FujiFilm Frontier DL600 Manual de usuario

Unpacking Manual



Rev. C

DL600 Installation Manual

UNPACKING

C H A P T E R

UNPACKING

1.1 Unpacking

DL600 Installation Manual

1.1 Unpacking

1.1.1 Unpacking the Main Body

C A U T I O N The printer weighs 155 kg when packed. So, be extremely

careful when unpacking it.

Unit: mm

1,039 mm

1,275 mm

915 mm

C A U T I O N The weight of the printer is approximately 120 kg. When

moving or lifting the product, be sure to work with more

than three people using the handles shown in the figure

below.

When the printer is carried by three workers, two

workers should hold the paper feed side because the

paper feed side is much heavier than the paper ejection

side.

Be sure to lift the product in a comfortable position. If the

product is lifted in an awkward position, the worker may

be injured or the product may be damaged.

When setting the product down, be careful not to get your

fingers caught between the product and the installation

surface.

Paper ejection side

Paper feed side

1.1 Unpacking

DL600 Installation Manual

1. Take off the four polypropylene straps and remove the “upper outer

box” by lifting it upwards.

Figure 1-1. Unpacking the Main Body (1)

2. Remove the following cushioning materials and the inner

packaging box.

Figure 1-2. Unpacking the Main Body (2)

C A U T I O N When removing the upper outer box, be careful of the Front

Roll of the printer because it rises automatically.

Table 1-1. List of Cushioning Materials/Inner Packaging Box

No. Cushioning Materials/Inner Packaging Box Quantity Bundled Items

1 Printer Side Rear Padding 2 No

2 Printer Side Front Padding 2 No

3 Printer Front Padding R 1 Yes

Upper outer box

Polypropylene

straps

Polypropylene

straps

4 Printer Front Padding L 1 Yes

5 Roll Paper Holder Padding R 1 No

6 Roll Paper Holder Padding L 1 No

7 Inner packaging box, manual 1 Yes

8 Printer Padding Top 1 No

Table 1-1. List of Cushioning Materials/Inner Packaging Box

No. Cushioning Materials/Inner Packaging Box Quantity Bundled Items

Bottom outer box

NOTICE!!

THESE BOXES

CONTAIN

PRINTER

ACCESSORIES!

DO NOT

DISCARD!

1.1 Unpacking

DL600 Installation Manual

3. Open the Printer Rear Padding R (3), Printer Rear Padding L (4)

and inner packaging box with the manual (7), and confirm that all

of the following bundled items are included with the product.

Note "*": Supported in Japan and North America.

4. Unfold the four sides of the “bottom outer box”.

5. Push the main body and the cushioning materials from the paper feed

side, and slide the main body and the

“bottom outer box” partially off the pallet to the position shown below.

6. Lift the printer's paper feed side, and pull out the Pallet.

Figure 1-3. Unpacking the Main Body (3)

Table 1-2. Item

No. Location Stored

(Packaging Material) Item Quantity

Printer Rear Padding R Tray 1

Cleaning Sheet (2 sheets) 1

BEMCOT (150 sheets) 1

Printer Rear Padding L Flange 4

Screws to attach flanges 4

Spindle 2

Inner packaging box,

manual

INSTRUCTION MANUAL

(Operating instructions/

Condition Setup and Maintenance)

CD-ROM (Online manual, software) 1

CD-ROM (Printer Data) 1

CD-ROM (Parts list) 1

Ribbon cartridges 2

Power supply cable* 1

USB cable 1

Paper Band 2

Cap 2

bottom outer box

Pallet

Cushioning materials

on the paper feed side

Open the Printer Rear Padding R

(3), Printer Rear Padding L (4)

and inner packaging box with the ma

nual (7), and confirm that all

of the following bundled items ar

e included with the product.

1.1 Unpacking

DL600 Installation Manual

7. Lift the printer’s right side, and pull out the cushioning material on

the right side. (Figure. 1-4)

8. Lift the printer's left side, and pull out the cushioning material on

the left side in the same manner as step7.

Figure 1-4. Unpacking the Main Body (4)

9. Lift the paper ejection side of the main body, and pull out the

cushioning material on the paper ejection side. (Figure. 1-5)

10. Lift the paper feed side of the main body, and pull out the

cushioning material on the paper feed side in the same manner as

step9.

Figure 1-5. Unpacking the Main Body (5)

Cushioning material on left side

Cushioning material on right side Cushioning material

on paper ejection side

Cushioning material

on paper feed side

Right

LEFT

1.1 Unpacking

DL600 Installation Manual

11. Remove the protective sheet from the main body.

Figure 1-6. Unpacking the Main Body (6)

12. Move the main body from the “bottom outer box” and the bottom

protective sheet.

1.1.2 Unpacking the Optional Items

Protective sheet

Protective sheet C A U T I O N The printer weighs 57.5 kg when packed. So, be extremely

careful when unpacking it.

Unit: mm

720 mm

1,380 mm

932 mm

1.1 Unpacking

DL600 Installation Manual

1. Unbind the two polypropylene straps and remove the “upper outer

container” by lifting it upwards.

2. Remove the two cushioning materials

3. Remove the packaging box (Long Paper Ejection Unit) and

packaging box (Conveyer).

Figure 1-7. Unpacking the Optional Items (1)

4. Remove the eight cushioning materials.

Figure 1-8. Unpacking the Optional Items (2)

Upper outer container

Packaging box

(Long Paper Ejection Unit)

Packaging box

(Conveyer)

Cushioning material

1.1 Unpacking

DL600 Installation Manual

5. Lift the Sorter and remove it.

6. Remove the plastic sheets from the Sorter.

Figure 1-9. Unpacking the Optional Items (3)

7. Hold the packaging box by the handles, and remove the Long Paper

Ejection Unit together with the packaging box.

8. Remove the two pieces of tape that secure the two cables and

remove the Long Paper Ejection Unit from the packaging box.

9. Remove the plastic sheets from the Long Paper Ejection Unit.

Figure 1-10. Unpacking the Optional Items (

)

Sorter

Long Paper Ejection Unit

Packaging box

Handle

Cable

Tape

This completes the unpacking.

Otros manuales para Frontier DL600

Otros manuales de Impresora de FujiFilm

FujiFilm

FujiFilm instax SHARE SP-2 Manual de usuario

FujiFilm

FujiFilm instax SHARE SP-2 Manual de usuario

FujiFilm

FujiFilm Frontier LP7500 Cómo utilizar

FujiFilm

FujiFilm FM-DP L Manual de usuario

FujiFilm

FujiFilm Frontier-S DX100 Manual de usuario

FujiFilm

FujiFilm Frontier 570 Instrucciones de instalación

FujiFilm

FujiFilm CX-400 Manual de usuario

FujiFilm

FujiFilm Xerox Phaser 6270 Manual de usuario

FujiFilm

FujiFilm Apeos C8180 Manual de usuario

FujiFilm

FujiFilm Apeos 3570 Manual de usuario

FujiFilm

FujiFilm ASK-2500 Manual de usuario

FujiFilm

FujiFilm DryPix 7000 Manual de usuario

FujiFilm

FujiFilm ASK-300 Manual de usuario

FujiFilm

FujiFilm Frontier-S DX100 Manual de usuario

FujiFilm

FujiFilm ApeosPort V C7785 Manual de usuario

FujiFilm

FujiFilm ApeosPro C810 Manual de usuario

FujiFilm

FujiFilm Instax Share SP-1 Manual de usuario

FujiFilm

FujiFilm instax mini Link Manual de usuario

FujiFilm

FujiFilm CX-550 Manual de usuario

FujiFilm

FujiFilm Xerox Phaser 6270 Manual de usuario

FujiFilm

FujiFilm Apeos C7070 Manual de instrucciones

FujiFilm

FujiFilm DL410 Cómo utilizar

FujiFilm

FujiFilm instax SQUARE Link Manual de usuario

FujiFilm

FujiFilm instax mini Link 2 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario