574)

±0.1 (0.0039)

4- ø 2.8 (0.110)

±0.1 (0.0039)

68- ø 1 (0.039)

±0.05 (0.0020)

Unit: mm (in.)

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE

MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS

■DIMENSIONS

Unit: mm (in.)

Part number: FCN-565P068-G/XF-V4 (Button color: Black)

Part number: FCN-565P068-G/PF-V4 (Button color: Beige)

2.5

7 (0.276)

0.51 (0.020)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

35.2 (1.386) 2.42 (0.095)

11.2 (0.441)

8 (0.315)

83.38 (3.283)

67.31 (2.65)

59.7 (2.35)

50.8 (2)

34 (1.339)

4.25 (0.167)

3.5

(0.138)

36 (1.417)

40 (1.574)

R 1.4

3.7 (0.146)

10 (0.394)

78.5 (3.091)

4.8 (0.189)

42 (1.654)

35.5 (1.398)

7 (0.276)

1 (0.039)

2.5mm (0.098)

deep spot facing

59 (2.323)

2.1 (0.083)

4 (0.157)

No.68 No.35

No.1No.34

ø 2.8 (0.110)

When a card is ejected

When a card is inserted

5 (0.197)

Unit: mm (in.)

■

PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

■MOUNTING EXAMPLE

50.8 (2)±0.1 (0.0039)

1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)

1.27 (0.05)±0.05 (0.0020)

No.34 No.1

No.68

5.715 (0.225)±0.05 (0.0020)

3.810 (0.15) ±0.05 (0.0020)

1.905 (0.075)±0.05 (0.0020)

68- ø 1 (0.039)

±0.05 (0.0020)

Ejector button

34 (1.339) ±0.05 (0.0020)

67.31 (2.65)~68.0 (2.677)

40 (1.574)±0.1 (0.0039)

4- ø 2.8 (0.110)

±0.1 (0.0039)

No.35

Regardless of how the connector is mounted on the PC

board, a card can be inserted with its face upward.

Nut buried

560HSeries ConnectorConforming toVer. 4

Dimensions are in millimeters (inches) www.fcai.fujitsu.com

Specifications

subject to change

RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK

MOUNTING TYPE) SUPPORTS TYPE I, II CARDS

■DIMENSIONS

Part number: FCN-565P068-G/W-V4

■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)

The connector is mounted on a PC board so that only its terminal connection part rests on the board.

5.715 (0.225)

±0.05 (0.0020)

3.810 (0.15)

±0.05 (0.0020)

1.905 (0.075)

±0.05 (0.0020)

1.27 (0.05)

50.8 (2)

±0.1(0.0039)

±0.05 (0.0020)

41.91 (1.65)

±0.1 (0.0039)

No.1

No.68

6.7

No.2 No.3

(Card insertion side)

2- ø 2.8 (0.110)

68- ø 1 (0.039)

±0.1(0.0039)

±0.05 (0.0020)

■MOUNTING EXAMPLE

M2.5 screw

Nut

Mounting height

4.5mm(0.177in.)

Nut

Unit: mm (in.)

3 (0.118)

6 (0.236)

0.51 (0.020)

1.905 (0.075)

3.810 (0.15)

5.715 (0.225)

4.5

(0.177)

2.5 (0.098) 2.1

(0.083)

5 (0.197) 3 (0.118)

67.31 (2.65)

59.7 (2.35)

50.8 (2)

34 (1.339)

2.42 (0.095)

11.2 (0.441)

8 (0.315)

ø 2.8

3.5

(0.138)

35.2 (1.386)

R 1.4

2- ø 2.8 (0.110)

83.38 (3.283)

3.7 (0.146)

10 (0.394)

When a card is ejected

When a card is inserted

11 (0.433)

78.5 (3.091)

42 (1.654)

35.5 (1.398)

7 (0.276)

2.1 (0.083)

No.68

No.35

No.1 No.34No.17

No.51 2.5 (0.098)

5 (0.197)

4.25 (0.167)

Tabla de contenidos

Otros manuales de Hardware de computadora de Fujitsu

Fujitsu

Fujitsu FM3 family Manual de usuario

Fujitsu

Fujitsu MB91460 SERIES FR60 Manual de usuario

Fujitsu

Fujitsu MPA3022AT Manual de usuario

Fujitsu

Fujitsu T5010 - LifeBook Tablet PC Manual de usuario

Fujitsu

Fujitsu LQFP-64P Manual de usuario

Fujitsu

Fujitsu 8FX Manual de usuario

Fujitsu

Fujitsu MB86R12 Manual de instrucciones

Fujitsu

Fujitsu PRIMERGY PG-RSB104 Manual de usuario

Fujitsu

Fujitsu DESKPOWER C600 Series Manual de usuario

Fujitsu

Fujitsu MB15C101 Manual de usuario

Fujitsu

Fujitsu SK-86R12-CPU01 Manual de usuario

Fujitsu

Fujitsu EVB JADE--D Manual de usuario

Fujitsu

Fujitsu IdeaBoxx Jade Manual de usuario

Fujitsu

Fujitsu FR Family FR60 Lite Manual de usuario

Fujitsu

Fujitsu LAVENDER Manual del operador

Fujitsu

Fujitsu ESPRIMO P7XX Manual de usuario

Fujitsu

Fujitsu GP5-FC102 Manual de usuario

Fujitsu

Fujitsu PRIMERGY Tape Drv DAT72 Manual de usuario

Fujitsu

Fujitsu CELSIUS W4 Series Manual de usuario

Fujitsu

Fujitsu MB2147-541 Manual de usuario

Fujitsu

Fujitsu FMW42CR1 Manual de usuario

Fujitsu

Fujitsu F2MC-16L Series Manual de usuario

Fujitsu

Fujitsu MB2198-16FX-120P-M21 Manual de usuario

Fujitsu

Fujitsu PG-1863 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario